Fiberglass Research Archives

To Top

One Piece Fiberglass Front End Stanwood, WA **SOLD**

• CATEGORIES: CJ-2A, CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $150.

This appears in good shape.

“One pc. fiberglass front end
New, used for mock up
fits CJ2A, CJ3A, M38A1
also fits 1942 – 45 flat fenders……..$150.00 obo

Blinkers and S.S.hinged tilt set up extra $

Cage front hoop and 2 bars for jeeps listed above…..$40.00 obo”

fiberglass-front-end-stanwood-wa

 
To Top

1947 Flattie Hemet, CA **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Was $4800. **SOLD**

This looks like a clean build. The front springs are reversed. The rears might be outboarded, but I can’t tell for sure.

“New Fiberglass body, Nice Paint, 4.3 Vortech motor, brand new top, Has bedliner flooring, Cage, This is a super clean Jeep.”

1947-flattie-fiberglass-hemet-ca1 1947-flattie-fiberglass-hemet-ca2 1947-flattie-fiberglass-hemet-ca3

 
To Top

Fiberglass Flattie Project Lost Creek, WV $1500

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

This is a project with customer axles.

“This is a Willys Jeep I had got to finnish and do not have enough time to work on it, the jeep tub is fiberglass it is sitting on chevy 1/2 ton rears it has a 4.3 engine, The frame has been striped and painted the, trans low with a three speed it has two bucket seats I have been looking at the tubs and found they’re about $3,500 the one on this jeep has been cut around the fire wall not sure why it is a good project”

http://morgantown.craigslist.org/cto/3594490057.html

year-flattie-fiberglass-lostcreek-wv1

year-flattie-fiberglass-lostcreek-wv2

 
To Top

1942 Flattie Auburn, CA $3500

• CATEGORIES: GPW (Ford MB), MB • TAGS: This site contains affiliate links for which I may be compensated.

This project is a fiberglass body on MB/GPW running gear.

“I have a 1942 cj2a for sale. It has a buick v6 motor with a sm465 transmission and a dana 20 transfer case. It is a fiberglass body with a nice red paint job. it is a little bit of a project, the electrical is 90 percent done all that is left is all the wiring for the gauges. the motor turns over and it will start. the linkage for the transmission and pedals still needs to be hooked up and it needs a gas tank, I have a gas tank that will go with it but its not a direct fit. the shallow exhaust manifold is mounted so it clears the steering rod. i bought it from a guy who had 5 other jeeps and didn’t have the time to work on this one. it has 32 inch bfg all terrains. The vehicle is currently non-op. with a little more time it would be a head turner. i am entering the chp academy soon and this is my third vehicle. feel free to come look at it and make an offer. 530 906 4645”

http://sacramento.craigslist.org/cto/3568506776.html

1942-flattie-sacramento-ca

 
To Top

Fiberglass Flattie Body Bellflower, CA **SOLD**

• CATEGORIES: Body Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1200.

The tub appears in good shape. This looks like a light fiberglass model, maybe acme or AJs?

“Fiberglass jeep tub $1200 o.b.o”

fiberglass-tub-bellflower-ca

 

 
To Top

Fiberglass Tub + Chassis Oxford, ME **SOLD**

• CATEGORIES: CJ5, Racing • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1000

Here’s some parts that include a fiberglass racing tub.

“fiberglass off road jeep tub great start for your skimmer sweet paint

just the tub $700 obro

$450 for the front and reared with springs came out of a dodge ram charger

$1000 for whole thing with diff tiers
or trade for set of 285-75-16 tiers
chevy / GMC 6 lug wheels 6 on 5.5 bult patern
or possible trades of jeep tj
or chevy of gmc stuff
or fisher plow or try me
or atv
or snowmobeal
or a jeep of any tipe such as a xj yj tj wj zj”

cj5-fiberglass-tub-with-chassis1 cj5-fiberglass-tub-with-chassis2

 
To Top

1964? Parkette Body and Parts Calhoun, GA **Status Unknown**

• CATEGORIES: CJ-3A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE:**Status Unknown** Was $500. Note the hood looks like a teardrop Bobcat style.

Except for the dash, the body looks good.  This is the third Parkette body I’ve seen in Georgia.

