emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
Has a bagged (air) suspension.
https://dayton.craigslist.org/cto/d/1956-willys/6722573342.html
“56 WILLYS RAT 350 V8 , Bagged , Runs & starts Great .”
Might have some value.
https://orangecounty.craigslist.org/cto/d/1944-willys-jeep/6727376368.html
“This is a rough rolling shell, it’s a project and is missing the engine and transmission. Comes with a bill of sale only. It is a WWII Willys MB Jeep.”
UPDATE: **SOLD** Was $5000.
Probably has an F-head.
“1946 Jeep Willys. New metal body and floorboards, new electrical, and custom seat frames. This jeep has the original 2 stick, 3 speed transmission which makes it perfect for going on the beach! International engine. Runs great. Could use some new tires and seats but is fully functional.”
UPDATE: **SOLD** Was $4200
(10/08/2015) A variety of parts.
“This is a near complete O.E.M. body. I am including a complete Cj3a as a donor Jeep for the project. It is a thirty year collection of original panels now available for sale as one unit. Please email me if you are interested in taking a look. It can be seen about ten miles east of Hershey PA.”
One side has been slightly trimmed.
https://hartford.craigslist.org/pts/d/willys-jeep-weight-bar/6675636089.html
“HAVE VERY HEAVY FRONT WEIGHT BAR FROM A 1951 CJ3A.IT APPEARS ORIGINAL HOWEVER ONE SIDE HAS BEEN SLIGHTLY TRIMMED,NOT SURE WHY.”
UPDATE: **Status Unknown** Was $75.
Looks like a good price.
“One Military Jeep Combat wheel, appears to be in good condition.”
Will definitely need some work.
https://cincinnati.craigslist.org/for/d/willys-jeep-body/6717110701.html
UPDATE: It’s the Mason-Dixon show this weekend. Everyone enjoy themselves!
This year’s Mason Dixon Show will take place October 21st at Union Mills Homestead. However, if the rains return (the Homstead had flooded FIVE times this year), then an alternative will be announced a week before (on Oct 13th).
There will also be two additional events occurring in conjunction with the Gathering. On the evening of October 19th, Merlin Hanson will be holding an open house at his new place in LIttlestown Pennsylvania. On October 20th, Dee Pierini will be leading the annual Gettysburg battlefield drive.
For details on all the events, see Merlin’s blog: https://hansonmechanical.wordpress.com/2018/09/28/2018-mason-dixon-willys-jeep-gathering/ or go to the Facebook page: https://www.facebook.com/events/209218449654048/
Here’s an unusual brochure that folds out to a 16″ x 19″ poster. Price would have to drop for me to consider it.
View all the information on eBay
“Original part color folder , 8 x 9.5 folded , 16 x 19 unfolded , opens to a poster .”
UPDATE: **SOLD** Was $650.
Dan spotted this crazy thing. The transmission cross member suggests it is a 2A and the grille suggests it is most likely a ’46.
“I’m selling an old flat fender flathead willys Jeep. This was a barn find, I know very little about it’s history and have no paper work on it. All I know is that it came from Canada and it was used as a snow plow at one time, it made its way down to Washington and then sat in a barn for 40 years. Very interesting custom body with suicide doors. Both door latches and roll down windows work. Has PTU gearbox on rear bumper but the drive shaft from the transmission is missing. Engine is in ruff shape, I have not tried to turn it over yet. Drive train seams to be in working order. What you see is what you get. I will leave it on my flatbed trailer so I can deliver it to you. I will deliver it as far as Idaho and Northern California for a charge of $1 a mile.”
TJ shared this one. It might be a Veepster body. A body similar to this was available for sale back in 2014: http://www.ewillys.com/2014/05/10/fiberglass-veep-like-body-kits-lakeview-or-2875/
https://seattle.craigslist.org/oly/cto/d/vw-bug-veep-kit/6704683979.html
“Volkswagon Veep on Veep sub-frame with ball joint front axel and IRS rear suspension. Kit includes front bumper, side bars, roll
bar, and windshield frame. Excellent body that has never been finished. Will come with a notarized bill of sale only. Serious offers
only.”
UPDATE: **SOLD** Was $3500.
Looks road ready.
“VW powered Willys Jeep, Dual port 1600cc engine, 1968 swing axle transaxle, ball joint front axle,
chrome wheels, good tires, new brakes, runs and drives good, steel body, rectangular frame.
Registered as a 1953 Willy”
UPDATE: **SOLD** Was $10,000.
Looks like a good combo.
“Up for sale is my 1948 Willy’s Jeep. This Jeep runs and drives great. I recently installed a soft top, which is included in the sale. Also included is the matching bantam trailer.”
Dan shared this one. It ppears to have the dual master cylinder upgrade. Has a Koenig hardtop.
https://seattle.craigslist.org/see/cto/d/willys-jeep/6725312222.html
“1947 cj2a willys jeep. This jeep was restored frame up a few years back with photos. Runs and drives great for a old jeep. Has new wiring and brakes. All stock with rare Koenig hard top everything works.”
