Search Results for: welder jeep

To Top

1958 FC-150 Rice, MN $1500

October 4, 2012 • CATEGORIES: FC150-FC170-M677 • TAGS: . This site contains affiliate links for which I may be compensated.
2

Engine is out. This seller includes an engine from an old welder that runs.  It may have low miles.

“1958 Jeep FC150 Forward Control project truck. 4 wheel drive Classic. This is a small limited production Jeep with a lot of character. Need to sell because my kids soccer now takes all my project time. Engine is out but I have one for it that you can hear run, it is the same motor that came with the FC150, an f134 hurricane currently mounted on a welding trailer, fairly low hours. Everything else is there. Tires hold air. Needs restoration but is a solid truck, the glass is all intact. No title. Call Joe at 320 Seven 6 one, 17 four five if interested.”

http://stcloud.craigslist.org/cto/3312453080.html

To Top

1960 FC-150 Arvada, CO **SOLD**

August 27, 2012 • CATEGORIES: FC150-FC170-M677 • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was on eBay.

“Well I’m sure no expert on Jeeps, but I aquired this 1960 FC-150 from a 82 year old farmer. This is what I call a true “Barn find” It has been stashed away in an old barn for over 20 years. It has all the typical rust in all the typical spots.

This was a running and driving jeep when he last parked it into storage. He had planned to put his portable welder in the back, but never got that far. He lost the title so I can only give you a bill of sale.

With the exception of a sunroof, and a missing radio, I would say that this FC-150 is almost 100% complete and original.

This would make a nifty restoration project, or perhaps A good a parts vehicle. I have no doubts that someone more mechanical than myself could have it running again in fairly short order?

This jeep is old and ugly but it has just around 63,000 original miles on it. The engine/transmission,differentials, etc. are all original. I have turned the engine over by hand and it’s free.

This jeep is over 52 years old, and I I am selling it as is.

I would much rather you plan for the worst, and hope for the best than be dissapointed in any way. And remember… no title.”

 

To Top

1946 CJ-2A Aurora, MO **SOLD**

August 27, 2012 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $900

This may have a set of early hubs.

“For sale 1946 willys Jeep. Ran when parked several years ago. Was told it has a 1949 engine. Pretty solid body with some rust in the floor. Decent shape for it’s age. No title and not running. $900 OBO Possible trade for Rat Rod project, 57 chevy stuff or good 220 volt mig welder.”

 

To Top

1960 FC-150 Pawtucket, RI eBay

August 27, 2012 • CATEGORIES: FC150-FC170-M677 This site contains affiliate links for which I may be compensated.
0

No title nor VIN tag.

“True Barn Find I believe is from the 60’s Complete vehicle

There was metal repair near the Passengers wheel well, at the time the Vin tag must have been removed and never put back on. I do not have it, I do not have a Title and I do not have a prior registration and no way to get one. So Bid accordingly.

The Jeep is complete, its a 4 cylinder F-head, cleaned out the gas tank and Carb and put in fresh gas. Cranked it a few times and it fired right up. It runs smooth, no noises and no smoke issues.

It yard drives, 4 wheel high and low work. Brakes will need work, has a 4 way plow set up but no blade. Hydralic pump on the motor.

Custom made welders body with factory counter weight over rear end.”

View all the information on eBay

To Top

Year? GPW Northern Idaho $1500

August 22, 2012 • CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.
0

The seller thinks this is a Fire Jeep because of the rear tool boxes.

“Mostly complete. Broken spring hanger, rusted out floor board. Fire package included toolboxes in the rear wheel wells, thicker spring packs and axe holders on the side. Make an awesome rock crawler or rat rod. Trade for welder or?208 691 4 two 7 four”

http://spokane.craigslist.org/cto/3187448714.html

To Top

1947 CJ-2A Frame/body Belfair, WA $500

July 31, 2012 • CATEGORIES: CJ-2A • TAGS: . This site contains affiliate links for which I may be compensated.
0

This looks like an updated former road/trail jeep.  Looks like there is a name on the hood, too.