“Its 1946 frame with a 1964 fiber glass body on it. It has been painted with truck bed liner I have a tranny and transfer case that is good. The body’s in good shape its has a few places where the fiberglass has spider webbing. It has a few parts that come with it. I got in on trade just putting it on here to see what else is out there trades are welcome.”

1964-parkette-body-calhoun-ga4

 
To Top

Fiberglass Flattie Shell Buena Park, CA **SOLD**

• CATEGORIES: Body Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $500.

(10/31/2012) This is just a shell with a solid front clip.

“1951 fiberglass willys jeep body. Body is in good condition asking 500.00”

 
To Top

1947 CJ-2A Mariposa, CA $1000

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

The windshield looks like a nicely modified cj-2a windshield to me.

“Fiberglass bodied CJ2A, needs a grill, rollbar, and steering column. Comes with stronger spare 3B frame, 4.3 liter chevy V6, adapter bell housing, T90 transmission and Spicer D18 transfer case. Has custom stainless steel filler necks on both sides of Jeep. Includes wiring harness. $1000 OBO, call to see, (559) 760-1946”

http://fresno.craigslist.org/cto/3488368313.html

1947-cj2a-fiberglass-mariposa-ca3 1947-cj2a-fiberglass-mariposa-ca2 1947-cj2a-fiberglass-mariposa-ca1

 
To Top

1964 M-38A1 Whitehouse, Oh eBay

• CATEGORIES: M-38A1 • TAGS: This site contains affiliate links for which I may be compensated.

This looks nice at first glance, but the gauges aren’t hooked up and the body is fiberglass.

“Older frame up restore but still in top condition. Runs perfect, drives perfect, always garage kept. You wouldn’t know your driving a 48 year old vehicle. Drives straight down the road. Does 62 MPH. Been to many shows. Always starts right up. Has silicone brake fluid (dot 5) so you will never have moisture in your brake system. Lined gas tank so you will never have a problem with that. Engine has less than 5000 miles on it since rebuild. Front oil seal will leak if it isn’t driven for a few months. Engine, trans., transfer case, and title are from 1964 jeep cj. Has lock out hubs on front axle. 4×4 works like it should. Using 12 volt system, gages are 24 volt so they are not hooked up. Have a mech. oil press. gage under the hood just to be safe. Original speedometer quit working at 35,000 miles so I put this one in and it quit working 200 miles later it reads 18,000 miles. Tub was replaced with fiberglass tub. Rear view mirror is cloudy so I have a clip on mirror over it in the photos. Top looks like it was rarely used it’s in great condition also and is simple to put on. Undercariage looks great. Tires are like new. Clutch works smooth. Trans. shifter feels solid. Gets compliments everywhere I go.”

View all the information on eBay

1964-m38a1-whitehouse-oh

 
To Top

1946 CJ-2A Body and Front Clips Herman, MN $500

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

This looks to be a VEC body, but the back has been changed.

“1946 ? Willys CJ2A BODY. No title … I am selling just the body and 2 front clips… one steel front and one fiberglass front. back of body has been rebuilt/customized. small amount of rust in the floor. good rat rod hot rod or mud truck body. $500 for the body with both clips… will not split it up. may be open to some trades”

http://minneapolis.craigslist.org/hnp/cto/3480498593.html

1946-body-parts-herman-mn2 1946-body-parts-herman-mn1

 
To Top

Fiberglass Flattie Woodland, WA **SOLD**

• CATEGORIES: CJ-3A, Features • TAGS: , , , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was on eBay.

I’ve seen additional pictures of this.  It is a well built flattie!

“WILLYS cj3a. Bobcat glass body, stainless fender’s, grill, tail gate. Postal Jeep frame, high pinion 44’s front & rear, locker’s front & rear, disc both ends. ,RSJ power streeing box, 350 Engine, top loader 4sp, holley carb & intake. HEI, march pulley’s, on board air, stainless fan shroud, 18gal stainless fuel tank, polished aluminum roll bar incorporated into the frame. Vintage gauge’s, clutch & brake & heater all by vintage. Heater and defrost built in to roll bar,. Billet wheel & steering colum. This Willys drives like new…”

 
To Top

1946 Fiberglass Flattie Body Elkhart, IN $500

• CATEGORIES: Body Parts, Racing • TAGS: This site contains affiliate links for which I may be compensated.

Rough.

