Bob’s got these truck parts for sale. Contact him at bobstpaul1958@gmail.com.
1956 Willys truck Rebuilt Dana 53 rear axle-$200
1956 Willys truck Steering box, column, and housing-$150
1956 Willys truck driveshaft-$100
Bob’s got these truck parts for sale. Contact him at bobstpaul1958@gmail.com.
1956 Willys truck Rebuilt Dana 53 rear axle-$200
1956 Willys truck Steering box, column, and housing-$150
1956 Willys truck driveshaft-$100
Supposed to be new parts bought years ago.
https://reno.craigslist.org/pts/d/flat-fender-jeep-parts/6700121448.html
“I have new (but dusty) parts for a flat fender jeep. These are primed and have been sitting in my barn for 10 years. The need a pressure washing then they are good to go. Specifically for a 1952 M38 jeep. I don’t know if they are interchangeable with other jeeps. Would be great for a rock crawler or other project.”
Someone was looking for one of these.
https://yakima.craigslist.org/pts/d/rarecj5-metal-hardtop-with/6704452418.html
“RARE****Original CJ5 accessory! CJ5 Top and Doors complete with glass. All of it is in good shape with a little surface rust and no holes. Easy to repaint and sand rust off on this one. The brand of the top is Meyer Cabs. Came off of a 1974 CJ5 but Meyer Cabs were mostly built in the 1960s and only for CJ5 and CJ6 Jeeps.”
UPDATE: **SOLD** Was $2000.
UY”Project or Parts M151A1. Needs a rotisserie to repair rust damage under the two floor pans. I do not have the space or tools to repair this MUTT. It comes with new master cylinder, 4 wheel cylinders and new brake lines and hoses. It has two fuel tanks (one spare)spare tire bumpers, spare tire and wheel, pintle hook for the rear and other items. All of the sheet metal are available on line.”
UPDATE: **SOLD** Was $1500.
Travis shared this one. Could have parts value at the very least.
“1960s Jeep Willy’s FC170 rough shape, but near complete. Inline 6 cyl. For parts or restoration. Front winch and rear PTO. 1500$
I have it sitting at Peterborough Collision on Rte 202 in Peterborough. You can see it there. Just contact me after viewing.”
Roberto Flores shared this new ‘doodle’ of a CJ-3A.
Seller needs to sell quickly!
https://sandiego.craigslist.org/csd/cto/d/1950-willys-cj3-jeep/6697836445.html
“1950 willys.rebuilt everything from suspension to motor trans transfer case.everything original.new electrical new upholstery.comes with roll cage and tow bar.8k need sold quick.”
UPDATE: Price dropped to $3000.
(07/16/2018) Listed as a 1941, my best guess is that it is a CJ-3A.
https://phoenix.craigslist.org/evl/cto/d/willys-jeep/6704005567.html
“Have a 1941 willys flat fender jeep with a 225 Buick v6 motor, 4 speed Saginaw transmission and a Model 18 transfercase. The rear axle is a Dana 44 with a power lock, flanged axles and 538 gears. The front axle is a disc brake dana 44 with a Trac lock and 538 gears. Everything works, the tires have less than a 1000 miles on them and the front hitch is included. This jeep has literally been everywhere and has the scars to prove it. I’m asking $3500.”
Has a 3A windshield.
https://sandiego.craigslist.org/csd/cto/d/1953-willys-jeep/6702954583.html
“1953 willys jeep
Running driving and registered
Unmolested
Original running gear
Asking 8000$ obo or trade for pre smog Chevy car or truck”
Looks solid, but doesn’t run. It has a rear bumper that I believe was sold out of Southern California. I’m still trying to track down the manufacturer.
https://palmsprings.craigslist.org/cto/d/1947-jeep-willy/6703774597.html
“Original Jeep Willy in excellent condition gas tank and radiator took off and cleaned professionally 6000 as it sits it does need spark plugs and minor work to get it running after that I will ask a lot more not many of these Classics left on the road price to sell.”
UPDATE: **SOLD** Was $4000.
Needs work.
“Willy Jeep Project Car for sale..asking $4,000 or best offer would like to sell this jeep this weekend!”
This jeep was formerly a part of the Desert Troop Search and Rescue Squad in the State of Arizona. No description of the jeep provided.
https://losangeles.craigslist.org/lgb/cto/d/vintage-jeep-4wd-cj-2a/6683677077.html
Not sure how much value is here.
https://fresno.craigslist.org/cto/d/1957-international-4×4-and-2wd/6705103686.html
“I believe it is civilian model as it has a tailgate (missing)
Very rough, no engine/trans
No fuel tank
Trades considered, always looking for…
1955-1959 chevy trucks/parts
Small block chevy performance parts
Mopar 440 fenderwell headers”
Does not include the Buick V6.
https://reno.craigslist.org/cto/d/1948-willys-jeep-project/6698111596.html
UPDATE: **SOLD** Was $3600.
