More random jeep pics from Charles.
1947 Wagon Blue Ridge, GA **SOLD**
UPDATE: **SOLD** Was $10,900.
Nice looking wagon refurb.
“1947 Willys Overland Wagon. 350 Chevy engine. Automatic transmission. Complete rebuild from the bottom up. Photo album of the complete rebuild.”
1958 CJ-5 Maine **SOLD**
UPDATE: **SOLD** Was $3500.
Looks promising.
“This is an all original, unrestored Jeep with 30,923 showing on the odometer. Taken off the road and unregistered since 1974, stored in a barn and used around a farm/camp since then. The odometer stopped working after the first few years of farm use, have evidence of 28,782 miles on 8/24/1972. Engine runs great, starts right up, new tires, recent exhaust, excellent brakes, drives great, 4WD works as it should. Has the cabin heater option. Comes with the original canvas top with bows, two sets of doors, an extra set of bows for a bikini top, spare tire and original manuals. The top needs some re-sewing of the seams. Some rust in the usual places. Need some minor repairs to be roadworthy, mostly electrical.”
1948 CJ-2A Garden City, KS **SOLD**
UPDATE: **SOLD** Was $6000.
Has a later model oil bracket, so there may have been some engine work at some point (or the original bracket broke).
“hello, i have for sale a 1948 willys model cj2a jeep,has the go-devil 4 cyl. gas engine, 3spd manual transmission, twin-stick transfer 4-wheel drive. has 79,935 miles original best that i can tell. olive green paint with white painted wheels. brake shoes,wheel cylinders and rubber brake lines,and master cylinder have been replaced. complete tune-up, 6volt system, but have a 8 volt battery in the jeep. it starts easier. seats are good shape. inside of tub is great shape. tires are weather cracked but still do the job. have sears vinyl top and new spare tire that goes with it. jeep is real good shape for its age. runs and drives good. thanks.”
1947 CJ-2A Davenport, FL $6500
Lots of updates here.
“1947 jeep wills for sale. 4.3 liter Chevy v-6 mated to an small manual transmission and the stock Dana 18 transfer case with the tera low kit and has been cryo dipped. Dana 44 front shortened 5 inches by Dutchman axles. Chrysler 9.25 rear shortened 5 inches to offset differential. Spring over in back with yj springs and tj coil springs up front. Spooled rear with locking hubs in front. 8k winch up front that’s never been used. Fuel cell and battery are in back. Copperhead fab beadlocks. Body was brand new a few years ago. Full hydraulic steering.”
https://lakeland.craigslist.org/cto/d/1947-jeep-willys-cj-2a/6364477655.html
1946 CJ-2A Portland, ME $7200
This includes a custom wood top.
“I have a fully restored (frame off restoration) 1946 Willy’s Jeep CJ-2A. Bright red in color, comes with the original 134 flat head 4 cylinder motor. T-90 transmission in it as well with the uncommon 3 speed column shift. Jeep has been converted over to a 12 volt system. Hand made custom top along with many new parts. Came from out west not exposed to snow. Asking 7,200.00 or best reasonable offer,”
https://maine.craigslist.org/cto/d/1946-willys-jeep-cj-2a/6366155359.html
1974 CJ-6 Huntsville, AL **SOLD**
UPDATE: **SOLD** WAS $8000.
Has a Meyer half-cab.
“FS/FT. 1974 Jeep CJ6. This is my daily driver. The speedometer and odometer are not working, so I do not know the actual mileage.
Within the last 18 months, I have completed the following work:
– upgraded from points to electronic ignition
– rebuilt the carburetor
– replaced all wheel bearings and seals
– all new belts and hoses
– upgraded headlights with a relay wiring upgrade
– rebuilt brakes including all four wheel cylinders
– new tach, oil pressure and temp gauges
– lots of other work done, any questions just ask.”
https://huntsville.craigslist.org/cto/d/1974-jeep-cj6/6366718243.html
1952 M-38A1 Brush Jeep Hilton Head, SC $13,900
UPDATE: Still Available.
(10/05/2017) Ted spotted this nice looking Fire Pumper Brush jeep on Hemmings.
https://www.hemmings.com/classifieds/cars-for-sale/jeep/cj5/1820774.html
“1952 Willys Jeep/ M38A1 (former Military/early CJ) converted to Brush Fire pumper somewhere along the way. I don’t have much history on this vehicle. But, Drives great, pump disconnected for now, but does work. New Paint 2 years ago. (NOTE; PHOTOS SHOW FORMER UPPER HOSE TRAY, HOSE REEL AND TANK WHICH HAVE BEEN REMOVED AND SCRAPPED, REPLACED WITH SECOND SEAT IN REAR WITH MATCHING FRONT SEAT UPHOLSTERY) Now a GREAT truck for parades with the family, cruising the beach, hills, or wherever. Fits in any garage!