“For sale 1947 willys body and frame, set up for v-8, frt. shackle reversal, 2″ lift springs, 2″ body lift,spare tire carrier, bucket seats with 5 point harness, full roll cage, power steering. fenders and grill not in picture but included. rear axle dana 44 with power lock. 500 obo
Also have a miller big 20 welder mounted on trailer for sale- needs fuel system cleaned and battery. 300.00”

http://seattle.craigslist.org/kit/pts/3167608482.html

To Top

1947 CJ-2A Eatonville, Wa $800

April 14, 2012 • CATEGORIES: CJ-2A • TAGS: , . This site contains affiliate links for which I may be compensated.
0

More parts for sale.  The tub is fiberglass.  The hood looks like a modified bobcat hood.

“1947 flatfender willys jeep project.Fiberglass tub and clip roll cage dana 44 rear end dana 30 disk front all sitting on a later cj5 frame title in hand $800.
chevy 4.3liter tbi vortec motor with harness and computer $400
dana 20t case bolted up to a th350 tranny $300
1947 metal tub and original frame and axles t case and tranny $250 (has a title cant find it I will get a quick title upon your purchase at the dol with you)
OR $1300 FOR EVERY THING
also have a 2 wheel drive th350 and a th400( i think not positive on the gm automatic trannys) id sell for $100 a piece rebuildable cores
all prices or best offer will entertain trades for guns ammo chain saws commuter truck (ranger or s10 ?) riding lawn mower, welder, lathe, mill, anything manly and awesome! CALL RON (TWO 5 three ) 8four7 09seven 8 CELL (253) three 70 six 7 7 nine”

http://seattle.craigslist.org/tac/cto/2958287708.html

To Top

1952 M-38 Central New Jersey **SOLD**

March 17, 2012 • CATEGORIES: M-38 • TAGS: , . This site contains affiliate links for which I may be compensated.
2

SOLD.  Was available for $5500.

Scott spotted this jeep.  Looks solid, but the seller notes it needs the rear floor replaced.

“1952 Willys M38 Military Jeep. New Jersey Title. Runs, Drives , Stops. Still 24 volt. All Military Data Tags. Warn lockout hubs. Does not jump out of gear. Recored Radiator. New Brake Shoes. Rebuilt wheel cylinders and master cylinder. New Exhaust pipes. CJ motor, not MC motor. Gamma Goat Directionals. Needs rear floor replaced will include 90 Amp. Flux Core welder. Will trade for Clean pre-1970 origional CJ5 or Cj8 Scrambler. $5500 negotiable”

To Top

Hobart Generator Andover, KS **SOLD**

December 5, 2011 • CATEGORIES: Industrial-Welder-Generator This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $500

“This is a Late 40’s early 50’s model with a flathead willy’s jeep motor that runs great. I really am looking for a single axle 5×10 or 5×8 trailer in good condition to trade for. call 207=4238 This is a picture of a simular welder to give ya an idea of what i got.”

To Top

1960 FC-170 Bend, OR **SOLD**

November 30, 2011 • CATEGORIES: FC150-FC170-M677, Unusual This site contains affiliate links for which I may be compensated.
4

UPDATE: **SOLD** Was on eBay

“ A very unique Willys Jeep FC-170.

Bought new in Oregon by a rancher – story told he bought it new and then had the engine swapped out to a Hercules 6 cylinder because it had many more H.P.  Then he had a professional welder fabricator build a hauling container on the back for hauling two horses, two cows, or maybe just one Rhino.

It has not been running for about 9 years. It has been kept in a heated storage unit for last 7 years. One cab corner needs to be replaced but they do make reproduction replacements. Right side glass needs to be replaced also.

There is a Winch under the truck and rollers under each bumper so you can winch from the front or the rear. There are doors on both sides of the hauling box for putting hay in there for the animals.  It has a snorkel air cleaner, snorkel oil breather, and a snorkel gas fill. The welds are very high quality – you can’t even see any grinding marks.This truck can cross rivers!