“1946 Willys Fiberglass Body 4 pieces $500. Or Best Offer(CALL) (574)300-6218 Leave Voice Message NO text on service.”

http://southbend.craigslist.org/pts/3460523567.html

 
To Top

1946 CJ-2A Akron, OH $5000

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  Still Available

(09/28/2012) Bob spotted this one.  That sure looks like a Bobcat fiberglass body to me, based on the wide rear top lip and the steps that taper to the body fold.

“1946 Willys CJ 2
Rare fiberglass, flat fender, military style body.
1960’s Chevy Iron Duke 4 Cylinder engine. 3 speed high and low 4 wheel drive
Summit Racing seats and cushions
Custom pedals
New bikini top
New Cragar Wheels
Wrangler Tires
Some custome diamond plating and ’65 Mustang tail lights
Newer military OD green paint. Alot of work was done to this car.

Call Rick at 330-753-0553

http://akroncanton.craigslist.org/cto/3447453825.html

 
To Top

Fiberglass Body Eaton Rapids, Mi $1500

• CATEGORIES: Body Parts, CJ5 • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Still Available

“I have for sale a NEW Willys Jeep Fiberglass tub with front end. Should fit Willys Jeep CJ5s from 1955 to 1979. Ready to be mounted on your frame and painted. Fiberglass will never rust and gives your Jeep restoration a professional look.
For more information, Call Ralph @ 517.582.1104

http://lansing.craigslist.org/cto/3431731453.html

 
To Top

1945 MB? Boonville, NY **SOLD**

• CATEGORIES: MB • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500.

This has a fiberglass body.  It has a strange roll bar.

“I am selling my 1945 jeep willy’s. It’s a project jeep but it does run and drive. It has a fiberglass body that need a couple patches but nothing major. It has been lifted and has a GM v6 engine. If you are looking for a jeep to restore to stock this isnt for you. But if you want a fun project to go off roading this would be perfect. I hate to sell it but I just don’t have the time to mess with it. I really would like to sell it before the snow flies. $2500 obo.”

 
To Top

1951? CJ-3A? Battle Creek, MI **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:**SOLD** Was $3500.

(07/23/2012) 2 door, rebuilt motor with about 500 miles on it, 4 x 4, Manual, clear title, 4 cyl.

Here is a nice rare vehicle waiting for a new owner. Heater blower motor needs to be hooked up and is sitting in the back seat. The top is also included. Rebuilt motor has about 500 miles on it. This deal is worth checking out. $3500.00 or best offer.
BUY THIS DEAL NOW!

 
To Top

1948 CJ-2A Spokane, WA **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Orange jeep was for sale here in 2012. **Sold in late 2012 (listed for $5500 with another jeep). Relisted in 2015 with a hood bumped added.

This appears to have a fiberglass body, but I can’t tell for sure.  This was for sale back in April.  Since then it looks like it was painted. The top has definitely been painted.

“Have 1948 willys jeep with snow plow and lots of extra and New parts Have a 1946 willys to go with asking price or will separate. Has new tires,rims, springs, battery, hood. To much to list”

http://spokane.craigslist.org/cto/3402375703.html

 
To Top

1965 CJ-3B (with glass body) Fenton, MI **SOLD**

• CATEGORIES: CJ-3A, CJ-3B • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4500

Someone turned this highhood into a lowhood.

“1965 CJ 3B 4X4 With an A fiberglass body
Metal fenders and windshield some rust
Front seats and a double removable foldable back set. The driver seat has an adjustable slider
Center storage between front seats.
Storage space is water tight and weather proof, holds CD player and is all lockable.
Two cup holders
Best Top top
Buick 225 motor. 6 cylinder; Rebuilt in 2008
Have all receipts for motor rebuild
Coil upgraded to distributor
ADAM 810-936-7000 ext 202
Dry cell 12 volt
Interior Rhino Lined
Under coated in 2011
New clutch and transfer case”

 
To Top

Year? CJ-5 Treasure Coast, FL $1500

• CATEGORIES: CJ5 • TAGS: This site contains affiliate links for which I may be compensated.

This has a fiberglass body.  There’s some value here.

“ENGINE ,TRANS , FRT, REAR, VERY CLEAN FRAME, FUEL INJECTION SYSTEM BRAND NEW IN BOX, COMPLETE JEEP JUST NEEDS TO BE PUT TOGETHER, SOOO MANY PARTS 772-985-4488 ”

http://treasure.craigslist.org/pts/3378826303.html

 
To Top

Fiberglass Flattie Deep River, IA $2000

• CATEGORIES: CJ-2A, CJ-3A • TAGS: , , This site contains affiliate links for which I may be compensated.

