Sounds like a project.
https://www.facebook.com/marketplace/item/908928214578498
“1948 CJ2A 4 cylinder Have all the wiring for conversion to 12 volt system. New gages come with. Will have to be trailered away.”
Sounds like a project.
https://www.facebook.com/marketplace/item/908928214578498
“1948 CJ2A 4 cylinder Have all the wiring for conversion to 12 volt system. New gages come with. Will have to be trailered away.”
Unclear how much value is here. This has a Sears-branded half-cab.
https://www.facebook.com/marketplace/item/1557908001807401/
“NO TITLE 1946 Willys cj2a I don’t know much about it’s history Engine is stuck Good frame Tub is rough but fixable For parts or restore $1500 or best offer”
No description provided. It is a project.
https://www.facebook.com/marketplace/item/609096671410552
“1948 Jeep Cj2a · Convertible”
UPDATE: Price bumped to $2400.
“05/24/2024” Looks like there is some parts value here.
https://www.facebook.com/marketplace/item/423586823952841
“1947 Willy’s jeep cj2a. I bought this already disassembled to restore but my new knees are not going to let me do the work for awhile. original 4-cylinder flat head, 2b windshield, usual rust in floor, couple of dents, but still very restorable. engine turns over with attached 12volt starter.it will be for sale complete until June first, then I will be taking offers on individual parts. message me any questions you may have. Paris Tennessee area. $1600 price is firm as I am taking a loss alread”
I doubt there is much value here. Body has been repaired in at least on spot (passenger rear).
https://www.facebook.com/marketplace/item/421744040830765
“Needs gas tank, fuel pump, carb cleaned, tires. No title, Tishomingo Oklahoma”
Anyone know what used a side-shift T-84F transmission?
Glenn’s got one, but it’s set up for 2WD. So far, suggestions are that it was used in Studebakers and/or Willys cars. A side-shifting T-84F capable of using a transfercase was the transmission used in Willys MAs.
We did unearth a couple of links for further information: https://www.oldwillysforum.com/forum/index.php?threads/willys-transmission.9570/
And this: https://forums.g503.com/viewtopic.php?t=117707
Here’s a pic of Glenn’s transmission:
The site/internet was really slow last night, so I only have a handful of updates for today.
It’s been a few days since I’ve been in the shop working on the FC. Things first came to a stand still when Ann’s cousin and his family to drop by for a visit. We all had a good time. The kids wanted a ride in the race jeep, so I zipped around the property with them, which, by the large smiles on their faces, they seemed to enjoy.
On Wed night we discovered one of our calves (spending the summer at a neighbor’s pasture) had gotten pink eye in the same eye that had it last year. So, we spent Thursday morning prepping our chute and corral, then cowboy’d over all three calves to our pasture. The hurt one got an antiobiotic shot in the chute. We ran the other two through the chute for practice (to their credit, they went through pretty easily).
Ann’s cousins left Thursday following our cattle rustling. After a shower (it’s still hot here, so I’ve been sweating tonsl) and a nap, I spent some more time looking through toy haulers, class A and class C motorhomes. We still haven’t decided how much of a rig we want to get (how much will we really use it, how much do we want to spend on upkeep, what’s the most practical, etc). I also wasn’t quite sure how much our tilt trailer and race jeep weigh together. So, yesterday I decided to get them weighed.
It turns out the race jeep weighs 3140lbs
The tilt trailer weighs 3180lbs (10k GVWR)
The truck weighs 7760lbs
We originally bought the dual axle, heavy duty tilt trailer for the tractor and the zero turn mower. That it could tow the race jeep (or be winched onto the trailer) was a bonus. However, if we had the race jeep on an aluminum dual axle trailer (it looks like they run about 1500lbs or less), our total weight would be 4600lbs, allowing most motorhomes to be able to tow the jeep and trailer without modifications (5000lbs max towing capacity seems fairly common).
Ann’s mother’s 27′ class C Forest River motorhome (Ford 4350 chassis) worked fine for our travels, though it was uncomfortable for me to drive at times due to the short seats. We also never towed anything with it. And, the low quality build elments were beginning to show some wear by the time we sold it. So, I’m not in a rush to get a cheap Class C.
Here’s what we do know … We know that when we go east with the FC Tour Jeep, it will be pulled by our truck, either on the tilt or on the three wheeled trailer that came with it. My guess is that the Tour jeep will prob come in around 4500lbs, so with either trailer, I’d plan on the pair weighing 8000lbs.
Beyond that, we can either get a used Class A (preferably with new tires and upgraded suspension parts at the very least). With it, we’d probably return to making some longer spring and fall trips (we plan to sell the breeding cows and switch to just raising a few summer cows … this will give us more freedom);
OR a Class C (if we can’t find the right Class A), which would likely be a cheaper option and likely having us use it locally for a race event;
OR a Toy Hauler, but one that has a 3500 ramp and cargo capacity, which we could tow with the truck.
We hope to make a decision soon, as I’d like to take the race jeep to summer convention this year.
Decisions, decisions.
This brochure doubled as a dealer poster. When unfolded it measures 22″ x 17″. The brochure is dated 1961, which was several years before the company introduced it’s Orrville produced hardtops.
This is the folded front:
This is the folded back:
The brochure opens vertically, revealing this “Sell Power” page.
The brochure then opens horizontally, revealing this page:
The brochure opens horizontally one more time:
This is how the back looks fully unfolded: Continue reading
The Jeep Corporation General Products Division eventually became AM General. This 1970 brochure showcases a variety of vehicles offered, but also included a brief history, including a few diagrams of FJs. However, they mislabeled an FJ-3 as an FJ-3A. Also, it’s nice to see the difference between an FJ-6 and an FJ-6A.
View the whole brochure here (for sale for $99).
Here’s the FJ page, including a closeup:
UPDATE II: A big thanks to Graham for sharing this early brochure on the Hotchkiss licensed CJ-3B for the growing Hotchkiss CJ-3B thread.
=============================
UPDATE (Originally posted in Feb 2020): I’ve combined multiple Hotchkiss brochures into one post, along with some better pics.
1. This first brochure might be the earliest? I only have the front page. It was posted to eBay back in 2020:
“A rare original Hotchkiss Willys Jeep brochure undated c1950’s with French text. Brochure is very small format 4pp fold out illus in line drawings, no photos and is in very good condition.”
2. This Hotchkiss CJ-3B brochure appears to have been made in coordination with the Willys-Overland Export company, as some of the imagery and design is similar. Given the CJ-3B was considered the “New Jeep”, I’d say this brochure must have been published in 1953. Note the engine.
Below is the French version of the brochure, which is on eBay. The one below that is one from my collection.
3. Now, compare the one above to the one below. As you can see, there are similarities and differences: