Needs work.
https://glensfalls.craigslist.org/atq/d/1947-willys-jeep-barn-find/6904852925.html
“Barn find from Vermont. Body Fair condition but 98% complete.”
Needs work.
https://glensfalls.craigslist.org/atq/d/1947-willys-jeep-barn-find/6904852925.html
“Barn find from Vermont. Body Fair condition but 98% complete.”
Seller is selling due to upcoming move. Looks like it has a gov dash plate.
https://hartford.craigslist.org/cto/d/south-glastonbury-jeep-cj-6-project/6903533936.html
“Posting my 1972 Jeep CJ-6 project. New frame (New, never used, OEM frame from the factory) currently sitting on brand new Old Man Emu suspension. Frame has been rust proofed and POR 15 coated. Dana 44 axle in rear with new pinion seals and brake lines. Tub in rough shape, but very salvageable. Full Meyers hardtop in very good condition. Meyers Half cab in fair good condition. Dana 20 transfer case in good working order, T-15 3 speed transmission in good working order. Also includes 2 sets of wheels/tires: original steel rims with old school steel belted offroad tires and a set of American racing wagon wheels with BGF all terrains.
AX-15 5 Speed transmission with 70k miles on it, new clutch, Dana 300 transfer case already bolted to AX15 will also be included at asking price. No motor with this project at present, but AX15 gives you a lot of options (jeep 4.0, LSX swap, Mercedes Diesel, etc.).
You will need a trailer. Tub is off of the frame, both transmissions and both transfer cases are off of the frame. Frame is a roller at present: suspension and axles are in place. I have a trailer and can transport within New England for extra fee.
Photos below show current state as well as the last time the Jeep was together. everything has been stored in doors on stands since being taken apart.
reason i’m selling: family and I are moving and don’t know where we will end up just yet.”
It’s a project.
https://rochester.craigslist.org/cto/d/north-chili-1946-cj2a-project/6905931315.html
“I have a 1946 Chassis and body that is a good start to complete a CJ2A. Motor turns over but I have never tried starting it. The body is original steel and was stored in a garage for 40 plus years. Color is a greenish yellow, I don’t know if its was original and has just aged. It has a few panels which I would replace but is in very good condition, does NOT look like Swiss cheese. Chassis has complete drive train including axles, transmission, brakes and wheels. Tires are No Good. It was stored in Syracuse area for a number of years.
It has a few gussets to front frame horns and rear V brace needs replacing. I looked for over 2 years to find these items and are the best I could find. Only reason I am selling is I have temporary storage but can’t keep there long term. I have an early flat fender parts vehicle that can be part of the deal. I also have quite a few parts for various years and am willing to sell them as one lot. Don’t ask to buy individual parts etc.
I have an offer to buy everything if I don’t sell as semi complete units. I have a 1979 CJ5 also that needs extensive body work but frame and drive train are excellent. The 79 has NY title and it runs and drives with a temporary gas tank. I did not register it. 1979 has good General AT2’s all around. 1979 is $2600 or best offer. “
Body has some rust, but other parts included.
https://swmi.craigslist.org/pts/d/mc-bain-jeep-cj3b-body/6900841995.html
“Have body with fenders and two hoods. Also available M38 frame with front and rear axles. Separately have transmission and transfer case. Also rear seat and front seats with cushions. Nice tailgate and CJ grille. All for this included for $650.00”
No pics of the CJ-2A.
https://athensga.craigslist.org/pts/d/tallulah-falls-old-ford-willys-massey/6893856621.html
“Willy’s 57 pickup parts
Rear wheel fenders
Motor
Grill
Tailgate
Hood
all in excellent condition
(Prices vary)
Complete 46 Cj2a
Very rusted, make for a great remodel project
1500$
Cj2a parts
Guages, body parts, transmissions, transfer cases
UPDATE: **SOLD** Was No Price.
Brian shared this one.
“What do you need, some or all,let’s deal have a couple trans to V8 bell housing adapters too”
Still needs some work.
https://albany.craigslist.org/cto/d/stuyvesant-52-willys-m38-jeep/6903076927.html
“This is a project I’ve been working on. I just dont have the time to finish it.
The suspension and drive train has all been redone.
It has an Edelbrock fuel inject small block Chevy, with a Muncie M21 trans and a Dana 20 transfercase. The rear is a Dana 60 and the front is a 44 both with lockers and 5:18 gears.
The front belt drive system is all custom made new brand new power steering pump and steering box. New steering column and shaft.
New high steer setup. New headers and exhaust.
New custom made gauge bezel setup with autometer gauges.
Its sitting on 36″ tires.
New Led headlights and tail lights.
All new fuel and brake lines.
