UPDATE: **SOLD** Was $2000.
Not sure how much value is here.
“No title – Bill of Sale”
UPDATE: **SOLD** Was $5500.
Still needs work.
“Running project new tires new used seats and light bar and wiring harness just dont have the time to complete”
UPDATE: Still Availalble.
(03/26/2018) Bill shared this one.
https://sacramento.craigslist.org/cto/6542810793.html
“1948 Jeep Willys no engine or trans. Good solid body. Does have paper work”
Includes a set of fenders. Body looks fine for a custom project.
https://sanantonio.craigslist.org/pts/d/willys-jeep-tub-1950s-cj-3b/6551704575.html
“For sale, early 1950’s Willys CJ 3B tub. 80% rebuilt using heavier gauge metal. Additional supports added, (was probably going to build a crawler). Front fenders can go with the tub for free, although they are in pretty rough shape.”
Steve shared this one.
https://cnj.craigslist.org/pts/d/jeep-willys-engine-core/6546560201.html
“Jeep Willys Engine Core”
UPDATE: **SOLD** Was $1000.
“1940’s Willy’s Jeep, It ran when it was parked years ago. Head is off now was going to rebuild it last winter and plans changed. Price is best offer. will need to be restored from frame up.”
Project.
https://dallas.craigslist.org/dal/cto/d/52-53-jeep-willys-cj3b/6552137632.html
“Jeep is in pieces but all acounted for: this year model features the high hood, twon stick transfer case, hard top with sides and the hard top. Engine turns over fine by hand.”
UPDATE **SOLD** Was $3500.
(03/20/2018) Lots of mods here. It includes a WARN OD.
“Offered for sale is this 1948 Willys Jeep CJ2A. The Willys has a Buick V6 conversion that runs and drives great. The vehicle also has a GM SM420 transmission conversion that works excellent. It is equipped with a granny low gear and a Dana 18 transfer case w/ Warn Overdrive. 4-Wheel High and Low both function properly as well. The axle’s are Dana 44 front and rear. The suspension, axles, and part of donor frame have been welded to the original/existing frame. As one can see from the photos the body is a little rough but as stated above the vehicle runs and drives. This vehicle could crawl off road trails right now or could be a great blank canvas for someone to build on. The vehicle has a clean CA title. Off road use only. No plates or reg. Asking only $3,500!”
One place I’ve yet to reach is Russell’s Travel Center, a gas stop on historic Route 66 along I-40, exit 369, Glen Rio, New Mexico. Don recently stopped in their to take photos of their 1948 CJ-2A, along with some other vehicles. This year, on my return trip, I plan to stop and see it!
UPDATE II: Thanks to Fred, we have a facebook link to a couple color photos and a link to diaries (in French) thanks to the Guy’s grandson David: http://www.vehiculesmilitaires.com/viewtopic.php?f=159&t=355&hilit=sauterelle
UPDATE: Jalopnik published this story in March 2017 that gives more background to photos Charles forwarded back in 2015 (see pics below). I couldn’t find much info on the trip pat the time.
Jalopnik’s story: https://jalopnik.com/the-incredible-25-000-mile-road-trip-through-africa-tha-1823690388
I’ve been playing with some t-shirt designs. I’ve narrowed it down to three. Any thoughts?
The Portland Swapmeet is this weekend. Ted spotted a couples items.
First up, this project CJ-2A with a fiberglass(?) body. Only $500.
Looking for something less budget conscious? How about this $35,000 sign?
UPDATE: Still Available.
(02/23/2018) Looks like a solid build.
https://www.facebook.com/marketplace/item/616757315351378
“1951 Willys, stock axles, transmission, transfer case. Tilt wheel, power steering, Buick Dauntless V6 225 OddFire, brand new 11″ upgraded brakes front and rear, runs great, really nice condition, have full top and doors.”
UPDATE: Price dropped to $2750.
(04/28/2017) Has a fiberglass body and a winch and a plow. Could be worth a look.
https://www.facebook.com/marketplace/item/166400584061786
“Selling 1957 Willy’s with fiberglass body. New 12000 lb winch on front. Has snow plow that goes with it.”
Seems in good shape.
https://seattle.craigslist.org/see/cto/d/1959-jeep-willys-overland/6550784258.html
“1959 Jeep Willys Overland Pickup. All original drive 70k miles, Hurricane 6 engine, Warn Hubs, Dana Axles. Clear coat peeling and rust in lower door panels. To many projects need to sell.”