The tailgate is operated through a pulley system with a really cool antique crank. And it really works. Check out the pictures!   The seats were recovered early on, so the original upholstery is still on the seats.  I will add other oddities as I think of them.””


To Top

1960 FC-150 West Richland, WA **SOLD**

November 30, 2011 • CATEGORIES: FC150-FC170-M677 This site contains affiliate links for which I may be compensated.
2

UPDATE: Was $1000. **SOLD**

This looks more like a FC-170 to me.  I will be returning to Pasco tomorrow night.  I could look at this for someone if it lasts that long.

“This rare model Jeep pickup also has a utility box built for a welder and tanks. This great project ran when parked, but does need some work as shown by the reasonable price.”

To Top

1950 CJ-3A Rescue, Ca eBay

October 29, 2011 • CATEGORIES: CJ-3A, Unusual • TAGS: . This site contains affiliate links for which I may be compensated.
1

This classic 80’s build makes me drool, even with the exterior cooling fan.  It even comes equipped with a hot water shower, multiple batteries and a welder. I’m digging the creativity.

“This is a 1950 Willys Cj3a custom built Jeep. It was built in the late 80’s by myself and my father, garaged its whole life and well maintained. This jeep is a very capable off roader in the right hands. its been through the Rubicon more times than you can count with the proof on the windshield frame “jamboree stickers”. also been through hammers, moab, fordyce…. and the list gos on and on.

It has a 302 V8 with a c4 automatic transmission and a t18 transfer case with a warn overdrive unit. Rear axle is an offset dana 44 with full floating axles and lock out hubs, and an open knuckle dana 30 up front with disk brakes. ARB’s front and rear 5:38 gear ratio front and rear.New bfg mud terrain 33″ tall tires. Equipped with a welder, hot water shower, air compressor, air horn, P/A system, CB radio, Ramsey 8000 lb winch, rancho air shocks, two fuel tanks, dual optima red top batteries, cadillac telescoping and tilting steering collumn, new 2.5″ magnaflow exhaust. Also a bikini top and full top for winter driving and a factory heater. Defrosters!. TONS of spare parts!! runs and drives great. Paint could be redone has a few rust bubbles and peeling around filler neck,paint isn’t perfect but in overall good condition. probably forgot some stuff. email for questions”

View all the pics on eBay

To Top

CJ-8, ’63 Wagon, Other Stuff Middleton, Id

October 27, 2011 • CATEGORIES: Other 4x4s, Parts, Willys Wagons This site contains affiliate links for which I may be compensated.
0

This seller has a variety of items.

“I have some projects that I know now that I will probably never get to. I am really trying to simplify my life and wanna move some stuff.

’81 CJ8 Scrambler
4.2, swapped in T18 and Dana 20 t/c
Stock height and axles. Has aluminum rims and BFG A/T in 235/15’s
Has 1/2 cab but, no doors or rear window.
Needs driveshafts installed. Probably will need a rear one lengthened.
Runs but, needs work.
$2500 firm
http://s122.photobucket.com/albums/o…ns_photos/CJ8/

’63 Willys Wagon
50k original miles on the body. Has a Chevy Nova front clip graft and frame has been aligned at a frame shop. Chevy Nova 10 bolt rear axle.
Low mile LT1/4L60E 2wd setup goes with it but, not installed. I have extra sheet metal that I will let go with it also. Have a new front suspension rebuild kit and aftermarket wiring harness also.
$2500 firm
http://s122.photobucket.com/albums/o…illys%20wagon/

Front and rear Dana 60’s
front is a Chevy kingpin axle. Dis-assembled. Housing has been sandblasted and primed. Has brand new SRW hubs and rotors.
rear is all stock and outt of a 70’s Dodge. They were gonna go in the Scrambler.
$1200/pair

Miller 350 LX Tig welder.
Need I say more? This is a Cadillac among tig machines and is the upgraded water cooled setup.
$5000

Jeep Comanche bed and frame with fiberglas topper.
I was gonna make a sweet trailer to tow behind my XJ but, sold the XJ and so, really don’t need it. It does not yet have a tongue or hitch on it. Still has the Dna 35 under it but for full price I will throw in a trailer axle with 5 x 4.5 BP to match the Jeep.
$250
http://s122.photobucket.com/albums/o…omanche%20bed/”

http://boise.craigslist.org/pts/2671094241.html

To Top

1947 CJ-2A Paul, Id $2000

October 9, 2011 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

No pics provided.