Nice looking truck.
https://norfolk.craigslist.org/cto/d/willys-jeep-truck/6721293302.html
“1948 willys pickup truck L 134 engine 3 spd 4×4 .updated to 12 volt, electronic distributor show stopper or daily driver”
Appears solid.
https://albuquerque.craigslist.org/cto/d/1947-jeep-cj2/6717278641.html
“1947 JEEP (WILLY’S0 CJ2-A, 79 MILES (NEW SPEEDOMETER), 4 WHEEL DRIVE, 4 CYLINDER (L-134 ENGINE) 3 SPEED TRANSMISSION, FRONT WINCH (NO CONTROLS), WINDSHIELD HEIGHT RAISED 6″, NEW RADIO, PADDED SEATS OVER WHEEL WELLS, SPARE TIRE W/CARRIER, FRONT TOW BAR, ROLL BAR (NOT ATTACHED) RUNS GREAT! Just reduced to $5900.00”
Looks like a good price on a trailer.
https://kalamazoo.craigslist.org/tro/d/willy-jeep-trailer/6724081155.html
Needs work.
https://phoenix.craigslist.org/wvl/cto/d/1951-willies-hotrod/6712628839.html
“1951 Willie’s ratrod 454 engine, hot rod needs finished all parts here, brand new thumper cam,double roller chain,lifters,Holley fuel pump electric, aluminum intake, new headers, just needs put in. New 650 quick fuel carburator, electronic ignition. $4500 OBO.”
UPDATE: **SOLD** Was $1500.
(09/06/2018) The hood is CJ, but the rest could be MB/GPW.
“1943 military jeep with some mods. Not running at this time but all running gear is in good shape. Has a 225 c.i. dauntless v6 from a 69 jeepster commando. Body needs work and it needs a master cylinder and exhaust system. This will go anywhere offroad. No title but do have some paper work.”
UPDATE: Still Available.
(09/22/2016) It’s different.
https://oklahomacity.craigslist.org/cto/d/1952-willy-willys-jeep-runs/6707125867.html
“Runs GREAT, no issues, rumbles and runs like a HOT ROD
4×4 works great
Clean Title
Selling because I don’t have time to enjoy
Ford 302 Engine
Glasspacks
Snorkel
New Brakes Front/Rear
Hydrolic Clutch
38″ tires
4-LED Front lights on switch
2-Rear LED lights on switch
1-Main cut off switch
Custom made luggage rack
Waterproof Stereo System
Cobra CB
Dual Gun Rack”
UPDATE: Price dropped to $1600.
(10/05/2018) This former DJ-3A Convertible has been modified with 4WD.
“For sale is a 1960 Willys DJ-3A jeep project with clean title. I have replaced the 2wd axles with narrow track axles from a CJ5 with front disc brakes. Has 33″ 285/70/17 BFG AT tires on brand new steel wheels. It does not have seats engine or trans. Basically a rolling tub. Floor pan was cut up by previous owner who had a ford straight 6 installed in it. I have accumulated a few parts to get it back on the road but I just have too many projects now. I have a CJ-2a parts jeep with hard top and doors, has the flat head L134 which runs but needs plug wires and a fuel pump. No title on the parts 2a parts jeep. I also have a T150/dana 20 combo that will be included along with the 2wd 3a axles. I want to sell as a package and will have both jeeps on a trailer this weekend (Oct 6-7 Cruisin the Coast) and can work out delivery if desired. I will get pics of the parts jeep this weekend. Please no calls after 9pm”
Looks good for the price.
https://springfield.craigslist.org/cto/d/1948-willys-jeepster/6718399484.html
“Convertible. 350 Olds engine. Turbo 350 transmission. S 10 rear end. Mustang II front end. Power rack and pinion steering. Power disc brakes front, drum on rear. Tilt steering wheel. Replaced water pump, timing chain and gear, carb rebuilt. Good convertible top. Runs and drives good. Fun car reasonably priced.”
UPDATE: Still Available.
(08/21/2018) Has lots of updates.
https://up.craigslist.org/cto/d/1950-cj3a-willys-overland/6722081884.html
“Ford 289 CID V8, four speed manual transmission, 4WD, power steering, front disc brakes. Runs and drives, four wheel drive works. Solid frame. The following has been done since I purchased it in 2014:
– New “Willys” stamped tailgate installed with OE hinges
– Complete rebuild of front axle with all new bearings, seals, and rebuilt locking hubs
– Complete rebuild of rear axle with new locking center section, bearings and seals
– New front brakes with new rotors, calipers, wheel bearings and disc pads
– New rear brake shoes, lines and wheel cylinders.
– New oil pan and pickup tube/screen, gaskets and seals.
– New dual brake master cylinder
– Distributor replaced Continue reading
UPDATE: **SOLD** Was $2000.
Project or parts.
“jeep i lost interest your gain 1968 az titled jeep almost all there good glass split window seats flat fenders hood motor turns over have not started it though 4cyl 24v system”
UPDATE: **SOLD** Was $400.
The bed extender seems longer than others I’ve seen. Might be custom.
“This is a vintage accessory to extend the cargo bed for a utility Jeep. It fits a CJ2, CJ3, CJ5, and Cj6. It installs easily. Just unbolt your tailgate, and bolt this in its place. No drilling is required. Your original tailgate moves to the end of the box extender.”