CJ-5/M-38A1 Floor Pan Bella Vista, AR $750
Galen’s looking to sell this pan.
“For Sale & Offering FREE DELIVERY in the Northwest Arkansas/Southwest Missouri/Northeast Oklahoma area!
$750 OBO
New Omix-ADA 12007.04 Replacement Front Floor Panel with removable Transmission center cover.
Fits 1952-1971 M38A1, 1955-1969 CJ5, 1955-1969 CJ6 (does not fit 1970-1975 CJ5 Rear Gas Fill Tubs)”
https://fayar.craigslist.org/pts/d/jeep-replacement-floor-pan/6368202514.html
1949 CJ-3A Locust Grove, GA $2200
Runs, needs brakes (and other parts).
“1949 Willys Jeep CJ2A
Engine Runs. New fuel pump and fuel tank
Original Drivetrain
Windshield is missing and it does not have functioning brakes”
https://atlanta.craigslist.org/sat/cto/d/1949-willys-cj-2a/6362061324.html
1952 M-38 Chugiak, AK $3400
Looks like this has the external heater on it. It doesn’t run.
“952 M38 Willys Jeep with top – no title but comes with Bill of sale. $3400 – all there except gas tank; doesn’t run & head is removed (but present).”
https://anchorage.craigslist.org/cto/d/1952-m38-willys-jeep/6356525888.html
CJ-2A Tub St. Louis, MO $200
Maybe someone can use?
“$200.00 obo for rat rod or ? has rust to clean up. Tub only.”
https://stlouis.craigslist.org/pts/d/1948-jeep-tub-for-rat-rod/6362575942.html
1961 CJ-5 Southern NJ $2500
No pics provided.
“1961 CJ5 Willy’s Jeep. 4 wheel drive. Manual transmission. Plow. Has 1951 Willy’s motor with 35,000 miles on it. Ran when parked a few years ago, shouldn’t take much to get it running again. Clean NJ title. $2500 cash.”
https://southjersey.craigslist.org/cto/d/61-willys-jeep-4×4-plow/6360391478.html
1942 MB Body Anderson, SC **SOLD**
UPDATE: **SOLD** Was No Price.
Appears to have some rust.
“1942 Willys Jeep body. Includes tub, window frame, fenders and hood. I was going to use it for a project but decided to go another direction”
1960 CJ-5 Hampton, NH $2500
UPDATE: Still Available.
(09/18/2017) Has a fiberglass body and runs.
“I purchased this a year ago with the hopes to fix it up but I realized that I dont have the time or space for it. That being said I did a little work to it. Replaced battery and battery cables. Replaced the carb and replaced the fuel filters. I also purchased a new gas can for it.
The body of the vehicle is in great shape. The body has been replaced with a fiber glass one. The inside is also in great shape no rips in the seats.
The frame is also in great shape. There is rust but NO ROT. A previous owner cut a notch in the frame for some reason but it doesn’t seem big enough to effect anything.
The jeep starts and runs but is very loud and blows a blue smoke. I have been told that it has a rod nock. I am asking $2500 OBO. Some research tells me to get the engine running reliably it will be about $2500. You could have a cool jeep for 5k. Only serious inquiries please. I can send more pictures if needed. “
https://nh.craigslist.org/cto/d/1960-weep-willys-cj5/6365410767.html
1942 Photo of Jeep, Dawson Creek, BC on eBay
I can say the place looks a little nicer than it did back in ’42.
“1942 Press Photo Army Jeep passes the Dawson Creek muddy street.
This is an original press photo. Dawson Creek, BC. There are fewer spots these days than Dawson Creek BC. U.S. Army Troops and engineers are gathered there to lay out preliminary plans for building the highway to Alaska. Rain and mud are a set back but Army engineers say they will push her through”. An Army jeep is shown on the muddy main street of Dawson Creek. Photo measures 9 x 7.25 inches. Photo is dated 3-15-1942.”
1953 CJ-3A Fowlerville, MI $7,799
This CJ-3A has a CJ-7 hardtop reshaped to fit a CJ-3A. It looks well done. The doors are well don’t, too. Thanks to Gary for spotting it.
Bumper Weight Rochester Hills, MI $100
Doug spotted this one. Seller also has an FC-150 rear weight for sale, too.
“Cast Iron wieght that mounts to the front of a pre 1971 Jeep CJ. Adds 150 pounds to the front of the vehicle to enhance pulling traction. Rare factory special equipment. 100 OBO . This things heavy! will not ship. I also have a rear weight for a fc150.”
1945 MB White Bear, MN $17,500
Ted shared this one.
