UPDATE: **SOLD** Was $700/each.
“(2) Two WWII Ford GPW Jeep engine, both will require a rebuild, no cracks that I can see, One is together and the other is apart, but all main components are included. $700 Each”
UPDATE: **SOLD** Was $700/each.
“(2) Two WWII Ford GPW Jeep engine, both will require a rebuild, no cracks that I can see, One is together and the other is apart, but all main components are included. $700 Each”
No pics provided.
https://chico.craigslist.org/cto/d/willys-cj3a/6545555794.html
“Great restoration project! engine was rebuilt some years ago. Original drive train with over drive 4X4, Roll Bar, Tow bar in front, good straight metal body. High and low range with three stick shifts, foot push starter. has been sitting for several years. Everything is there to finish and make original. No title, has been in family 30 plus years. CASH ONLY NO PAY PAL SCAMS”
UPDATE: Still Available.
(03/23/2018) Better pics would be more useful.
https://wheeling.craigslist.org/cto/d/1946-willys-cj-2a/6535256434.html
“1946 CJ-2a
Original drive train
Body patched in places
Frame good
6 volt system
Have parts to convert to 12 volt
$3000 obo”
UPDATE: **SOLD** was $4300
(03/03/2018) This has an interesting orange and blue motif.
“1948 Willys
Fresh paint, Orange with full cage.
Rebuilt 225 v6 short block, custom fender well headers, Offenhauser 4bbl intake, Accel coil.
Good T14 tranny with rebuilt transfer case.
Too much stuff to list.
Price is cash only and serious inquiries only.”
UPDATE: Still Availalble.
(03/14/2018) That crossmember looks upside (and incorrect for a GPW.
https://inlandempire.craigslist.org/cto/d/1943-ford-willy/6523765868.html
“1943 Ford Willy no engine no transmission bill of sale only asking $1500”
UPDATE:**SOLD** Was $3700.
(12/05/2017) It runs rough and has some rust.
“1950 JEEP WILLYS CJ3A, OVERSIZE TIRES, MECHANICALLY SOUND BUT RUNS A LITTLE ROUGH, 12 VOLT ELECTRICAL SYSTEM, NEW ELECTRONIC IGNITION DISTRIBUTOR, NEW SOLEX CARBURETOR, 9″ DRUM BRAKES IN FRONT, NEW BRAKE SHOES ALL AROUND, NEW ALTERNATOR, NEW VOLTAGE REGULATOR, NEW STARTER SOLENOID, NEW MASTER CYLINDER, NEW WHEEL CYLINDERS, ALL BRAKE LINES REPLACED, REBUILT TRANSMISSION (NO JUMPING OUT OF SECOND GEAR), NEW CLUTCH DISC, NEW THROWOUT BEARING, REBUILT STEERING SYSTEM, NEW WINDSHIELD, NEW SPEEDOMETER AND CABLE, CANVAS TOP AND DOORS, ROLL BAR. CHASSIS SOUND, BODY ROUGH – SOME RUST. SERIAL NUMBER 38690.”
UPDATE: Price dropped to $3000.
(03/02/2018) I think this thing runs.
https://northmiss.craigslist.org/cto/d/1942-willys-jeep/6512870202.html
“Hunting Jeep. Used to retrieve deer truck couldn’t. New battery, new starter, I converted it to 12v & put key starter on it. New flywheel, tires are great!. No brakes. Drivetrain is bulletproof.”
I’m still looking for the 1001 list. You can see the original ad at this link.
Bill shared these.
UPDATE: Still Availalble.
(03/18/2018) Bill shared this modified GPW. Could be a good price. I love the classic paint job. It’s listed as a 1941 Ford Jeep, but looks to be a GPW, which makes it ’42 or later.
https://reno.craigslist.org/cto/6533239565.html
“Ran years ago before man passed away. “NO TITLE. AS IS”
Boxed frame corvette 327. Custom exhaust headers, custom 4speed.
Way more customized to much to list.”
Ted spotted this one. Looks like a good price.
https://www.hemmings.com/classifieds/cars-for-sale/jeep/jeepster/2090877.html?refer=news
“1968 Jeep Jeepster, powertop convertible, 225 V6, auto transmission, continental kit rear bumper, all original interior, all original fiberglass in perfect shape, totally complete car, some rust, all California non-op up to date.”
UPDATE: Still Available.
(03/21/2018) It’s got some updates.
https://up.craigslist.org/cto/d/1947-willys-jeep/6535178712.html
“1947 willys jeep on a cj5 frame. V6, 35×12.50 Mickey Thompson Baja claws, American racing wheels, runs amazing will go through anything you want it to, asking $7250 obo,”
Looks like there’s value here.
https://sfbay.craigslist.org/scz/cto/d/1950-willys-cj3a/6544668074.html
“Have owned since 1967
No paper.
Project or parts.
not running.”
Could be a good price.
https://jacksonville.craigslist.org/cto/d/jeep-4×4-turbo-diesel/6544823402.html
“Willys sold the rights to build Jeep CJ3’s in Japan to Mitsubishi and they have been made there for over 40 years. This one is a 1991 has a Mitsubishi 2.7 turbo diesel. This was built from the factory to go offroad, Dana 44 rear Dana 30 fronts, 4 speed runs and drives it is a little tank. This is a great jeep. you know you always wanted a diesel Jeep here is your chance. Right hand drive. Clear Florida Title. http://www.floridaminitrucks.com.”
UPDATE: **SOLD** Was $10,000.
Looks solid.
“1952 m38 military jeep nice original old jeep never apart only painted one time lots of nos parts runs & drives good may trade”
UPDATE: I was brain dead on this listing. It’s one that’s been for sale for a while, but was recently listed in Cle Elum. (Thanks for correcting me guys!)
https://seattle.craigslist.org/est/cto/d/1954-jeep-cj3b/6546744792.html
“Well preserved 54 hunting Jeep, all original low miles. Body is solid and runs good.”
UPDATE: Still Available.
(03/08/2018) Seller lists this as both a 1951 an a 1956.
https://medford.craigslist.org/cto/d/1956-willys-jeep/6518497654.html
“1956 Willys Jeep with 283 Engine – Has canopy and doors”
UPDATE: **SOLD** Was $1400.
May have some parts value.
“1964 jeep kaiser m151 mutt military for restore or parts body in rough shape. 4×4 . Independent front and rear suspension . motor . transmission . Tranfercase complete. Needs radiator. And wiring. Tons of spare parts all go with it. Bill of sale”
UPDATE: **SOLD** Was $5000
“1963 JEEP FC170 4×4 pickup- Vintage
Super Hurricane
Not currently running, all parts are included
Extra Engine
Ready for restoration
Asking $5000 as is”
Not sure how much value is here.
https://seattle.craigslist.org/sno/pts/d/1946-cj2a-rolling-parts/6543906831.html
“I have a 1946 cj2a rolling project.
Includes; bare tub, tail gate, roll bar, frame, springs, steering, front and rear diffs, and wheels and tires (tires are good tread and usable, wheels are junk), clear title.
Nothing else, tub needs work, but is repairable.
$150 for Jeep w/o title
$150 for title
$300 for both
Title alone is not for sale.”
No pics provided.
https://chico.craigslist.org/cto/d/willys-jeep/6545962683.html
“Will not sell for a penny less than 1500 need bill money or I’ll keep it so if your gonna low ball keep scrolling the title alone is worth the asking price everything is there that you would need plus an extra motor non OP current have pink in hand in MY NAME no bs tire kickers”
No pics provided.
https://fresno.craigslist.org/cto/d/1946-jeep-willys-chevy-350/6545021835.html
“Own a piece of history. 1946 Jeep Willy with a chevy 350. 4 speed tranny with warn overdrive. Lockers front and rear. 2″ lift with 32″ bfg’s. Leather seats and z28 steering column. Winch doesn’t work. Full roll cage.Tow bar.spare tire w/ highlift jack.soft too with full doors and I also have metal half doors that go with. Motor has msd ignition, intake and headers. Low miles.Sounds real good.has a lot of power for an old Jeep. Asking $9500 obo as is.”
UPDATE **SOLD** Was $1895
(02/22/2018) This late model CJ-3B has some Desert Dogs in great shape.
“Hello, I have a CJ3B project for sale, It includes the body as seen in photos, new frame with springs Dana 44 rear axle, Dana 30 front axle and four good Desert Dog tires. This is a new reproduction frame, not a sandblasted old frame. I have installed Saginaw steering using Jeep Parts from a 1971 Jeepster Commando, is a very good installation, and a trailer hitch made from 3/8 steel plate, so it is plenty strong and looks nice. Also, the front bumper is made out of 1/4 steel plate that I had made to look like a stock bumper, so it is really strong over a stock bumper. This is a very good start for a project, and I also have other Jeep parts for sale if interested in building a solid Jeep project. This project comes with the original VIN plate for registration, but this project is being sold with a bill of sale only. I can deliver this Jeep within 100 miles for fuel costs both ways.”
UPDATE:**SOLD** Was $750.
“1948 willys cj2a project or for parts.The tub is rusty and full of bondo. Frame and axles are good. Have trans and transfer case. No title, can build for a fun off-road or farm jeep. Have windshield and hood , and gas tank.”
UPDATE: this is a follow up to my March 1st post (you’ll note there are some comments from some readers from that day).
I’m ready to order posters. The original was almost 28″ tall by 22″ wide. I’ve decided to make the final version exactly 28″x22″ rather than my initial 18×24 size. The printing is being done by the same folks who printed all our Alaska Or Rust stuff. They do good work. I’ve already received a 18×24 proof and it looks great.
The per poster cost means I would need to charge $20 for each poster. One poster would be $20 plus $5 shipping. Two or more posters means free shipping in the continental US. How does that pricing sound? I plan to order 100 posters, so the supply will be limited. I will be selling them online and in person as I travel around in May and at the Willys Reunion in May.