emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
UPDATE: **SOLD** Was $750.
Appears in good shape.
“M38A1 Jeep Body. Approximately 1953-1955. Tub with front fenders, grille, and hood. Also includes floor parts Mand most of the wiring harness. Small amount of rust on the body, generally in good condition. $750.00 cash only”
Craig shared this ad. Looks like there is value here.
“1965 jeep Tuxcedo mark1v very rare needs starter repair and possibly carb kit”
https://plattsburgh.craigslist.org/cto/d/1965-jeep-tuxcedo-mark1v/6369403255.html
UPDATE: **SOLD** Was $4500.
It doesn’t run, but looks like it would make a good build.
“True Barn Find- DOES NOT RUN-283 Chevy-Engine 3 Speed Transmission-GREAT PROJECT”
UPDATE: **SOLD** Was $1800.
It’s a project.
“Project that will never get done
It is pretty much all there , comes with an extra frame from a CJ2A”
UPDATE: Price dropped to $4500.
(10/11/2017) This has a great vintage license plate.
“This is a project jeep, but it runs and drives so you can have fun with it while you work on it.
Needs rust repair, paint, transmission rebuilt, and everything else would enjoy attention. That said, it starts right up and drives fun. Has the original running gear (L134 flathead “go-devil” engine). Although generator has been swapped to an alternator. (12v system).
4wd works nice.
Comes with rare aluminum arctic top, with aluminum doors and accompanying windshield.”
https://boise.craigslist.org/cto/d/1947-cj2a-jeep-willys-and/6367428662.html
It’s a project with an updated drivetrain.
“46 Willys project AMC 360 4-speed transmission Toyota front and rear diff power disc brakes Aluminum Intake MSD distributor”
https://seattle.craigslist.org/tac/cto/d/willys/6367864749.html
UPDATE: Price dropped to $1200.
(07/24/2016) Could make a good base for a modified topless wagon (already missing the top).
“1948 Willys wagon. Was going to convert it into a truck. Lots of rust. Engine runs, but needs some work to make it road worthy. $1200 obo, or trade for car.”
https://slo.craigslist.org/cto/d/1948-willys-wagon/6368392944.html
The internet in Boise was terrible for some reason, so I was unable to complete updates. Updates tomorrow.
UPDATE: **SOLD** Was $3000.
Jim shared this one.
“Nice jeep all original.it was a true military jeep,will trade for cj or bronco”
I forgot to ask Gavin where he is located. Email him at: blackbike44@yahoo.com
“I have a 1957 I believe registered as a 1960 Jeep FC150. it is still a project not perfect by any means”
UPDATE: It appears this endeavor didn’t work out.
Merlin reported on a NEW CJ-5 that will go into production (approx 5,000 jeeps per year) soon. One question that many folks have asked is how the new jeep can meet the current safety specs for new cars. According to Merlin, the short answer is it can’t, but it doesn’t have to meet them. In 2014 the feds passed regulations that allow low production auto manufacturers to only have to meet the specs for 1967.
“With Sema going on I am excited to finally announce the return of an old favorite, the Cj5. Universal Motors Corp (makers of the Allied Jeep L head blocks) has the new Mopar licensed Cj5 on display in booth 32326 at Sema. These sport the current Jeep engine, and there will be a diesel option as well. Bodies and parts will be manufactured by UMC, not bought from current parts and panel manufacturers other than Jeep. A kit version will be available as well. Assembly is done in Detroit. More info and pics will be posted as I receive more. http://universalmotorscorp.com/”
I will be spending a few days in Salt Lake City (roughly Friday through Tuesday) to visit with my kids. So, updates might be a little spotty.
UPDATE: **SOLD** Was $9400.
Looks in good shape, but seller suggests it needs a little work.
“1946 Flat Fender, body off, ground-up restoration 15 years ago.
Restored to original. Everything new or rebuilt.
Everything works.
Less than 200 miles since restoration
Current reg & pink slip.
Must sell. Have receipts.
Converted to 12 volt/ Has turn signals, bucket seats, built-in battery tender.
No top; no wipers.
Needs just a little TLC.”
UPDATE: **SOLD** Was $10,000.
Has an updated engine.
“1966 CJ 6
Very clean. Garage kept. 100% rust free California Jeep. CJ6’s are roughly 20” longer than a CJ5.
-4×4 works great
-Chevy 4.3L V6 with a 4 barrel carb, headers and new quiet exhaust from the headers back. Starts right up with no issues what so ever; I daily drive it. Very fast and has great power. I also have part of a fuel injection kit.
