UPDATE: **SOLD** Was $10,000.
Looks solid.
“1952 m38 military jeep nice original old jeep never apart only painted one time lots of nos parts runs & drives good may trade”
UPDATE: **SOLD** Was $10,000.
Looks solid.
“1952 m38 military jeep nice original old jeep never apart only painted one time lots of nos parts runs & drives good may trade”
UPDATE: I was brain dead on this listing. It’s one that’s been for sale for a while, but was recently listed in Cle Elum. (Thanks for correcting me guys!)
https://seattle.craigslist.org/est/cto/d/1954-jeep-cj3b/6546744792.html
“Well preserved 54 hunting Jeep, all original low miles. Body is solid and runs good.”
UPDATE: Still Available.
(03/08/2018) Seller lists this as both a 1951 an a 1956.
https://medford.craigslist.org/cto/d/1956-willys-jeep/6518497654.html
“1956 Willys Jeep with 283 Engine – Has canopy and doors”
UPDATE: **SOLD** Was $1400.
May have some parts value.
“1964 jeep kaiser m151 mutt military for restore or parts body in rough shape. 4×4 . Independent front and rear suspension . motor . transmission . Tranfercase complete. Needs radiator. And wiring. Tons of spare parts all go with it. Bill of sale”
UPDATE: **SOLD** Was $5000
“1963 JEEP FC170 4×4 pickup- Vintage
Super Hurricane
Not currently running, all parts are included
Extra Engine
Ready for restoration
Asking $5000 as is”
Not sure how much value is here.
https://seattle.craigslist.org/sno/pts/d/1946-cj2a-rolling-parts/6543906831.html
“I have a 1946 cj2a rolling project.
Includes; bare tub, tail gate, roll bar, frame, springs, steering, front and rear diffs, and wheels and tires (tires are good tread and usable, wheels are junk), clear title.
Nothing else, tub needs work, but is repairable.
$150 for Jeep w/o title
$150 for title
$300 for both
Title alone is not for sale.”
No pics provided.
https://chico.craigslist.org/cto/d/willys-jeep/6545962683.html
“Will not sell for a penny less than 1500 need bill money or I’ll keep it so if your gonna low ball keep scrolling the title alone is worth the asking price everything is there that you would need plus an extra motor non OP current have pink in hand in MY NAME no bs tire kickers”
No pics provided.
https://fresno.craigslist.org/cto/d/1946-jeep-willys-chevy-350/6545021835.html
“Own a piece of history. 1946 Jeep Willy with a chevy 350. 4 speed tranny with warn overdrive. Lockers front and rear. 2″ lift with 32″ bfg’s. Leather seats and z28 steering column. Winch doesn’t work. Full roll cage.Tow bar.spare tire w/ highlift jack.soft too with full doors and I also have metal half doors that go with. Motor has msd ignition, intake and headers. Low miles.Sounds real good.has a lot of power for an old Jeep. Asking $9500 obo as is.”
UPDATE **SOLD** Was $1895
(02/22/2018) This late model CJ-3B has some Desert Dogs in great shape.
“Hello, I have a CJ3B project for sale, It includes the body as seen in photos, new frame with springs Dana 44 rear axle, Dana 30 front axle and four good Desert Dog tires. This is a new reproduction frame, not a sandblasted old frame. I have installed Saginaw steering using Jeep Parts from a 1971 Jeepster Commando, is a very good installation, and a trailer hitch made from 3/8 steel plate, so it is plenty strong and looks nice. Also, the front bumper is made out of 1/4 steel plate that I had made to look like a stock bumper, so it is really strong over a stock bumper. This is a very good start for a project, and I also have other Jeep parts for sale if interested in building a solid Jeep project. This project comes with the original VIN plate for registration, but this project is being sold with a bill of sale only. I can deliver this Jeep within 100 miles for fuel costs both ways.”
UPDATE:**SOLD** Was $750.