“Great project. 1947 CJ-2A It is the first year of the civillian jeep. It has the F head 4 cylinder w/ low hrs. 3 spd. trans. Body is in fair shape some rust in tub below driver and passenger. This is definitely a project. Hasn’t run in many years. Was stored inside part of the time and covered outside the other. Transmission is out but all the parts plus a spare trans. and trasfer case are there. It doesn’t have a hard top or doors. With the exception of the F head it is all original. Would consider trading for a miller bobcat 225 or 250 portable welder”

http://www.ksl.com/index.php?sid=0&nid=443&tab=list/view&ad=4658850

To Top

Year? CJ-2A Mosier, OR **SOLD**

September 16, 2011 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was at auction.

(3) farm tractors, mixed cars & trucks, orchard sprayers, older farm implements, crawler, shop tools & equipment, “Warn” winches, beekeeping accessories, antique cider press, generator, 2,000lb pressure washer, antique saddles & pack gear, 3-wheelers, mixed chains, (40+) aluminum orchard ladders, D4 Cat (inop), “Davis” trencher, pneumatic tire gas drive 4,000lb forklift, “Woods” PTO drive farm mower, 300 gallon “Mitchell” sprayer, several older grain drills, 20′ fruit bin trailer, travel trailer, Jeep Willy’s, forklift attachments, “Lincoln” welder, drill press, bolt bins, yard tools and much more!”

To Top

1951 M-38 Burleson, TX **SOLD**

June 13, 2011 • CATEGORIES: M-38 This site contains affiliate links for which I may be compensated.
0

UPDATE: *SOLD** Was Make Offer

(06/03/2011) Needs work.

“I bought this jeep for a project…… But i just don’t have the time. Trades welcome small gas welder or tell me what you have. ( OR COME LOOK AND MAKE A RESONABLE OFFER) This Jeep is all original . The flat head engin needs gone through & didn’t have gas tank or seat’s, other than that it’s a fun project and now it’s in my way in the shop.”

To Top

1943 Flattie Penrose, Co **SOLD**

June 3, 2011 • CATEGORIES: MB This site contains affiliate links for which I may be compensated.
3

UPDATE: **SOLD** Was $4500.

(04/06/2011) This owner is selling to pay for school.  To be blunt, if you read the description, you’ll agree that’s a good idea.

“i have a 1943 WW11 jeep willys for sale. iv rebilt it frum the ground up frum the body and the hole power train all rebilt. but over the time i was driving it around the house the water pump went out and it cracked the head but i put a new water pump on it all it needs is a new head. the moter runs amazeing and it off roads grat every thing works but it needs the brakes bled. it even has a 50cal bulit hole that i didnt fill in with my welder. and i have uther parts like, a nuther moter and tranz and t cace, two genaraters, carb,bellhouseing, frunt and rear drive shafts, engein block, and a rear diff with leaf springs. im saleing it cuz i need the mouney for school so i would like 4500 but im open for outher off’rs.”

To Top

Shep’s Mock Browning M37

May 21, 2011 • CATEGORIES: Features, How To This site contains affiliate links for which I may be compensated.
0

Shep built this custom M37 and thought others might be interested in it.  Thanks for sharing!

