UPDATE: **Status Unknown** Was $2500.
“Square body type, has roll up rear door, right hand drive, 4 cylinder, automatic. Motor is partially disassembled. . .PROJECT. NOT THE TINY JEEP-READ AD CLOSELY.”
UPDATE: **Status Unknown** Was $2500.
“Square body type, has roll up rear door, right hand drive, 4 cylinder, automatic. Motor is partially disassembled. . .PROJECT. NOT THE TINY JEEP-READ AD CLOSELY.”
UPDATE: **SOLD** Was $4300.
(11/05/2018) It’s missing a few things, including steps, the rear top bow holder and a tailgate.
“1947 Willy’s CJ2A great runner original flat head four cylinder starts right up. So many new parts:: new tires, brakes,seals,u joints,front axle shafts,sure I am missing some here….. gets so my looks at car shows. Must see to appreciate!! It is a true collector!!”
UPDATE: **SOLD** Was $6000.
(11/25/2018) It’s a project.
“- Comes with a true military engine (needs rebuilt)
– Snowcap and doors
– Snowcap windshield and regular windshield ( both need glass)
– Has a bow for the canvas top
– Front and rear seat frames”
UPDATE: Still Available.
(09/15/2018) This looks like a neat project. I’d love to get my hands on the doors and the customized windshield. And, it also has the first Muller half-top I’ve seen. Cool! I’ll be this has been sitting for years.
https://www.facebook.com/marketplace/item/188625431823502
“1948 Willy’s CJ2A rebuild project. Chevy 283 goes with it, T-90 transmission and transfer case needs to be gone through, Chevy power steering box installed, have all the body parts”
UPDATE: Still Availalble.
(11/20/2018) Doesn’t run. No description provided.
Includes a Blackhawk plow and some EasyLok hubs.
https://duluth.craigslist.org/cto/d/1947-willys-jeep-snow-plow/6758331283.html
“Flathead 4 cylinder, 12 volt system, 3 speed trans 4×4 hi-low range. Period correct hydraulic lift plow with manual angle. Newer soft top, tire chains for all 4 wheels. Starts, runs, drives, stops and plows well. Minor body rust. $4,595.”
Looks in good shape.
https://maine.craigslist.org/cto/d/willys-jeep/6754282459.html
“Willys Jeep 1959 in great condition. Runs great has been restored.”
Could be a good price. Runs?
https://www.facebook.com/marketplace/item/1867770570005473
“Jeepster commando 4×4 special 4 speed manual”
Needs some body work.
https://minneapolis.craigslist.org/wsh/cto/d/1959-willys-fc-150/6758453108.html
“Great restoration candidate – comes with two extra sets of rims one with tires, two extra doors -both for the same side unfortunately, two extra rear quarter panels, and an extra transmission pictured in the bed of the truck.”
Is this one thicker than other bumper weights I’ve seen. How many different types were there? Were their different weight amounts, too?
https://huntsville.craigslist.org/pts/d/original-jeep-farm-weight/6754949285.html
“Original front Jeep weight. Was told it is for a CJ2A, CJ3A farm jeep. Weighs app 285 lbs. Good original cond. No cracks, breaks or welds. 225.00
No TEXT or Emails.”
UPDATE: **SOLD** Was $3500.
(11/10/2018) This has an early set of Free-Lock hubs.
“This Jeep is awesome. It has been used for many photo sessions. It still has the original motor in it. It ran a few years back and parked it at the neighbors so he could use for photo ops”
Needs work.
https://indianapolis.craigslist.org/pts/d/1974-cj6-body-only/6755263280.html
“74 CJ6 body only. Some metal rework. Still on frame.”
Nick shared this video of a 1955 airplane test that included multiple shots of an Valentine APU-equipped jeep. You can see some other updates here: https://www.thecj2apage.com/forums/time-capsule-navy-cj3a-by-valentine-apu_topic37074_page6.html
UPDATE: **SOLD** Was $15,000.
Sounds like it needs a little more work? The outside has body liner on it.
“This is my 1947 cj2a that I nearly fully restored and converted to a pickup truck. Everything has been rebuilt about 3 years ago but never gets driven.. I have drove it 8 miles on the neway rebuilt flathead 4 engine. So it’s tI’m to get rid of it and move on to the next project. If you have any questions please feel free to ask. It comes with a brand new set of 5 wheels.
Also I’m not in a hurry to see it go so don’t think I’m desperate.”
UPDATE: Status Unknown. Was $4200.
Could be a good price. Appears to be a Model 90. Seller also has an M-38 and a CJ-2A for sale in the same ad.
“1948 empire tractor runs very good $4,200”
Appears in good shape.
https://sandiego.craigslist.org/csd/cto/d/1950-willys-jeep/6758387025.html
“1950 willys jeep.original motor trans.everything completely rebuilt.motor trans transfer case suspension radiator starter and much more.also comes with roll bar and tow bar”
Could use some larger pics.
https://inlandempire.craigslist.org/cto/d/jeep-willy-korean-war-army/6758093776.html
“Good condition
Runs
Street legal
3 speed manual
4×4”
if the interior and engine bay is as nice as the exterior, this could worth a look. Is there a gas inlet sticking out the driver’s side rear?
https://kalispell.craigslist.org/cto/d/62-willys/6759816920.html
“All original, runs and drives great, trans, transfer case rebuilt, front end tight, super nice old survivor,”
Seller has an M-38 and a CJ-2A for sale (and an Empire Tractor, which I’ve listed in another ad.).
https://vermont.craigslist.org/grd/d/tracor-john-deere-la-1946/6732340846.html
CJ-2A:
M-38:
Some mods on this one. The front frame rails have been reinforced.
https://www.facebook.com/marketplace/item/688648744844192
“WW2 1943 Jeep Willys. 1/4 ton 4 wheel drive flat head 3 speed. Runs great, brand new tires, newly rebuilt engine, new battery, exhaust, new everything just about it. If you have any questions please feel free to ask”
No pics provided.
https://denver.craigslist.org/cto/d/1951-willys-jeep/6759831396.html
“needs battery , has hydrolic for plow that goes with it all intact, no top asking”
UPDATE: Still Available.
(11/13/2018) It looks like the windshield has been repaired/built from a CJ-2A Windshield. No description provided.
https://losangeles.craigslist.org/lgb/cto/d/1944-mb-willy/6750202803.html
UPDATE: Price dropped to $500.
(10/20/2018) Not sure how much value is here.
https://hudsonvalley.craigslist.org/cto/d/1953-cj3b-willys-jeep-rock/6758447183.html
“1953 cj3b Willy’s. Currently has a mopar 318 v8 out of a 86 Dodge Ramcharger, also has the Ramcharger 4 speed auto trans and transfer case in it as well.
Has a Dana 44 front axle, passenger side drop, Chrysler 9 3/4 rear axle. Front axle is vacuum actuated 4×4, was planning on converting it to a push/pull knob on the dash(kits available online)
Original frame, in great shape, frame is stretched 12 inches and fully reinforced for the stretch. Stretched frame b/c I was planning on building a LJ type look, along with the need for the correct drive shaft angle. Axles have been stretched as well. Front is about 3 inches and rear is about 8. Original wheel base was about 76 inches, now is sitting around the same as a jku
Continue reading
Carl shared the video of what looks to be an M-38 that has multiple mods, including a CJ-3A windshield and an after market dash gauge. However, the body does not have a battery box lid, suggesting it is an after market body. The flat rear wheel wells also raise questions.