“1948 willys cj2a project or for parts.The tub is rusty and full of bondo. Frame and axles are good. Have trans and transfer case. No title, can build for a fun off-road or farm jeep. Have windshield and hood , and gas tank.”
UPDATE: this is a follow up to my March 1st post (you’ll note there are some comments from some readers from that day).
I’m ready to order posters. The original was almost 28″ tall by 22″ wide. I’ve decided to make the final version exactly 28″x22″ rather than my initial 18×24 size. The printing is being done by the same folks who printed all our Alaska Or Rust stuff. They do good work. I’ve already received a 18×24 proof and it looks great.
The per poster cost means I would need to charge $20 for each poster. One poster would be $20 plus $5 shipping. Two or more posters means free shipping in the continental US. How does that pricing sound? I plan to order 100 posters, so the supply will be limited. I will be selling them online and in person as I travel around in May and at the Willys Reunion in May.
UPDATE: Price dropped to $2000.
(10/13/2017) Nice looking barbecue.
https://chicago.craigslist.org/chc/cto/d/jeep-willys/6543420662.html
“selling a 1940s willys tow behind bbq grill il, title all led lights built 4yrs ago all steel const, very heavy duty, leaf spring suspension”
Craig spotted this rear Matta in the US.
View all the information on eBay
“I bought this military Alfa Romeo Jeep 1.9 with an intension to finish restoration that has already been taken place. As you can see through these pictures, some gauges are missing, some need to be restored. All electrical wires are very dry and some missing parts in differential, so I have a new rear end, but i have no time to complete it. Rebuilt engine and transmission, made and rebuilt in Italy from the previous owner. the car still runs and drives. Uses front wheel drive. Great project. Something very unusual and unique. This has the same engine that they used in the 1900 GS, which is the only engine that is worth a lot of money. This jeep comes with customs forms only.”
Looks like it could be cleaned up and used some more.
https://eugene.craigslist.org/pts/d/willys-jeep-tire-holder/6528561596.html
“I have a Kayline jerrycan and spare tire holder that came off a 1950 CJ jeep.”
UPDATE: **SOLD** Was $3500.
(03/05/2018) Chris spotted this DJ-3A. Looks like a good price and it appears the Navy tag is on the far right side of the dash.
“1962 Department of the Navy, Willy’s Jeep, Flat Fender, Model DJ3A. $3,500.00 firm, will also consider trading for a mid-size pickup truck of equal value.”
UPDATE: **SOLD** Was $4900.
(12/15/2017) This is a very hard-to-find DJ-5 model (this differs from the postal model). Even harder to find is the DJ-6. This looks in real good shape. It has the correct starting VIN of 8505 1227 and it has the four lug hubs. This also has a ventilating windshield, also an option on the original DJ-3A starting in 1956.
“1965 Jeep DJ5. Very similar to CJ5. Rebuilt Engine with only 430 miles. 3 speed manual transmission. Rare 2WD. Almost totally restored. Rebuilt Carb. Rare split windshield with new weather stripping. New shoulder retractable seatbelts. Paint is newer, but has its problems. NO Rust, Frame is very solid ( sealed with por15). Wipers are vacuum operated, but missing hoses. All lights work. New LED brake lights. New rear main seal. No Leaks! except for a once in a while drip from master cylinder. Think that’s just coming from cap. New brake lines, hoses, shoes, W cylinders and master cylinder. Tires are military. Old, but no cracks and hold air. They look new. Comes with- newer tow bar, original soft top and doors (rough), original engine head and manual.”
UPDATE: **SOLD** Was $1200.
It runs.
“For Sale- willy’s jeep with plow
-Plow works fine. Appears to be homemade.
-This has a newer ford inline 6 engine, I believe it is out of an early 60’s comet?? It runs decent, but sometimes stumbles and dies when it warms up. I just noticed that one motor mount broke off of the frame and needs to be rewelded.