Doesn’t run.
“Clean title 1944 jeep Willy has a 302 mustang engine and headers Dana 35 front with Dana 44 rear end. Was running great when we parked it 5 years ago. It’s been sitting and doesn’t run now, needs battery and work. Needs TLC. Willing to trade for a Chevy 1955-1963”
Not many of these around.
https://orangecounty.craigslist.org/pts/d/pinto-20-willys-jeep-header/6704557203.html
“Custom made header, fits a jeep flat fender with a 2.0 pinto motor. 21/2” collector, 1/2” thick flange, Its been aluminized. Excellent condition. $300″
UPDATE: Price dropped to $8500.
(07/28/2018) Still has a floor starter.
https://phoenix.craigslist.org/nph/cto/d/1954-willys-high-hood/6703399301.html
“1954 Willy’s High Hood-No Rust, West Coast Tag Vehicle, 4 Wheel Drive-3 Speed, Must see to to appreciate-see picture or in person in Phoenix, Az. $13,500 Obo”
UPDATE: Price dropped to $5500.
(07/23/2018) Has some updates.
https://losangeles.craigslist.org/lac/cto/d/willys-jeep/6705634168.html
“I’m selling my 1953 willys cj. It has Chevy v8 small block engine and it does run. It’s clean title,non operating, and no back fee.”
Chris has these Daulmatic hub stickers for sale on eBay.
View all the information on eBay
“Vintage Willys Jeep Ford Dodge International Dualmatic hub decals sticker NEW.”
I purchased a 1957 Berg’s Truck and Parts Co (Aka the King of Jeeps) Catalog off of eBay. It included this flyer for a set of hubs I’ve never seen. Anyone ever run across these? (You can compare them to other flanges/summer hubs here: http://www.ewillys.com/2017/01/09/warns-summer-hubs/)
I ran out of time for updates yesterday (other than the K hub above).
As I mentioned last week, we’ve been busy redoing my mother-in-law’s back yard pond area. It’s meant moving and rewiring the garden outlets, replacing water pipes and irrigation hose, ripping up old landscaping, and laying 2 tons of stone for a walk way. I spent most of yesterday laying the stone (see pics below).
On another note. Ann was walking towards the entrance of Lowest yesterday wearing her “Bomb Squad” shirt, one she got from Joe in Mesa (she loves the shirt). In the Airforce, among other things, she both armed and defused bombs. That was part of her profession, so she wears her Bomb Squad shirt proudly.
Anyway, as she’s walking into Lowes, some guy in a truck drives near her as she neared the front entrance of the store and calls out to her. She didn’t understand him, so she asked him what he said. He replied that “it was nice of your boyfriend to let you wear his shirt.”
Shit, meet fan ….
Let’s just say that it didn’t go well for that guy. Ann explained that she did not need to justify her service to the man in the truck, but she did anyway, telling him that it was her, not her husband, who was the bomb expert, that it was her profession. And, if a bomb ever needed to be defused, that she ought to be the one doing it and not her husband (I concur).
The lesson here is don’t be like that guy. There are over 200,000 of active-duty women in the military doing all kinds of work. Show’m respect.
Here are some pics of the backyard project …
Earlier in September Bernt used his CJ-5 and trailer to work on the local train tracks.
Years ago, he had a chance to bring home a retired trolley engine, seen in the pic below:
He repaired it and now it is used for events like the Oldtimerfruender event.
Mark’s got this nice looking flatbed truck listed on Jeeptruck.com.
http://www.jeeptruck.com/mjs/sale18/adm369/adm369.html
“Original 1949 flatbed truck. Cab off restoration. 12 volt Ford 6 cylinder engine. 4 wheel drive works fine. A very nice slow truck.”
Mike of Watson’s Wagons has these two M-38A1s plus parts for sale.
https://york.craigslist.org/cto/d/willys-2ea-1953-m38a1s/6696431926.html
“I have two 1953 M38A1 projects. One is all original 24 V system which does run but needs a carburetor and ignition coil which I can provide. Included is a new fuel line kit which it will need. The brakes do not work. The body is rough but comes with front and rear brand new floor panels rear tailgate section and toolbox. The other 53 is a restoration in progress complete chassis has been gone through with all new brakes,seals,brake lines, etc. All the heavy lifting work has been completed for you. T90 transmission and T18 transfer case have been rebuilt, engine has all new seals with the exception of rear main seal. Engine is yet to be tested. This vehicle comes with a new old stock body with very minor surface rust on the passenger side, standard windshield frame, hood and new CJ5 fenders (easily converted) Front seats and a whole bunch of extra parts.
Anything that I have that is M38A1 related goes with the total package. I have one set of new batteries for the vehicles. Too many small items to list . Serious inquiries only price is firm please no lowballing . I have one title for the green Jeep and to spare engines to go with it both engines are frozen most likely due to sitting.”