Shep writes, “Just wanted to show you some pics of the dummy gun I made a couple days ago.  This dummy gun for the most part is based on the browning M37; which was actually put on tanks instead of Jeeps in Korea.  But I thought it was one of the coolest looking of the Browning .30 cals so decided to use its specifications.  For the main box of the gun, I used an old piece of 1/4 inch 3×5 tubing, which I found was a mistake because almost all other pieces I welded too it was close to 1/8 inch, thus the voltage on the welder had to turned way up to penetrate the box.  The barrel shield was the hardest part.  I had to measure all of the distances correct, and I couldn’t start drilling with 13/16″ bit, I had to work my way up.  The handle on the back is an old axe hand I cut down and threaded.  The bolt shucks back and forth and the sights flip up and down.  The gun pivots up and down as well as side to side.  The pedestal has an ammo can bolted to the side for realism.  I still need to drill the bolt holes for where it mounts in the back of my Jeep, but overall I think this is gonna look good in the M38A1.  The gun also comes off the pedestal, I hope to make an attachable bipod for it in the future.  Hopefully I get pulled over because the cop thinks it’s real, that means I did a good job making it!”

To Top

1948 CJ-2A Evansville, In Auction

May 1, 2011 • CATEGORIES: CJ-2A • TAGS: , . This site contains affiliate links for which I may be compensated.
3

This jeep will be auctioned on May 4th, 2011, www.WeAuctionEverythingOnline.com.

“1948 Willys jeep in great shape, rides and drives great has had $3000 engine overhaul. You can buy this one at your price. This jeep will be auctioned wednesday May 4th at www.WeAuctionEverythingOnline.com. don’t miss it.
Also available 06 Komatsu 4wd 4 wheel steer backhoe,JLG 120′ 4x4x4 boom lift, JLG 33rts rough terrain scissor lift, Genie 25′ articulated boom, 05 Vermeer trencher, 02 Sterling day cab with only 170k, trucks, cars dump truck (4) forklifts, welder, plasma cutter, generator, hotsy, pressure washer, hydraulic hose maker, poly pipe fuser, oil/water well equipment, tools and tool boxes, New truck accessories: brush guards, running boards and bed covers. Plumbing: skids of new sinks and toilets. Restaurant equipment: freezers, coolers, Lincoln table top pizza oven, chicken rotisseries, double deep fryers, commercial coin operated dryers and much more. Auction will be held wednesday May 4th starting ar 8 am and lots will start ending at 6pm. All at one spot 1400 N Fares, Evansville, IN 47711
preview available tues 8-5 and wed 8-5. www.WeAuctionEverythingOnline.com”

http://louisville.craigslist.org/cto/2356954561.html

To Top

1957 FC-150 Larimore, ND $1000

April 19, 2011 • CATEGORIES: FC150-FC170-M677 This site contains affiliate links for which I may be compensated.
0

This is a project.

“Here is your next project.

1957 Jeep FC150. This will need a TOTAL restoration and will need to be towed.

It has the 134 Hurricane 4 cylinder and is 4 wheel drive. I was told the engine ran and it looks to be complete (and not stuck).

Needs extensive body work, Drivers side rear lug nuts have all broken off, so will need new studs to roll. (have a fork lift available to help load onto your trailer)

The frame and drive train all look like they are in good shape. I do have some extra parts that go with it like a spare dash and instrument cluster, spare heater, brake controls with master cylinder, clutch pedal assembly, a few glass pieces.

This project is not for the faint of heart, but when done, it will be a head turner! I get comments on it sitting in my shop all the time!

I need the space in my shop. I am putting it on here for a few days and if it does not sell within this time frame, I am going to pull the ad and move it back to my house and slowly work on it when I have the time. I have too many projects that take priority over this one so I would really like to see this go to someone who is going to be able to put the work into it rather than let it sit.

I do not NEED to sell it, so fairly firm on the price with only a little room to negotiate. (no offers for half of asking price).

I would be willing to consider a trade for an inverter type TIG welder with high frequency start that can weld aluminum or a large media blasting pot with deadman controls. Might consider a trade for guns.

It has the keys and a clear title.

$1000 or best REASONABLE offer. As I said, if it does not sell, I will put it in my garage at the house and let it sit until I can get the time to work on it. I am taking a loss at my asking price.

There are not many of these around anymore. Now is your chance to own a piece of Jeep history!

