Crawler Research Archives

To Top

1941 MB Slattie Sacramento, CA $8500

January 29, 2018 • CATEGORIES: MB • TAGS: , . This site contains affiliate links for which I may be compensated.
2

It’s propane powered. Lots of mods.

“Slat grille 41 Willys MB, super low serial number (under 3k). 22re got propane powered engine, Toyota 5 speed and t case with crawler gears. Toyota axles with 5.29 gears, Detroit front, e locker rear with cable. 4 link 1/4 elliptical rear end, leaf front, all on a custom boxed frame. Full soft top with doors, warn winch, 2 propane tanks, lots of extras. Runs and drives but needs the lights and winch wired up, could use a tune up as well. Tons of extras, CB, stereo rubicon rack, set of beadlock wheels. Trailer included, for the right price I’ll include an 89 F250 tow rig (11k for it all). 35in old style Goodyear muds, spare is a BFG km. Will consider trading for a small RV of equivalent value of possibly an old VW bus. Registered for the street with a 41 license plate. Currently in storage, serious buyers only.”

https://sacramento.craigslist.org/cto/d/41-willys-mb-crawler-propane/6475090353.html

1941-mb-slat-crawler-sac-cal0 1941-mb-slat-crawler-sac-cal1 1941-mb-slat-crawler-sac-cal2

Fb-Button
 
To Top

1949 Stretched CJ-3A Western CO $15,000

December 2, 2017 • CATEGORIES: CJ-3A • TAGS: . This site contains affiliate links for which I may be compensated.
0

Could be a fun rig.

“Ground up build has vortec 350 700r4 hybrid Dana transfer case 4.0 1 gears. Toyota Land Cruiser axles full float rear 4:56 gears Detroit lockers front and rear long field 30 spline inners. 37 inch tires. Alcan springs bilstein shocks. Wheelbase is 104. Body stretched behind door and front clip extended. Only thing original is windshield frame and grill.”

https://westslope.craigslist.org/cto/d/49-willys-rock-crawler/6404118005.html

1949-cj3a-flattie-crawler-co2 1949-cj3a-flattie-crawler-co3 1949-cj3a-flattie-crawler-co4

Fb-Button
 
To Top

1947 CJ-2A Davenport, FL $6500

November 1, 2017 • CATEGORIES: CJ-2A • TAGS: , , . This site contains affiliate links for which I may be compensated.
0

Lots of updates here.

“1947 jeep wills for sale. 4.3 liter Chevy v-6 mated to an small manual transmission and the stock Dana 18 transfer case with the tera low kit and has been cryo dipped. Dana 44 front shortened 5 inches by Dutchman axles. Chrysler 9.25 rear shortened 5 inches to offset differential. Spring over in back with yj springs and tj coil springs up front. Spooled rear with locking hubs in front. 8k winch up front that’s never been used. Fuel cell and battery are in back. Copperhead fab beadlocks. Body was brand new a few years ago. Full hydraulic steering.”

https://lakeland.craigslist.org/cto/d/1947-jeep-willys-cj-2a/6364477655.html

1947-cj2a-crawler-lakeland-fl1 1947-cj2a-crawler-lakeland-fl2 1947-cj2a-crawler-lakeland-fl3

Fb-Button
 
To Top

1946 CJ-2A Crawler Friendship, WI $15,000

October 1, 2017 • CATEGORIES: CJ-2A • TAGS: . This site contains affiliate links for which I may be compensated.
0

I doubt there is much left of the CJ-2A here. Maybe the grille?

1946-cj2a-crawler-friendship-wi

“I’m currently working on a hand built Rubicon style rock buggy that started life as a 1946 Willys flatfender Jeep. I’m still tinkering and working on it when time allows, but I’m willing to let it go if someone wants to make a decent offer. This project is still a long way from being finished but the chassis is fully welded, suspension is complete minus shock mounts, drivetrain is positioned, engine accessories in place, radiator mount mostly finished, etc. A lot of tube work, body work, all the small details, and finishing work are still needed.
Continue reading →

Fb-Button
 
To Top

JP Magazine’s Wicked Willys on eBay

July 8, 2017 • CATEGORIES: Features, Willys Trucks • TAGS: , . This site contains affiliate links for which I may be compensated.
1

Lots of great details about the build included within the description.

View all the information on eBay

1949-truck-jpmagazine-wicked-willys1 1949-truck-jpmagazine-wicked-willys2 1949-truck-jpmagazine-wicked-willys3 1949-truck-jpmagazine-wicked-willys4

” This is an Arizona titled (clean and clear) 1949 Willys Pickup built on a stretched 1997 Jeep Wrangler frame with a three-link front, 4-link rear, one-ton axles, manual transmission, 505 cubic inch Dodge/Chrysler RB Big Block engine. There are many many details that went into this build and I will try to list them here, but may miss some or forget some. Any really interested parties need to come see this truck first hand and ask questions. I reserve the right to cancel the auction any time in case of local sale, or if I decide to keep the truck. The truck drives great on-road and is extremely capable off-road. It has plenty of power, and turns heads everywhere it goes. Everyone loves it from Rednecks, to Hippies, and everyone in between.

Built as a Jp Magazine project Vehicle there are 8 or 9 3-4 page articles on the build. To see them Google: “Jp Magazine Wicked Willys”
You can also Google “Wicked Willys Ultimate Adventure” for more info on the truck and the UA trip

The truck, since I finished it in june of last year, has been on Petersen’s 4-Wheel & Off-Road Ultimate Adventure for 2016 (that included about 2000 miles of on road and trail driving) Over the Rubicon, Isham trail near Trona, CA, and part of Fordyce. Its also been on a few trails in AZ and all over Moab during Easter Jeep Safari 2017. It drives over almost anything the driver aims it at and is very stable off-road. I’d love to keep it, but I like to build 4x4s and can’t keep them all.
Continue reading →

Fb-Button
 
To Top

1943 Crawler Nampa, ID **SOLD**

October 23, 2016 • CATEGORIES: News • TAGS: . This site contains affiliate links for which I may be compensated.
5

UPDATE: **SOLD** Was $7500.

Could be worth a look if you need a crawler.

“First: NO, I WILL NOT ACCEPT PAYPAL
To actual buyers: 39.5 irok tires, twin stick transfer case, 4 link suspension in rear spring in front, locked front and rear, warn locking hubs on the front, fox air shocks in rear, limiting straps. The passanger strap is partially broken, but the waist strap works. Running, no issues, street legal. We’ve owned it a year but need to sell now that we’re down to a single income”

1943-mb-crawler-nampa-id2 1943-mb-crawler-nampa-id3 1943-mb-crawler-nampa-id4 1943-mb-crawler-nampa-id5

Fb-Button
 
To Top

1947 CJ-2A Crawler Inland Empire, CA **SOLD**

June 18, 2016 • CATEGORIES: CJ-2A • TAGS: . This site contains affiliate links for which I may be compensated.
2

UPDATE: **SOLD** Was $8800.

It isn’t currently registered.

“For sale, 1 of a kind Willy’s rock crawler. Stretched body, custom box tube frame, full cage built out of dom. Chevy 350 motor runs great, new th350 trans and np205 tcase. Sway away 2.5×14″ dual rate coil overs, hybrid Cherokee/ wrangler rear leaf pack. 16 gallon fuel cell, autometer gauges, 4:88 gears and locker in back. All parts on this are new and only seen one trip to the desert. Moving out of state and can’t take it with me. Never got around to registering it but I do have a vin tag for it. ”

1947-cj2a-crawler-inlandempire-ca

1947-cj2a-crawler-inlandempire-ca3 1947-cj2a-crawler-inlandempire-ca2

Fb-Button
 
To Top

1947 CJ-2A/Crawler Hillsboro, OR $2100

May 5, 2016 • CATEGORIES: CJ-3A • TAGS: , . This site contains affiliate links for which I may be compensated.
0

UPDATE: Still Available.