UPDATE: **SOLD** Was $7500.
(03/23/2018) Runs and drives.
“*** Super Rare*** 1959 Jeep FC170 runs and drives street legal. Clean CA title in hand. Moving across country don’t want to tow all the way there. Fires right up, decent condition. I bought two years ago and drove it home from 2 hours away. She leaks oil, just needs seals replaced. I wouldn’t suggest driving long distances but could work with you on transportation cost, or possible delivery if not insanely out of the way. Great project truck!”
UPDATE: Price dropped to $1100. It’s a project.
https://www.facebook.com/marketplace/item/602493870085709
(03/10/2018) “47 Willys hot rod project. There’s been a lot of hours put into the project to get it where it is. It’s a custom frame S10 front clip with disc brakes. Chevy 10 bolt rear end. Complete air bag setup tanks and compressor hooked up. Fuel cell steering hooked up. Brakes are hooked up. New floor and firewall on cab. Have pictures all the way through the project give me a call if you have any questions no motor or transmission!!!!!”
Not the best pics.
https://orangecounty.craigslist.org/cto/d/1950-jeepster/6518956940.html
“new top, paint decent, fun car. Runs well, great piece”
UPDATE: **SOLD** Was $4400.
Interior looks good. Bed’s been shortened. Might be worth a look.
“I bought this truck with the idea it would be my winter project. I soon learned that my body lacks the flexibility necessary to take this on. Work that had been done before I bought it:
1) bed shortened by approximately 6″
2) new wiring and shocks
3) bench seat replaced with bucket seats
4) visors, headliner and door panels redone
5) new Stewart Warner gauges (oil pressure, water temperature, fuel, battery and speedometer)
6) new door glass
7) new rear window glass (not installed)
7) new gas tank
8) working heater
The tires are in good shape. The truck runs but I would not recommend driving it until all running gear was gone through.
There is obviously a lot of body work to be done but this truck has what it takes to be something very nice.”
UPDATE: Still Available.
(01/21/2018) The grille on the yellow suggests it is later than ’46.
https://sacramento.craigslist.org/cto/d/1946-willy-cj2a-stock-jeep/6527913956.html
“Yellow one is prerty stock. Except steering.
When i got it. I fired it up and drove it around my property breifly. Brakes worked but will need attention.
Clutch worked
I since bought a new carb. Dizzy and Plugs etc. And am in process of putting it all in.
The gas is old. And needs to be cleaned out.
Rust is very minimal. Couple spots on the Hat channels.
Except steering it Otherwise seems to be all stock. It can be replaced for under 150
I have seats frame bottoms. Backs were cut off.
Price is Firm. I will not bargain. Dont bother asking me to reduce price. .”
UPDATE: **SOLD** Was $6500.
(01/16/2018) Has lots of mods.
“1946 Willy’s cj2a
New upholstery have back seat
Fuel tank moved from under driver seat to under where rear seat mounts
33″ tires 4.3L V6 electronic assist sterling box
$8500 OBO possible trades for motorcycle or travel trailer”
I’m guessing this is a best offer situation.
Travis shared this one. The interior has been patched quite a bit.
https://nh.craigslist.org/cto/d/jeep-willys-cj2a-steel-tub/6551852478.html
“Solid. Has had steel panels welded in. Good cheap replacement for one that is completely rotted out.”
Steve shared this one. It has some surface rust.
https://newjersey.craigslist.org/pts/d/vintage-meyers-hardtop-cj-jeep/6541400320.html
“Vintage Meyers Hardtop CJ Jeep $500 or best offer”
No pics provided.
https://seattle.craigslist.org/sno/pts/d/jeep-cj6-project-with-title/6550771354.html
“Jeep CJ6 roller frame with complete body, nothing else.
Not perfect but much better than most you’ll find, if you can find one at all.
Old roller tires and wheels.
Not a rusted out mess.
Serious buyers only (I can tell), all others will be ignored.
I’m not going to answer a million questions, if you’re interested in this project and know what a cj6 is, come and look at.
It’s been under cover since I’ve had it.
These are fairly rare and hard to find. Although I am open to reasonable offers, once you’re standing in front of it, I will not even listen to offers, trades, scams, shipping ideas, etc., simply put, if you’re not standing in front of it I don’t deal.
Cash, in person only. I don’t care who picks it up, but you have to be here to buy it.”