UPDATE: **SOLD** Was $950.
Unclear how much value is here.
“1953 Willy’s, 17k original Miles, complete vehicle. Needs full resto, have paperwork and key. Engine does not turn over.”
UPDATE: **SOLD** Was $950.
Unclear how much value is here.
“1953 Willy’s, 17k original Miles, complete vehicle. Needs full resto, have paperwork and key. Engine does not turn over.”
UPDATE: This was posted on Craigslist, but the ad expired. When I find out which junkyard it was, I’ll update this post.
“We are parting these vehicles out.They are just one of the thousands of cars,trucks,vans,motorcycles,busses,and service vehicles that we have on our property to part out.We have almost 8,000 vehicles spread out over 100 acres,some going back to the 1920’s.We are open Monday through Friday 8 AM til 5 PM and Saturdays til 12:30.Parts on these are going so fast that the pictures are already out of date.”
UPDATE: **SOLD** Was $3500.
Lots of work to build 1 out of these 3.
A M170 is a M38A1 which has been stretched 20″ to carry 3 stretchers. Made from 1953-1963. Basically a Military version of a CJ6. Only 4000 something were produced and only a couple hundred known to survive. Includes a bunch of parts which some are NOS that are not mentioned. 1955 Willy’s M170 body, 1960 M170 body and rolling chassis and a 1961 M38A1 rolling parts chassis winch includes engine, trans and t-case. Decided to move on to another project that I can enjoy more. Asking $3500 and NO TRADES.”
UPDATE: Price bumped to $1200.
(06/25/2018) Looks like the tailgate area has been filled in.
https://phoenix.craigslist.org/wvl/pts/d/1946-jeep-willys-body/6707500894.html
“We have here a 1946 jeep Willys body no frame axles or motor. Would make a great project. Bill of sale only.”
UPDATE: **SOLD** Was $800
(08/07/2018) Not sure there is any value?
“Willys jeep cj3b
Does not have motor or transmission/transfer case.
Has running gear and the body
Looking to get it sold”
UPDATE: **SOLD** Was $16,000.
This nice looking Scout may have an original tire cover touting the Sportop. I didn’t know some of these had a fold down windshield.
“1966 International Scout 800 “Sportop”. This hard to find Scout Sportop is up for sale. It’s has a rebuilt 196, 4 cyl eng, 4 speed manual, 4 wheel drive, transmission, all parts has been either rebuilt or replaced with new parts. White hardtop in excellent condition. The rare Sportop hardtop comes off and also has a rare front fold down windshield.
A lot of work has been done and comes with many new parts. Comes with new, disk brakes, lift kit, bumpers, interior seats, wheels, steering wheel, all window seals, starter, fuel pump, rebuild carb, clutch, alternator, etc, too many to list. The interior floorings, rear bumpers and window trimmings has been layered with black liner. Tinted windows. Continue reading
Missing a few things, but pretty original.
https://siskiyou.craigslist.org/cto/d/1946-willys-jeep-cj-2a/6707306642.html
“1946 Willys Jeep CJ-2A
Original engine. Runs. 3 speed. Needs brake work. Recent major tune up including spark plugs, coil & wire set, ignition switch, battery cables, battery, oil and filter change. Body is in good shape. Trailer hitch. Tow bar.
Includes hardtop (not original), 2 doors for hardtop, accessories and 2 doors for a soft top, 2 extra wheels and tires,
miscellaneous parts.”
UPDATE: **SOLD** Was $3700.
“a nice little 1951 willys jeep for sale.its basically a complete rig that runs,but not at the moment,as it needs starter motor work.it has a vinyl top by “tigertop” that is next to new and tows nicely with its mounted towbar.it has side by side safari style rifle rack(between seats) and a couple mounted spares,as well as jerry cans and mounts .ill be getting jeep in running order soon,but thought id run ad anyway.for some reason,i cant post the pics i took. so i will text them to interested parties.im taking offers,possible trades,i know this jeep is sought after and won’t last long for sale,so please ,no low ball offers.calls or texts only,please. no emails”
UPDATE: **SOLD** Was $5000.
A work in progress.
“frame off restoration with larger brakes. Flathead engine with restored radiator and heater core. matching year of make license plates. Chassis restored including brake lines and steering column. Original body with new floors and recessed tail lights. This is a nice jeep needing a little work to finish it.”
UPDATE: **SOLD** Was $2500.
(09/24/2018) The body has seen some work. It runs.
“1946 Willys cj2a clean title. Runs motor was suppose to be rebuilt 10k miles ago or so. Shifts fine 4×4 works good. Brakes work ok. Could use tune up/old gas drained perfect for hunting rig. 6 volt system has battery but needs new one $2800”
Looks like it has an MB windshield with an adapter to support CJ-3A tops.
https://boise.craigslist.org/cto/d/1950-willys-jeep/6703435881.html
“1950 Willys Jeep in pretty good running shape…especially for a 1950. New wiring, fuel pump, water pump, alternator, battery, good rubber…ideal for a restore project…that was always the plan but just never quite got it done…owned this Jeep since 2006…always garaged since I’ve owned it…very little rust.”
UPDATE: **SOLD* Was $16,000.