(07/29/2015) It looks like there’s potential here.

“I have a willys jeep project for sale. 102″ wheel base tub stretched 4″ in doorway. Frame is fully boxed with no cracks. It is running and complete now but I will be pulling the running gear and some other stuff for another jeep project I am working on. It is currently set up with dana 60 front 3 link with panhard. The rear is 4 link. Has j 20 steering box. Current engine is a 5.3 chevy trans is a th350 with a dana 300 transfercase. It has a great custom cage front tube work and rock sliders. Just use a 70s or or 80 chevy truck as a donor and it could be back running in no time. It could be easily pun on another frame if all you want is a light body for your crawler. Could also easily convert back to leaf springs if you want it more stockish. Body is in great shape I even have all the pieces that are cut off the back wheel well if you won’t them. Great project easy to finish lots of options all wiring works great turn signals wipers heater electric fan wiring. call with questions”

http://portland.craigslist.org/wsc/pts/5530463088.html

1947-cj2a-crawler-hillsboro-or2 1947-cj2a-crawler-hillsboro-or3 1947-cj2a-crawler-hillsboro-or4

Fb-Button
 
To Top

1942? Crawler Kuna, ID $6000

November 20, 2015 • CATEGORIES: CJ-3A • TAGS: . This site contains affiliate links for which I may be compensated.
0

Seems like a good price.

“1942 Willys crawler. Chevy 350, T18 transmission, Dana 20 transfer case with Terra Low Gear set, Dana 60 front axle with spool, and PSC full hydraulic steering, Rear ford 9″, nodular 3rd member, spool, 40 spline axles hardened axles, 4.56 gears front and rear, bead locks with 38.5″ x 14.50 x 15 Super Swamper TSL tires. Warn 8274 front winch, LED under carriage lighting. Runs great, crawls anything, full cage tied to the frame. Hate to sell but need something with more seating, titled and registered….Sell or Trade, trade must be pontoon boat or 4×4 with 5 seats or able to fit 5 seats, K5 Blazer, 5 seat CJ-5/CJ-7, Landcruiser, modified solid axle chevy Crew cabs, suburbans etc. Let me know what you have. Asking 6000 OBO or comparable trade.”

http://boise.craigslist.org/cto/5320394720.html

year-crawler-boise-id year-crawler-boise-id3 year-crawler-boise-id2

Fb-Button
 
To Top

1942 MB/Crawler Fair Oaks, CA **SOLD**

July 10, 2015 • CATEGORIES: MB • TAGS: , . This site contains affiliate links for which I may be compensated.
7

UPDATE:  **SOLD** Was $15,000

(12/07/2014) LOTS of updates.

1942-mb-crawler-fairoaks-ca1

1942-mb-crawler-fairoaks-ca2 1942-mb-crawler-fairoaks-ca3 1942-mb-crawler-fairoaks-ca4

“1942 Willys-Overland – $22,000
Plain and Simple: You will not find one as clean and mechanically sound as this one. 50 caliber gun mount still there. Fully street legal and fully tagged, ready for anything you want to throw at it. Customized for Off Road, however drives great on road. Virtually every mechanical part is brand new. I have invested approximately $30,000 of which I have all the receipts for. Work was either professionally performed or brand new mechanical parts meticulously installed with new gaskets and proper torque settings. Looks great in pictures and even better in person. I am selling because I don’t have the time to use it and it is taking up needed space in garage. Stored in garage every day since ownership. It has been on the Rubicon Trail 3 times with ease, never sustaining any damage, getting stuck, or need for winch. Below is a sample of the upgrades/mods that were performed:

Continue reading →

Fb-Button