UPDATE: **SOLD** Was $9500.
(11/30/2018) Looks good.
“Jeep Willy’s 1946 with Chevy 305 Turnkey
Good Condition – Automatic – 4WD
Tow bar, many extras
Current registration with pink in hand.
Nice clean fun!!!
possible partial trade for Harley.”
UPDATE: **SOLD** Was $9500.
(11/30/2018) Looks good.
“Jeep Willy’s 1946 with Chevy 305 Turnkey
Good Condition – Automatic – 4WD
Tow bar, many extras
Current registration with pink in hand.
Nice clean fun!!!
possible partial trade for Harley.”
UPDATE: **SOLD** Was $5400.
Look solid.
“Selling my running driving flat fender Willy’s, reg currently non op’d. Original L head 4 cyl motor. Fun little Jeep to cruise around. Clean title in hand.”
UPDATE: **SOLD** Was $3500.
(02/17/2018) There’s been some mods. That might be a fiberglass body, but I can’t tell for sure.
“Full top
Doors
4.3 carb
No text”
Has updates.
https://phoenix.craigslist.org/evl/cto/d/mesa-willys-jeep-1952/6775774828.html
“This Willys runs great, 231 v6 Buick engine, Edelbrock performer manifold and carb, total wiring up graded to simple system, chrome headers with baby turbo mufflers reman starter and altenator new fuel and water pumps,
Drive line front axle cj2 from 70’s T90 3 speed dual stick transfer case, rare wa rn overdrive LUK clutch with Novake linkage axles with new bearings and greasable u joints.
body rust free, new gas tank, Stewart warner gauges 11″ ford breaks I have to stay firm on the price I am losing money. really these box style willys are becoming rare especially in this condition.”
UPDATE: Still Available.
(06/24/2018) Has a Toyota engine.
https://inlandempire.craigslist.org/cto/d/idyllwild-cj-3b-jeep/6777659518.html
“Old Jeep, 1950 chasse 1953 body, Motor is a Toyota 20R, has about 3,000 miles on rebuilt transmission and transfer case 3 speed. Clutch, flywheel, clutchplate, and throw out bearing replaced less than 300 miles ago. I bought the Jeep in 2004 and now my children are grown and I no longer use it. Runs great!”
UPDATE: **SOLD** Was $1950.
Project or parts.
“Bought this in May of 2018 from a fellow in Albuquerque New Mexico, had it shipped back to upstate NY. Plans have changed. 4 brand new Tread Wright 215/85/16 tires, new clutch, new Novak hydraulic clutch assembly, new Wagner master cylinder and clutch cylinder too, 1975-77 Buick V6 with HEI, tub is decent for its age, very nice 6 point roll cage, just bought a Rebel Wiring 9+3 harness, block is mounted and I am in the process of running wires, Bill of Sale from former owner. The vehicle appears to have been built in the late 1990s. This is still a project
Cons:
Will need all new fuel system.
Brake system needs to be gone through also.
Needs work to make run again.”
UPDATE: **SOLD** Was $800.
Not sure how much value is here. The body has been patched.
“Willy’s cj2a body, fair shape has been repaired in places”
UPDATE: **SOLD** Was $10,500.
(12/06/2018) Has some updates. Not many of them, but could well be a ’66.
“66 Kaiser Jeep. Frame off restoration. Boxed in frame, lifted, new 31″ tires and wheels, custom fabricated roll cage flanged and welded to frame, 12 volt wench adaptable to front or back, tow bar, custom built bumpers, spare tire rack and nerf bars, 1,350 miles since rebuild.”
UPDATE: **Status Unknown** Was $1750.
“1963 Jeep FC170 for sale.
Does not run, however I believe the timing chain has jumped a tooth and have had the time to change it.”
UPDATE: **Status Unknown** Was $275.
(11/08/2018) Looks like a good price. Still has some hard-to-find parking brake parts.
“Willys DJ3A chassis, four lug wheels, two wheel drive, will also fit 1940’s thru late 50’s Willy’s cj2a, cj3a, and cj3b. Asking $275,”
ModMike shared this odd video on Facebook that includes a CJ-2A. I finally tracked down a Youtube version. Can anyone explain it?
This is a cardboard ride on jeep that was never opened. I imagine these jeeps didn’t last long. This particular package remains un opened. The seller has a pretty steep price on it.
View all the information on eBay
“UP for sale, I have a vintage 1960’s Little General Ride On Jeep. I can’t believe I have decided to sell this, as I have had it in my collection for over 20 years, and have never seen or heard of another. This is still mint sealed in it’s original bag package, which the package boost 2 toys, ride on Jeep and a free military poncho. Well guess what the poncho is part of the bag and you cut it out.
Toy was produced by General Box Co. of Illinois. The bag measures 40″long and about 13” wide. The toy was offered in the comic book ads of the 1960’s as a full ride on Jeep with a dress up military poncho. Who could forget those ads in the comic books? I remember wanting the Polaris Nuclear Submarine, but there were many others including a tank, spaceship and this here Jeep. They were all constructed of printed cardboard and companies like Honor House products seemed to advertise the heck out of these pieces at $4.98.
