UPDATE: **SOLD** Was $1200.

It’s a project.

“1946 Willys CJ2A Project
Small block Chevy engine
Really nice frame and engine conversion
Tub is nice with minimal rust -hat channels are rusted
Fair set of fenders
No hood, grill , or windshield
Has vin tag no title”

UPDATE: **SOLD** Was $4000.

Two prices, $4000 and $4300, are listed. It’s a project.

“Old rare Willys for sale.
Great project that I just don’t have the funds for any longer.
Not too much rust. Runs with original engine or I have a crated up engine that comes with it. The carburetor needs to be rebuilt and the left rear wheel is locked up for some reason. Fuel tank was recently cleaned and sealed. New battery.”

UPDATE: **Status Unknown** Was $6250. 

(02/13/2017)

“Final Price reduction! 6250. Swap meet weekend special. 1951 CJ3A V8 Rockcrawler. Turn-key wheeler.

Additional photos and description available at request, please call. 541.77I.8o88 -Jake

v8 engine is a ’97 Fuel injected 5.0 Ford. Automatic transmission is a modified C4 Ford 3 speed, manual valve body, trans-go Stage III shift kit with additional friction discs with a high capacity aluminum pan. Advanced adapters tailshaft housing and output shaft to a twin stick Dana 20 transfercase with model 18 gearset, 1.25″ intermediate shaft with 2.46:1 low range

Front custom axle is a Dana 44 high pinion Full Spool with 5.13:1 gear ratio. Rear axle is Ford 9″ large bearing, also Spooled with 5.13:1 gears.

Suspension in rear is a custom 4-link, front is leaf sprung with YJ leafs. Suspension flex and control is excellent, no wheel-hop and predictable chassis roll. Flex steer is minimized by 4-link geometry.

Full hydraulic steering, 15×10 steel wheels and 37″x13” boggers. Custom 6 point roll cage works well at keeping the windshield frame safe in trees and rocks, roll cage also works as a 7 gallon air tank for on-board air. 20 gallon custom aluminum fuel tank for all-day wheeling without carrying additional cans.
New red top Optima battery replaced last year, Warn 9500TI winch is NOT INCLUDED in sale price but is negotiable.“

It’s an interesting build.

“1948 Willy for trade for side by side, Toyota 4×4 or older chevy 4×4.
Jeep has Buick v6 231, sm420 4speed Dana 18 tcase, arb air locker in front, 33×12.50r15 on off set wheels. Very low gears. Chevy tilt wheel.
Let me know what you have.”

https://chico.craigslist.org/cto/d/1948-willys-for-trade/6298760778.html

Appears to have a replacement body.

“Custom off road wheels and tires, Ramsey winch, roll bar, custom bumpers, tow bar, hard top, and other extras”

https://sandiego.craigslist.org/nsd/cto/d/willy-jeep/6274559549.html

Has some updates.

“1952 willys cj3a boxed frame, shackle reverse in the front, Dana 20 transfer, tilt steering, Buick v-6 runs, nice top, custom tire carrier, 37″toyos, power steering,”

https://portland.craigslist.org/clk/cto/d/1952-willys-cj3a/6295807206.html

Mike share this ad.

“1947 willys jeep
condition: good
fuel: gasodometer: 50000
title status: clean
transmission: manual

Runs and drives! Decent not mint condition. Has rear pto for a winch, I have the winch but it is incomplete. This thing is stupid fun. Has title”

https://newjersey.craigslist.org/cto/6299322634.html

Runs, has f-head.

“48 Willys jeep 4 cylinder, 4×4 works, good tires, could use carb work. More info call cliff”

https://missoula.craigslist.org/cto/d/1948-willys-jeep/6291951370.html

UPDATE: **SOLD** Was $2000.

Mike spotted this one. It appears to have a repro body with the M-38 indents and MB glovebox.

“1952 Jeep Willys CJ3A flatfender with a CJ2A style M38 body tub. Jeep has very little rot for the year and is about 80% complete. It will run and drive with a little work. 134 cubic inch “L head” flathead 4 cylinder with T90 3 speed transmission, Dana 18 twin stick transfer case. Brakes were rebuilt and has a small lift kit installed. It is currently on tube-type 7.50-16 bias ply traction plus tires on stock style steel wheels. Has 3A windshield and frame with 3A grille. Marker lights converted to dual filament bulbs for directional kit and I have a Stat-900 series column switch. Has been converted to 12 volt with GM Delco 10-SI alternator but it really should be re-wired with the correct style harness. Has aftermarket period correct rollbar and an aluminum hard top and doors that can be restored or just painted and left as-is. Jeep needs new body mount kit and rear bumper, and steering box to be rebuilt with new bearings and seals. Will need finish assembly. I have a spare 2A dashboard and cowl panel to use for patch pieces to put the dash back to original. Has Warn Dual-Matic lockout hub assemblies on the front axle. $2,000 takes it home. No title issued in NY state before 1973 but has a NY transferable registration from a previous owner. I never personally registered this vehicle. Excellent trail rig or beach buggy.”

Has some mods.

“1948 jeep willys will start run and drive but needs brake work done. Has working PTO drive, shifts through all gears hi and low. Call for more details, i have alot of extra parts, extra running motor and trans, rims, windshield, radiator,starter. Also have title.”

https://sanantonio.craigslist.org/cto/d/jeep-willys/6297682951.html