Email with any questions or to set up a time to take a look at it.”

http://grandforks.craigslist.org/cto/2335184278.html

To Top

Half Cab Hard Top Lake Elsinore, CA **SOLD**

February 18, 2011 • CATEGORIES: Parts • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $200.

Looks solid.

“Half Cab Willys Jeep top with doors. Designed for a CJ3A but came off of a 1952 M38 so it will fit your military jeep. I believe it will fit a CJ2A also, but I’m not sure. If your interested in early jeeps you will know what if will fit. All glass in in-tact, no cracks and clear. Rough in certain spots some dents and cracks, nothing a welder and some elbow grease can’t remedy. $200 ”

 

To Top

1958 CJ-5 Lorton, Va $1200

November 17, 2010 • CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.
0

The jeep runs.  Seller will throw in extra body, welder and welding supplies.

“I have a cj5 project that needs to go because I am moving and can’t take it with me. It is running but needs some serious rust repair. I have another body tub and parts to fix the jeep. I have just run out of time. The engine is a F134 4 cylinder engine that fires right up. This would be an excellent project for this winter. The set of 5, 31″ Bridgestone Dueller A/Ts are close to brand new and would cost you $780 bucks alone. Again there are many spare parts. Come out and take this fun project home with you. I might consider trade as well, let me know what you have, I am interested in firearms and possibly a running 4 wheel drive vehicle I can give to my parents for winter use. I also have a welder, helmet, welding rods and angle grinder to toss in so that you can get this thing on the road. I have a clean title in my name ready to sign over.”

http://washingtondc.craigslist.org/nva/cto/2064789285.html

To Top

1947 CJ-2A Plumas Lake, Ca $4500

August 23, 2010 • CATEGORIES: CJ-2A • TAGS: , , . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $4500

(04/24/2010) This is a highly customized, nice Jeep.  Check out the custom windshield.

“1947 Willys CJ2A.  Ford V-6, C-4 automatic transmission, rear dana 44, front dana 30, posi front and rear, 31” TSL thornbirds, power steering, 4 wheel power disk brakes, tilt column, air compressor, welder, spring over, custom windshield, bikini top, full top with full doors, clean title.

This Jeep needs some TLC, not a basket case by any means, but does need a little work. I have a 3 year old and a 1 year old that will not allow too much time in the garage.  $4500 OBO May be interested in a trade( SUV, Rhino, Ranger, RZR, Cruiser )”

To Top

1946 CJ-2A Le Claire, Ia eBay

July 18, 2010 • CATEGORIES: CJ-2A • TAGS: , . This site contains affiliate links for which I may be compensated.
1

This looks like a good package.

“1946 Willys CJ2A in original almost rustfree condition, there is slight surface rust on the under body and one spot of rust on a hat channel at one of the mounting bolts. The inner windshield has rust around the glass area and probably could be replaced. The body itself has normal farm use dents and dings but nothing serious and would be a easy restoration, the area around the side holes are probably the worst they had a rubber cover bolted to both of them see picture, I have had it about 20 years and enjoyed it as is. Mechanically it runs great and everything works, including the originak key coil switch, has normal leaks at some of the seals. The brake lines wheel cylinders and master cylinder have all been replaced. The seats have powder coated frames and replacement cushions covered with vynil, the rear seat is a reproduction. Original seat pans springs and coverings go with the Willys. Wheels are powder coated with white vynil strpes and almost new non directional tires. I believe the Willys a has about 29,000 miles as it has on the speedometer. The wireharness could stand replacing, horn button doesn’t work but the horn does, windshied glass is a litttle scratched. The Willys comes with a complete Monroe three point hitch with a motor mounted hydraulic pump not installed.PTO with rear gear box and farm belt pulley and governor,V belt pulley for generator or welder, belt driven buss saw I believe it’s a Newgren. Front bumper weight, complete operational Linkbelt capstan winch with most original parts, rope roller assy is a reproduction and winch drive bracket is fabricated from steel and works well….”

View all the pics on eBay