Early VIN of 35979. This has an L-head, not an F-head.
“1946 CJ2-A
* F-134 motor that was re-built approx. 2 years ago
* electrical system converted to 12v
* brakes upgraded to 11″ drums, new master cylinder and lines
* new clutch/pressure plate, flywheel resurfaced
*T-90 transmission has been rebuilt
* D-18 transfer case has been rebuilt
* Front and rear differential- new seals and bearings
* New tires
* New paint
* All gauges work
* Rust free
* Everything works and drives as it should.
* Title in hand, data plates match.
Saved the 9″ drums and backing plates and many other small parts to go with the Jeep.”
Tate has this GPW project for sale.
View all the information on ebay
“1943 Ford GPW #148149. This is a good project jeep with a clear Utah title in my name. It has F script bolts on several brackets and is also stamped on the frame cross-members. The fenders are also F script. The jeep is in need of total restoration. The tub is rough and will require bodywork likely including a replacement floor and rear panel. The tub was sandblasted and primer-painted by the guy I bought it from so the rusted places are obvious. The frame is straight but will require new front frame rails. The Jeep has a unstamped CJ L134 engine and a T90. The condition of engine and transmission are unknown.”
Includes a Cab Enclosure Hardtop.
https://boise.craigslist.org/cto/d/m38-jeep-1952/6706150121.html
“This a military M38 Jeep. Only made for 2 years. The last and best of the flat fenders. Converted to 12 volt. Has lots of extra parts and goodies. Has a full winter cab and heater. Lets talk”
It’s a project.
https://boise.craigslist.org/cto/d/1951cj3a-jeep/6702449502.html
“1966 Buick Skylark 225 (3.6L) engine
Beefed up transfer case with 1” shaft
Overdrive Kit
Full Roll cage
Bestop Soft top
Radiator has been flushed and resealed
5.29 axle gears front and rear
Set up for a dual 12 volt system
Absolutely NO RUST
Continue reading
Bob’s got these truck parts for sale. Contact him at bobstpaul1958@gmail.com.
1956 Willys truck Rebuilt Dana 53 rear axle-$200
1956 Willys truck Steering box, column, and housing-$150
1956 Willys truck driveshaft-$100
Supposed to be new parts bought years ago.
https://reno.craigslist.org/pts/d/flat-fender-jeep-parts/6700121448.html
“I have new (but dusty) parts for a flat fender jeep. These are primed and have been sitting in my barn for 10 years. The need a pressure washing then they are good to go. Specifically for a 1952 M38 jeep. I don’t know if they are interchangeable with other jeeps. Would be great for a rock crawler or other project.”
Someone was looking for one of these.
https://yakima.craigslist.org/pts/d/rarecj5-metal-hardtop-with/6704452418.html
“RARE****Original CJ5 accessory! CJ5 Top and Doors complete with glass. All of it is in good shape with a little surface rust and no holes. Easy to repaint and sand rust off on this one. The brand of the top is Meyer Cabs. Came off of a 1974 CJ5 but Meyer Cabs were mostly built in the 1960s and only for CJ5 and CJ6 Jeeps.”
UPDATE: **SOLD** Was $2000.
UY”Project or Parts M151A1. Needs a rotisserie to repair rust damage under the two floor pans. I do not have the space or tools to repair this MUTT. It comes with new master cylinder, 4 wheel cylinders and new brake lines and hoses. It has two fuel tanks (one spare)spare tire bumpers, spare tire and wheel, pintle hook for the rear and other items. All of the sheet metal are available on line.”
UPDATE: **SOLD** Was $1500.
Travis shared this one. Could have parts value at the very least.
“1960s Jeep Willy’s FC170 rough shape, but near complete. Inline 6 cyl. For parts or restoration. Front winch and rear PTO. 1500$
I have it sitting at Peterborough Collision on Rte 202 in Peterborough. You can see it there. Just contact me after viewing.”
Roberto Flores shared this new ‘doodle’ of a CJ-3A.
Seller needs to sell quickly!
https://sandiego.craigslist.org/csd/cto/d/1950-willys-cj3-jeep/6697836445.html
“1950 willys.rebuilt everything from suspension to motor trans transfer case.everything original.new electrical new upholstery.comes with roll cage and tow bar.8k need sold quick.”
UPDATE: Price dropped to $3000.
(07/16/2018) Listed as a 1941, my best guess is that it is a CJ-3A.
https://phoenix.craigslist.org/evl/cto/d/willys-jeep/6704005567.html
“Have a 1941 willys flat fender jeep with a 225 Buick v6 motor, 4 speed Saginaw transmission and a Model 18 transfercase. The rear axle is a Dana 44 with a power lock, flanged axles and 538 gears. The front axle is a disc brake dana 44 with a Trac lock and 538 gears. Everything works, the tires have less than a 1000 miles on them and the front hitch is included. This jeep has literally been everywhere and has the scars to prove it. I’m asking $3500.”
Has a 3A windshield.
https://sandiego.craigslist.org/csd/cto/d/1953-willys-jeep/6702954583.html
“1953 willys jeep
Running driving and registered
Unmolested
Original running gear
Asking 8000$ obo or trade for pre smog Chevy car or truck”