UPDATE: **SOLD** Was $7500.

Lots of updates to this crawler.

“1948 Willys CJ2A flat fender. it has a 1992 chev TBI injection 350, sm 4 speed with granny low. 205 transfer case. 529 gears with detroit lockers, custom Alcan springs, bilstein shocks, cross over steering/ Hi steer. Warn upright winch,complete roll cage tied to the frame,it sits on 37″ toyo’s could be easily street able if you changed out the tires, I built this willys just to go play so I just put it on a trailer . Corbeau suspension seats with harness. The body is all steel original 1948 thats not beat up. there is just way to much to list this thing is ready for the trails.”

UPDATE: **SOLD** Was $6000.

This has some changes.

“FOR SALE:
1948 CJ-2 this is a built rockcrawler
AMC 401
Dana 44s both ends
auto transmission
35″ Boggers
Have put some time into this rig but don’t have the time anymore and too many other projects. I have put baja seats, new dash with gauges, new fuel cell. The only thing left is to wire up the new gauges replace the battery and a tune up wouldn’t be a bad idea.”

UPDATE:  Price dropped to $2850

(03/07/2011) This has a variety of mods.  I’m unsure of the transfercase setup (someone recognize that?).  I have to say I’m a little surprised this runs the early C shackles.

“FOR SALE: A 1948 jeep willys mudder. This was built strictly for the mud. Has a small block chevy with a power glide tranny. The guy I bought it from says it has a full size blazer running gears. You won’t see one like this one! Smokes when first started up. Rough as hell, cool as hell! Call 618-473-3208 or 618-402-9717 for more info or pic’s.”

http://stlouis.craigslist.org/cto/2314475954.html

Continue reading →

UPDATE:  Price dropped to $2000

(09/21/2011) “1952 willys jeep 1 ton project. jeep has dana 60 front with 4:56 gears ,eaton rear with detroit locker and 4:56 gears. four link rear end ,T18 tranny ,dana 20 T case, set up for small block ford. full roll cage ,aluminum dash with full autometer gauges, racing buckets, five point harnesses, wheels are military beadlock with run flats and 36 inch wranglers. project needs finished. have many parts that go with. 2500 OBO will not part out”

http://desmoines.craigslist.org/cto/2275909309.html

UPDATE:  **SOLD** Was $3000.

(11/14/20100 This is aptly called “Widow Maker”

“48 willys with a 350 manual four speed lifted custom roll bar 5 gallon fuel cell crow bucket seats diamond plate all the way around”

UPDATE:  **SOLD** Was $8000

(06/30/2010) Here’s a crawler.

“47 cj2a based rock crawler v8, auto, locked, new tires, hydro steer assist, runs on propane. plus lots of new parts!!!!!!!!! installed befoure easter. we are looking for a cummins truck, or a 4 seat sand rail, or mini rail”

UPDATE:  Price dropped to $4300.

(11/22/2009) “It’s a 1953 CJ3A with a Buick 225 v6 a sm420 transmission with granny gears, Dana 18 t-case; full float Dana 44 rear end with a Detroit locker 5.29 ring and pinion. The front end is a Dana 30 with a lock right locker and 5.29 ring and pinion. Warn winch 9,500, (5) 35×12.5×15 BFG Mud terrains (practically new)(one on rear rack), plasitc fuel cell, air compressor, welder under the hood, tool box in the back, … Call Colin at 530-885-6556 ” http://s1208.photobucket.com/albums/cc362/callardgreens/

http://sacramento.craigslist.org/cto/2234919972.html

UPDATE:  Price dropped to $2500

(11/15/2010) This fiberglass bodied crawler is still a project, but lots of work has been done.

“1947 CJ2A willys jeep rock crawler project. I will trade for good samurai or drivable jeep. I have lots of time into this project and still needs finished. Fiberglass body streched 5″ for leg room. Boxed in frame. Trangulated four link. Needs finish welding wich i can do if needed. Dana 60 rear/ 44 front. 39″ swampers not much tread mainly for mock up and test run. Custom roll cage made from 1.75″ DOM tubing. Custom rock sliders. 100″ wheel base. NO MOTOR OR TRANSFERCASE. Have turbo 350 trans if interested. Will take no less than $2500 CASH Call James 253-312-8796”

http://seattle.craigslist.org/tac/cto/2089182780.html

UPDATE: **SOLD** Was $2000

“1953 CJ3-A Willy’s Jeep. 42″ swampers, Rebuilt 400 Dodge big block, 727 auto tranny, 203 tranfercase. 90% done needs some work, but runs and drives. $2000”

UPDATE: **SOLD** Was $1600

“1948 Willy’s CJ-2A project for sale with original title. $1,600.00 OBO. Custom 2x4x120 wall frame. 2”x120 DOM 6 point roll cage w/ UHMW roof. 1.5”120 DOM engine, winch protection and rock sliders. I still original hood and fenders. I also have a custom aluminum hood built to fit a Chevy 350 engine. The body and chassis comes with a 15 gallon fuel cell holly blue fuel pump, American auto wire harness, steering column, Toyota brake booster and 1 ton gm master cylinder, 2 RCI seat including covers, front leaf springs for a V8 application, 4” TJ coils for the rear and 18” bilstien shocks. A set of 39.5x15x15 TSL super swampers mounted on 12x10x15 rock crawler steel wheels 8on 6.5 Can be added for $700.00 ”

UPDATE: **SOLD** Was $7800

It looks like there has been extensive work done.

“1948 Rock crawler, 350 chevy engine, Dana 44 axles, Detroit lockers, 39.5×15.50-15 swampers on 10×15 American Racing Beadlocks. 15 gallon fuel cell, 4 wheel coil springs, Rancho RS 5000 shocks, Must see to really get the feel! $7800”

It’s certainly one of a kind.

“1946 willys rockcrawler!!!! YOU CANNOT DRIVE THIS CAR ON THE STREET!!! strictly a trailer truck for the woods!!! 390 big block and 36 military oz tires…. barely used carb and coil setup…. Please no trades and no offers.”

http://seattle.craigslist.org/tac/cto/1835983092.html

UPDATE: **SOLD** Was $800

Here’s a project!

“cj2a it has been stretched 12″. its on a tube chassis, full width 3/4 ton axles. dana 44 front and a full float 14 bolt rear, 4″ lifted springs, 8 point roll cage. all it needs is an engine and tranny. it is set up for a 350/350 with either a 203 or 205 t-case. has full canvas top with doors. 800 OBO”

UPDATE:  **SOLD** Was  $1500.  Is that a stainless grille?

(06/06/2010) This looks like it has some value. Still plenty of work left.

“1952 Willy Rock Crawler Project. Has great start, I have way more in it than this. New 33″ x 12.50 x 15 Trexxus tires on Aluminum modular wheels. Has 1993 Chevrolet 4.3 liter V6 needs the wiring finished. Has Racing Seats, fuel cell, Centerforce clutch, hydrolic clutch setup. $1500.00.”