“Willys 1945 ¼ ton 4×4. Overland Motors Jeep Division Model MB. Serial #431784. Gross weight 3250. Delivery date 4-3-45. Not military tires, tube 616 4-ply. Frame-off restoration. All original. $22,600 into it, have receipts”
https://www.hemmings.com/classifieds/cars-for-sale/willys/mb/2024731.html?refer=news
1947 CJ-2A w/Tow Boom Ham Lake, MN **SOLD**
UPDATE: **SOLD** Was $6950.
(10/12/2017) This one is cool!
“1947 CJ2A Jeep, Original L4 engine runs great. Brakes, transmission, transfer case all gone thru. Floor pans and fender replaced, Many other items replaced or repaired. Includes a MU2A Braden winch rebuilt w/towing boom driven by pto on rear of Jeep. Jeep
also has rare heater. This would be great for lake cabins to aid in boat dock removal, farm use, great fun to drive. Ready to sell. $6950”
1953 CJ-3B Sturgeon Bay, WI **SOLD**
UPDATE: **SOLD** Was $2700.
The body’s had some work done to it.
“1953 CJ3B Willys unfinished project
4 cylinder overhead cam F – Head engine has less than 10 hours run time since complete rebuild by local engine shop. Fully functioning 4WD high and low range. Jeep runs and drives very good. Jeep has original steel grill, hood, firewall, dash, windshield and tailgate. The main body tub was custom built out of 1/8” steel plate(see photos). This thing will not rust out any time soon. Starter and ignition systems have all new wiring. Also included is an Allstate brand aluminum hard top with doors that was originally available for Willy’s from Sears. Except for steel body tub and bucket seats, Jeep has not been modified – all OEM driveline, 6 – volt system, brake system, original gauges, etc.
CASH ONLY – ABSOLUTELY NO TRADES – DON’T ASK
Continue reading
1946 CJ-2A Onalaska, MN $10,200
UPDATE: Still Available.
(10/12/2107) Includes some custom woodwork.
“Bumper to bumper this vehicle is new! This was a great winter project now it has to go, I am moving and out of room…Everything is either new or rebuilt..”Go Devil” 4 cylinder complete overhaul, radiator, brake drums,shoes and lines, shocks, tires, starter, wire harness, exhaust system, signal lights, seats, steering wheel, gas tank, gauges, seat belts, custom oak rails, interior panels and rear wood seats.The list goes on! I have the build sheets for part”
https://minneapolis.craigslist.org/dak/cto/d/1946-cj-2a-willys/6361650578.html
1946 VEC CJ-2A Sparta, MI **SOLD**
UPDATE: **SOLD** Was $1200.
It’s a got tool indents.
“1946 Willys CJ2A. This is an early 2A with the tool indentations still on the drivers side. This one would have been a column shift. It has everything except for drivetrain and seats. I bought this willys with a Chevy 153 in it and drove great so I know the axles and all that are good. I was going to put a small block chevy into it but never got around it. The body has been repaired in a number of spots. Most of the floor is new steel. This would be a great offroad wheeling project for the winter.”
CJ-2A Parts Spokane, WA
Various parts (variety of pics on Craigslist ad).
https://spokane.craigslist.org/pts/d/many-willys-cj2a-parts/6366475976.html
“I have a few Jeep parts from my collection that I’ve decided to sell. I’d keep them, but I don’t have enough space to store everything and I need cash to finish my shop. I’ll do my best to keep the list current, and I may add more as well. Take your pick:
Original Early CJ2A Windsheild: $400 – in good shape with inner frame. Inner frame is rusted out in a few spots but the outer frame is solid.
Reproduction Tailgate (no stamping): $150 – almost like new, paint is faded
Early CJ2A Body & Front Clip – 1946: $500 – floor pans are gone, covered with flat plate. Underside in general is rough. Has a few holes cut in it, needs a good restoration. Hood and grill are fairly straight, fenders need some repairs around the supports.
Dana 27 & 41 axles: $300 a pair
Frame and Springs: $300 – from a 1947 CJ 2A. It’s pretty rough, bubba welding all over the front end, but nothing a competent welder cant fix. Looks like it had a plow put on it at some point. Coated in a dull red finish that has protected it from rust over the years. Rear half is fairly solid with the stock draw bar. Axles sold separately. No Title.
Chrome Wheels: $100 – Set of 4, 5 on 5.5 pattern with large opening for the big early CJ hubs. There is surface rust, and the tires died 30 years ago (but the tubes hold air!). No bent rims. 1 hubcap.
CJ 5 Rollcage: $150 – Front half is bolted on, the roll bar would work on early CJs as well.
Carburetors: $75 each. I have a Carter and 2 Solex’s.
Fuel, Water, & Oil Pumps $25 each.
Oil Filter Brackets $25 each.”
1943? CJ-3A? Alpena, MI $3750
No pics provided. It was listed as a 1943.
“All original Jeep cj3a. Transmission complete rebuilt. Transmission need to be installed. Only a few parts need to put on the road. Titled as 1943. Ran when transmission was removed. Painted as a military model.”