Continue reading
Chris is selling this manual that came with a later model jeep he bought.
https://indianapolis.craigslist.org/pts/d/indianapolis-tmmaintenance-manual-for/6771850269.html
“Reprint of maintenance manual for MB series Willys Jeep. Good shape, no torn pages, couple of fingerprints on covers. In great shape, would make a great shop copy for someone. I can invoice via internet and ship within the US for an additional $4.”
J.R. shared this ad for a Mitsubishi made jeep that I believe is a CJ3B-J4.
https://sacramento.craigslist.org/cto/d/1959-mitsubishi-willys-cj3b-cj-3b-rare/6767693544.html
“Hello everyone i have a 1959 Mitsubishi willys jeep cj3b for sale.
Made in Japan , military version.
Clean title . 4 wheel drive.
Currently on non-op , no back fees.
Come check it out.
Recent price drop for a quick sale.
Asking 9999$ or best offer.”
UPDATE: **SOLD** Was $7500.
Seller only wants to deal with folks in person. Nice looking truck.
“4 cylinder motor, 3 speed transmission, rear axle all original. Runs and drives great. All gauges work. Has been converted to 12V. Driver and passenger windows have small cracks, see photos. Body in excellent condition except rust in bottom of bed, see photos. Overall condition very good to excellent for being original. Repainted approximately 15 years ago. Clean Colorado title. Serious inquiries only. Face to face cash transactions only.”
This jeep has some updates.
https://cosprings.craigslist.org/cto/d/1948-cj2a-jeep/6774700787.html
“1948 CJ2A Jeep
289 Ford V8 engine.
Runs good.
Rust free body
Lock-outs
Front mounted steering
7′ Meyer snow blade included
Soft top with doors (top is rough)
This jeep is a “leftie”. Spare tire is mounted on the left side. RARE!
$5,500 negotiable”
These prices are good if you need a cheap set of tires and rims.
1. 4 Rims and Studded Tires Caldwell, ID $40: https://boise.craigslist.org/wto/d/4-tires-and-wheels-5-onford-jeep/6774107281.html
“Remove from Jeep CJ5 wheels are usable tires are old one goes flat after few days others hold are fine 40 bucks for all of them
Should fit heeps and early fords ect.
15 inch wheels 31×10.5 15 tires studded”
2. 4 Rims and Tires Lapine, OR $75: https://bend.craigslist.org/pts/d/jeep-scout-ford-1-2-ton-15-8-wheels-31/6771457309.html
“Got a set of Steel 15 x 8 Wagon Wheel type Wheels 5 on 5 and 1/2 pattern Willy’s Jeep Scout Bronco or Ford 1/2 ton pickup
Includes a set of 31 1050 tires one tire does not match but all has good tread great set of rollers or Economy Tires for winter
as pictured $75”
Needs work.
https://austin.craigslist.org/cto/d/1946-willys-flat-fender/6776621474.html
“-Transfer case is taken apart
-Engine does not start, but the engine spins freely with turn of the key
-Rear brake is ceased
-No rust holes”
Maybe someone can use these?
https://fortcollins.craigslist.org/pts/d/jeep-hubcaps/6775378979.html
“I’ve got a set of OE 1977 Wagoneer hubcaps that need a good home. They are all in good shape and would look great on a driver or they’re perfect for restoration back to showroom floor spec. Hate to see them go but would like to see them get some use, $200 OBO.”
Nothing fancy, but looks good for the price.
https://kpr.craigslist.org/tro/d/willys-bed-trailer/6771820506.html
“Box is in good shape with a couple small rust spots. 6 hole trailer house axle, good medium weight springs, Ford wheels, 2 inch hitch, 4 flat light connector.”
UPDATE: Price dropped to $500
https://roseburg.craigslist.org/pts/d/willys-jeep-hardtop/6770342539.html
“front windshield frame doors and hardtop Fits many early model Willy’s”
UPDATE: **SOLD** Was $7400.
(11/14/2018) Might make a good project.
“1948 Willys Pickup – Extended cab project. The engine is installed but hasn’t been wired. It does not run and will need to be trailered home. Open Montana title.
1948 Willys Pickup cab with panels from a Willys wagon grafted on to create an extended cab
Suburban frame
4 wheel disc brakes
Dana 60 front axle with G2 Hubs, no locker, gear ratio not known
14 Bolt rear axle, no locker, gear ratio not known
GM LS 6.0 engine with aluminum heads and iron block. Includes wiring harness and computer
5 speed manual
transfer case, no drive shafts”
I didn’t get a whole lot done the last few days, as Dad is needing more assistance. No time to do updates for Thursday, but perhaps this 1 hour video from WheelsTV will fill the void. I’ve only seen the first 15 minutes, but it looks promising thus far.
I did spot at least one item that was incorrect. While discussing the first BRC at Holabird, between 15:59 and 16:20 pictures of a BRC-60 are mistakenly shown.
Steve let me know about Metal Earth’s metal jeep DIY kits. I knew about the B-2 model (Ann has one), but didn’t know about the jeep.
Midwest Jeep Willys republished this promotional video titled: Workhorses of Industry. Thanks to Blaine for spotting it.