New wiring harness.
Theres lots more to much to list here.”
UPDATE: Price dropped to $7500.
(08/27/2018) Has a few updates. It might have an f-head under the hood.
https://anchorage.craigslist.org/clt/d/palmer-military-38-willys/6899019740.html
“Military M38 1952 Jeep Willy (Great Fun to drive) aluminum hard top with doors and heater
new tires 31×10.5x 15 also winter set of tires with the original rims has any other new parts roof rack for kayaks”
Not sure how much value is here.
https://cnj.craigslist.org/cto/d/dayton-1947-willys-cj2a-flat-fender-jeep/6903340553.html
“1947 Willy’s flat fender Jeep. Body is complete but has some rust, partial repair has been done. I also have a 1969 DJ frame that goes with the 47. Most parts are there between the 2, and I have a spare motor and transmission that ran when removed. ”
Anyone know who manufactured this snow plow setup?Charles wrote me to ask,
“I purchased a CJ3A that has a double acting hydraulic valve. Engine runs Hy Lo pump that runs thru valve to power up and down and side to side. It also has a rod that runs out front of hood that you can raise and lower plow for hooking it up from outside. Seen one? Manufacturer?”
UPDATE: **SOLD** Was No Price
“I have three Willys Jeeps, obviously they need work. I have titles for two of them. Give me a call and we will discuss what I know about them.”
UPDATE: This is an Instruction Manual and Engine/Parts Manual for the Roof Palomino Model 60 Mower. It was formerly on eBay.
The Roof Palomino Instruction manual:
=========================
Roof Palomino 60 Operations Engien and Parts Manual:
Haven’t seen one of these for sale in a while. No mention of the mower parts.
https://www.facebook.com/marketplace/item/788615851531933/
“It is time for me to sell my Roof Palomino. It was restored several years ago and still looks good. It is located in Greeneville, Tn. I am asking $6800.00.”
Seems in good shape.
https://www.facebook.com/marketplace/item/2057567657797122/
“NEWLY LOWERED PRICE – $8500.00. Posting for a relative. Exceptional, low hour, military M274-A5 Mule with optional 4 wheel steer with a 14hp, twin cylinder engine. Works, runs and drive as should. Four wheel drive, 3 speed, high / low range, with a 1000lb load carrying capability. Also has an optional mount for a Browning (Money Talks). NO tire kickers or Low Ballers need look further nor inquire, he KNOWS what it is worth, however, there could be a little wiggle room if you are serious! NO HOLDS, cross posted, first with cash (No Trades) gets it.”
This has a replacement body. It’s missing the CJ-3A frame grille supports; instead it looks like it has the holes for the M-38 setup.
https://www.facebook.com/marketplace/item/2309960162375506/
“1951 or 1952 war jeep purchased from original owner. Project Jeep engine runs.”
Appears to have a few body patches.
https://minneapolis.craigslist.org/wsh/cto/d/saint-paul-park-cj-2a-willys-jeep-48/6902822704.html
“Recently went through and restored. Newly upholstered seats, some new wiring, new gas tank, rebuilt new transmission and differential, new brake lines, new shocks, lights, bezels, refurbished carburetor. Ready for the parade, leisure weekend rides, mudding. Great for the farm too! A real time machine… title in hand. State approved manufactured VIN. Street legal! Come take it for a test ride :)”
Tailgate looks gilled. Might be a replacement body. No description provided.
UPDATE: **SOLD** Was $14,500.
Looks solid.
“1945 GPW All Matching Numbers Frame,Engine and data plate”
Looks to be a mix of MB and CJ parts.
https://www.facebook.com/marketplace/item/351305778839831/
“missing motor but the rest of running gear is there, surface rust but no holes”
Needs some work.
https://www.facebook.com/marketplace/item/405293576986534/
“Corvette 327, 3 speed new steering box and edelbrock carburator.”
UPDATE: **SOLD** Was $5000.
It doesn’t run. That bumper must have hit something hard to be that dented!
“Mechanic & Collectors Special! 1947 Willy’s Jeep not sure what model it is. Selling for a family member who has since passed away don’t know much about it, he had it since the 80s. Doesn’t run needs work, comes with 4 spare tires,2 doors,a extra transmission and a top for it.”
UPDATE: **SOLD** Was $2500.
Seller indicates that everything is original. From the one pic it’s clear that isn’t the case.
“Project , everything original”
UPDATE: **SOLD** Was $2800.
(05/18/2019) Ran when parked … Looks to have Cutlas power lock hubs. I believe that’s a Kelly hardtop.
“Ran when parked rebuilt engine original unsure of actual miles on it. 2800 with plow 2500 without. Yes it has a clear title and is classic plated.”