There appears to be some value here, but it doesn’t look like it runs though.

“43 flat finder fiber glass replica willys, 300 horse LT1, 350, turbo 400 with stage 2 shift kit, and a 488 posi. Custom paint custom rollbar. Includes 2 paddle tires. This is one of my projects but gotta sell it to move. $2000 obo for the willys . . . All for sale and all must go. Call me if interested 303.590.8762 my name is jeff ”

http://denver.craigslist.org/cto/3375634488.html

 
To Top

Fiberglass Bobcat? CJ-3B Body Spanaway, WA **SOLD**

• CATEGORIES: Body Parts, CJ-3B • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $1600.

(10/16/2012) This includes stainless fenders and tailgate.  It looks like a great price.

“New fiberglass jeep high hood body, stainless steel fenders and tailgate, fiberglass hood and grille, new steel windshield frame, has new diamond plate $1,600**”

 
To Top

1947 CJ-2A Mission Viejo, CA **SOLD**

• CATEGORIES: CJ-2A • TAGS: , , , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was on eBay

Here’s an interesting jeep. It has an unusual paint job, an unusual roll cage and unusual rear lights.

“SELLING MY 1947 WILLIES JEEP. HAS HAD A LOT OF CUSTOM WORK DONE TO IT AS WELL AS NORMAL REPAIRS. NEW INTAKE AND CARBURATOR. NEW FRONT BRAKES(DRUM STYLE) NEW CLUTCH NEW SEATS NEW STEREO JUST A FUN LITTLE PROJECT THAT I DO NOT CURRENTLY HAVE TIME TO FINISH.”

1947_cj2a_missionviejo2

1947_cj2a_missionviejo3

 
To Top

1958 CJ-3B Calverton, NY eBay

• CATEGORIES: CJ-3B • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Still Available

(08/08/2012) This has a fiberglass body.  I don’t understand chopping the windshield though.

“So I always wanted to build a Crawler /  Trail Jeep using the best Willys stuff and a few choice Chevy parts. I started with an M38A1 1/4 ton military Jeep frame. I chose this frame because its boxed and shackle reversed from the factory for the best offroad performance.  I retained the original 5:38 ratio gears in the model 44 rear/model 25  front axels. They are mounted with a full spring over axel system, including adjustable anti-wrap link on diff. A Saginaw power steering system helps turn the Goodyear MTR military surplus HUMVEE Tires, 37 inch units, the latest issued. the rear boasts 11 inch drum brakes while the fronts are stock.

For the running gear I wanted the best horsepower to weight ratio I could fit without a shoehorn.  I chose a 1988 Chevy 4.3 roller motor, rebuilt and bored 020. over. With a Quadrajet 4bbl, 65,000 volt HEI for serious spark, and 3/8 flange Sanderson headers, plus a 110 amp hi-output GM 1 wire alternator, this motor is STRONG and RELIABLE.!!!!!   Thats also why  I used a GM SM465 (super low first gear AND fully synchronised!!)                               a  great unit used in 1 Ton trucks thru-out the 1980s
4 speed truck trans, complete with GM hydraulic clutch set up–no binding,ever!!    Its connected  via a NOVAK adapter tgo the all metal,all gear driven 1971 model 18 trandfer case. this unit can be rebuilt with WAY Low gears and is twin sticked and interlock pellet altered to provide 2 WHEEL LOW.   GREAT on tight trails!!  The dual exhaust is fully welded .

The body tub is fiberglass, the nose all steel.  The windshield has been chopped 2 inches. Sunpro guages, removeable steering wheel , racing bucket seats.”

View all the info on eBay

 
To Top

1953 CJ-3B Manitou Beach, MI $3500

• CATEGORIES: CJ-3B • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Price bumped up to $3500.

(08/30/2012) This has a rare fiberglass CJ-3B Body.

“Hello I have a 1953 willys jeep. Runs and drives good. Good tires. real clean. fiberglass body. Would like to get $3500 obo. If you might be intersted please give me a call at517-240-6592.”

http://jxn.craigslist.org/cto/3314084681.html