-Smog Exempt
-New air filter and oil change 100 miles ago
-White paint and pin striping from 2009. Looks great but not perfect. Body is extremely straight with no major dents
-Drums on all 4 wheels. Stops well, no leaks.
-Factory manual steering, no power steering Continue reading
UPDATE: Still Available.
(09/19/2017) Runs, but needs some work.
“1954 Willys Jeep M 38A1 Brush Truck
runs
need brakes and a gas tank
12 volts”
https://frederick.craigslist.org/cto/d/1954-willys-jeep-m38a1-brush/6363924697.html
Looks to be a 2A that might have some MB parts. The seller is under the impression that an MB frame is a stronger frame.
https://sfbay.craigslist.org/eby/cto/d/rare-pre-caltrans-1948-willys/6363482236.html
“Starts right up, runs and drives!
I believe it may have been a Bureau of Highways (before caltrans) vehicle, hence it’s vintage Omaha orange color and enlarged marker flashers. It’s pink slip says CJ2a, but I’ve identified that it has a rare MB (side stamped) engine Willys go devil engine and an upgraded heavier duty MB frame too. The engine and frame look stock otherwise and are indistinguishable using the same parts, if you don’t these vehicle history.
Continue reading
This may have a replacement body. No description provided.
https://denver.craigslist.org/ctd/d/1950-willys-cj-3a/6369724609.html
Looks like a project.
“CJ2A trade for a 3/4 or 1 ton truck. I don’t have time for a project so truck must be running in its current state . Preferably a diesel. Preferably a Dodge. But will consider any 3/4 or 1 ton so let me see what you got.”
https://tulsa.craigslist.org/bar/d/willys-jeep/6357403438.html
UPDATE: **SOLD** Was $2900.
“NOT MUCH TO SAY. MY 82 YEAR OLD DAD’S OLD JEEP. HE’S HAD IT 20 YEARS? RECENTLY GONE THRU by a shop and REPLACED A BUNCH OF STUFF. RUNS AND WORKS GREAT. HE HARDLY EVER USED IT. ONE OF THOSE DEALS, HE HAD DREAMS OF JEEPING AROUND WITH HIS WIFE BUT THE WIFE DREAMS OF NOT JEEPING AROUND. CLEAN TITLE. HAS ORIGINAL 4 CYCLINDER, SWITCHED OVER TO 12 VOLT SYSTEM. GREAT MILAGE AT PUTTING AROUND SPEEDS, LIKE A GALLON AN HOUR”
That looks to be a Cab Enclosure hardtop, which means it requires the vertical windshield.
“CJ3B high hood project Buick v6 T90 3spd Dana 20 transfer case lot’s of parts hard top don’t fit but a good fabricator can make work”
https://kalispell.craigslist.org/pts/d/1953-willys-cj3b/6370010207.html
No pics provided.
“1952 Willys Stakebed with lots of extra parts. Runs good. V6 buick motor with original 4 wheel drive running gear”
https://mohave.craigslist.org/cto/d/1952-willys-stakebed/6370123640.html
Needs head gasket examined.
“For sale 1947 Jeep Willy. Bought it, it runs but after running it for awhile header gasket leaked. Have a new header gasket but never but on. It starts but would only run it for a short time. While transporting the windshield frame broke.”
https://charlestonwv.craigslist.org/cto/d/1947-jeep-willys/6361167913.html
UPDATE: **SOLD** Was $1000.
(09/13/2017) Craig shared this one. Seller is including a snow plow and front counter weight as well. Looks like a good price.
“1957 Jeep A Trench trencher,snow plow and front counter weight. Will sell all together or separately”
UPDATE: Price dropped to $2000.
(05/28/2017) “1958 Willy’s Jeep CJ-3B Navy Department issue. My Dad has owned this Willy’s since 1995 and used it on his property until 2010 and parked it. He never registered it and does not have a title. I does run but will need a new water pump (seized) and fuel pump. The carb. needs to be rebuilt. He has three original wheels. Engine number matches the Willy’s ID plate.”
https://inlandempire.craigslist.org/cto/d/1958-willys-jeep-cj-3b-navy/6337136396.html
UPDATE: **SOLD** Was $7000.
(09/27/2017) Powered by a 283.
“1948 CJ2A no rust perfect frame and body, 283 V8, the rest of the drive train is all original-T90 transmission, Dana 18 transfer case, front axle Dana 25 and rear axle Dana 41.
seat belts, a fire extinguisher, 12V outlet, new spare tire, Besttop Supertop, car cover, tow hook, hanging pedal kit, some extra parts like clutch linkage and u joints.
This Jeep is in great shape, no rust and always starts.
I have a roll bar that needs to be welded up that comes with it.”