-4×4 works great
-clutch chatters sometimes and the 3 speed manual transmission doesn’t like to shift into second gear if the jeep is moving.
-it does have a heater in the cab.
-I have extra wheels to go with it
-the brakes do NOT work
-I do NOT have a title for it.
-the body has rust, but the frame looks decent.
Located in Hibbing, Mn
I’m asking $1200. Cash only, no trades
No emails please. Call or text only”
UPDATE: **SOLD** Was $7995.
(01/29/2018) The seller very honestly points out some weaknesses in the jeep.
“Up for sale is this very nice 1964 Willys CJ3B. The last of the flat fender jeeps. This one is in excellent physical and mechanical condition. There is no rust through on the jeep. The paint is decent on the exterior, but there is overspray in the engine compartment and whoever did the paint job did not clean off all the light scale on the rear floor and fenders and just painted over it, so the paint is the weak link.
It runs, starts, drives, and stops like it should. has a radio in the dash that will work if speakers are hooked up. Seats are good and drivers side has a piece of tape on the top edge as shown. I recently installed a period correct Kayline soft top and doors, and it is excellent.
Continue reading
1 runs, 1 is a project, 1 is a parts Jeepster.
https://saginaw.craigslist.org/cto/d/three-1949-willys-jeepsters/6539836650.html
“I have three 1949 Willys Jeepsters.
First 1949 nice shape had running last year. It has a Chevy 4cyc auto trans out of a 1964 Nova and ford 9inch rear end. 7000.00
Second is a project with a 4.3 Chevy 700R trans and a Chevy rear end. I have the front end bumpers and top frame for it + front seat. 2500.00.
Third is for parts with original running gear doors, fenders and top frame. 500.00.
Pics are from first to third. I have two clear titles for 1 and 2.”
UPDATE: **SOLD** Was $2500.
“Everything original she’s a beauty. She isn’t running right now but she’s a classic. Come and get it at a steal.. Just $2500.”
UPDATE: Still Available.
(03/13/2018) Has no brakes.
https://bham.craigslist.org/cto/d/1962-willys-jeep-runs-good/6518039422.html
“1962 willys Jeep
Runs good but needs breaks.”
It’s a project.
https://pittsburgh.craigslist.org/cto/d/1961-willys-jeep-cj-3b/6544145730.html
“1961 Willys CJ-38 “High Hood”
2.2L 134ci Hurricane I-4 engine (fresh rebuild)
T90 3spd Transmission, All new internals
Dana 18 Twin Stick Transfer Case, All new internals (1 1/4″ intermediate shaft)
Dana 27 front axle with 5.38 gears stock
Dana 44 (tapered shaft) rear axle with 5.38 gears stock
Body is all Reproduction with correct holes drilled by Willys Overland Motors in Toledo, Ohio.
Hood, Grille and Tailgate are stamped with Willys Logo
Kelly Deluxe Hardtop with doors and rear window, some glass is broken.
Continue reading
Needs work.
https://nashville.craigslist.org/cto/d/1968-nissan-patrol/6533644483.html
“I’m selling a 68 Nissan patrol for $2,500. This Nissan is in need of restoration. Everything is there including the right rear window not shown in the pictures. The frame and floor pans are all original and look great. If you are looking for a rare vintage 4×4 that will probably be the only one at car shows, then this is it! The car has been parked for many years. It rolls fine, engine seems to be locked up, and the right rear tire looses air. I have a bill of sale but no title.”
Not sure what’s all here, but no VEEPs that I’ve seen ever used a 2A body.
https://greenville.craigslist.org/cto/d/1952-vw-jeep-or-veep-cj3a/6544834129.html
“I have a jeep tub and parts with a tube frame for Veep VW original jeep parts go with this needs gone don’t have time to build.”
UPDATE: **SOLD** Was $4500.
Needs engine. May have a replacement body.
“1948 Jeep Willys
-Great shape
-4 inch lift
-Needs motor
-Tranny and drive train are all there”