Here’s a nicely detailed look at the rebuilding of the Allstate Locking Hubs/aka Husky Hubs.
Baron Rudolph Von Ripper
I was reading one of Ernie Pyle’s books and ran across his description of Baron Rudolph Von Ripper, a man who probably would have fit in with Taratino’s Inglorious Bastards. I did a little research on him. He was a well regarded artist who developed a taste for warfare.
Read about Von Ripper here: https://www.historynet.com/von-ripper-painter-gun.htm (It’s worth a read … he had a fascinating life)
Here’s one of his works that include a jeep:
When Time Magazine named Hitler Man of the Year, the magazine used Von Ripper’s gruesome illustration; Von Ripper had some up-close experience with the SS and was as anti-Nazi as anyone.
1947 CJ-2A Auburn, NY $6000
UPDATE: Still Available. Now registered for the road. Seller has added some other items, but why the other seats were replaced isn’t clear.
(03/15/2019) This jeep was for sale last October. Not sure if it is the same seller or different.
https://syracuse.craigslist.org/cto/d/auburn-1947-willys-jeep-chevyv8/6944297401.html
“1947 Willys Jeep CJ 2A—Chevy V8 engine
This is now registered & inspected, on the road.
The following are all NEW this month (July) : New seats–New tires–New plugs & wires
The following were NEW in June: New gas tank–New tail lights
First 2 pics show the new tires–the one of the front and the driver’s side
The passenger side and rear photos were taken with the old tires”
Previous pics:
1948 CJ-2A Kansas City, MO $12,500
Lots of description, but none about this specific jeep.
https://kansascity.craigslist.org/ctd/d/kansas-city-1948-willys-jeep-price/6945238769.html
Jeeps @ Work
Bernd was busy again using his CJ-5 to haul a repaired motor in Austria, then later carried garden material to the dump, while Dan used his jeep to tow his boat to Puget Sound for a ride around the south Sound area.
Bernd’s photos
Dan’s photos:
1957 Odd Truck Cheboygan, MI $650
Something unusual is afoot with this oddity. It might be a truck that’s been placed on a CJ chassis. Note how the doors have been cut.
https://nmi.craigslist.org/pts/d/cheboygan-1957-willys-jeep-for-parts/6944886401.html
“1957 Willys jeep truck, back cut short, complete. Drive. Train still intack. It has the Willys Hurricane. 6 cylinder engine, should run with some work, if interested.”
1949 Jeepster Akron, OH $10,500
Is the color Indian Ceramic or Salmon or something else?
https://buffalo.craigslist.org/cto/d/akron-1949-willys-jeepster/6945772380.html
“Nice 49 jeepster 4cyl 3 on the tree. Can hop in it and drive it anywhere. I have the side curtains for it. Very solid car.”
1946 CJ-2A Bangor, ME $11,500
UPDATE: Price dropped to $11,500.
Has a new tub among other parts.
https://maine.craigslist.org/cto/d/bangor-1946-jeep-cj-2a/6944365842.html
“Not original but a nice Jeep. Lots of new parts, new tub newly rebuilt transmission and transfer case. new Saturn Overdrive. Very solid and runs and drives very nice.”
2 M-38A1s Pelkie, MI $3000
There seems to be value here.
https://up.craigslist.org/cto/d/pelkie-2-38-a1-jeeps-projects-lots-of/6934391151.html
“2 M38 A1 Jeeps with a lot of parts included. 1 jeep is complete has’nt run in years, that is a 1960 M38 A1. The other is a ‘ 57 (,I think) it is a shell. It is rough but very restorable . Both jeeps need work , there is alot of parts included engines 1 transmission front and rear axles body parts hoods, everything goes. Jeeps and parts have been in a barn with a cement floor for Many years. Price for all $3000.00”
1953 M-38A1 Buffalo, MN **SOLD**
UPDATE: **SOLD** Was $5999.
The could be worth a look.
“1953 M38a1 Jeep (military) mostly original to my knowledge except tires and batteries and exhaust. Need a little work on the charging system. Runs ok. Has a front pto winch, comes with canvas top, doors and weather front. Brakes are soft. Solid jeep little to no rust.
Open to offers”
1952 CJ-3A New Berlin, WI $10,000
The missing drain holes on this 3A body suggests this has had some body work.
https://milwaukee.craigslist.org/clt/d/new-berlin-1952-willys-overland/6941250247.html
“Restored Military Jeep
1952 OVERLAND
Includes: Tigertop with 1 piece full soft doors, Black, Complete Top”
1951 M-38 Lockwood, IL $17,000
Looks nice.
https://springfield.craigslist.org/cto/d/lockwood-for-sale/6944694030.html
“1951 Willys M-38, everything gone thru, no rust anywhere, new paint, decals, 2 new front tires, gauges, brakes, exhaust, everything works. only reason i’m selling is I found slightly newer Jeep similar to one i drove in Army, don’t have room for two.”
2 Wagons & 2 Trucks Makinen, MN **SOLD**
UPDATE: **SOLD** Was $6000.
Unclear how many run.
“Selling these Willys there is two wagons and two trucks asking 6000 obo for all four call for more details”
1949? CJ-3A? Winthrop, ME **SOLD**
UPDATE: **SOLD** Was $3500.
Seems to be a CJ-3A.
“Willy’s CJ2A/3A 231 Buick oddfire v6 with hei ignition conversion ,12v gm 1 wire alternator , electric fuel pump and fan runs but could use a tune up , custom headers into supertrapp mufflers, Dana twin stick transfer case, t86 3 speed brand new built by herm the over drive guy(800.00) with t90 internals, 5:38 gear ratio front and rear ( rebuilt),Ramsey pto with Braden pto winch and cable, 32” swampers look new but weather cracked . Will need some minor work to be road worthy but it is 70 years old”
3 CJ-2As(?) Winchester, KY $4500
No pics provided. Unclear what the models are.
https://lexington.craigslist.org/bar/d/winchester-willys-jeep/6944390493.html
“Here we have three Willy’s two 46,s and one 48 one 46 is complete needs starter and brakes fixed the other two are in pieces enough parts to make two Jeeps I will take 4500 for everything or may trade with some cash”
Year? CJ-5 Wellfleet, MA Estate Sale Aug 10/11th
Maybe someone can find some value here? Thanks to Seth for spotting it. The pics of the jeep are below, but can also be found at the bottom of a long list of pics using the link below.
https://www.estatesales.net/MA/Wellfleet/02667/2297010?modal=true
1951 CJ-3A Allentown, PA **SOLD**
UPDATE: **SOLD** Was $16,000.
(11/18/2018) This appears to have an M-38 body. The rebuilder did a nice job of creating an installation panel for the the large speedometer.
“1951 CJ3 Jeep Restored ~This is a factory 225 Dauntless V6 engine with lots of power this is a three speed transmission, we never tried the 4 wheel drive, the jeep starts right up and drives like would expect a vintage jeep, it does have power steering added but not power brakes. There’s a lot of new parts including brakes, all lights, alternator radiator shocks belts gas tank etc, all the canvas is brand new and easily removable in a few minutes, includes 2 new canvas doors, newer seats with seat belts battery garage kept and was only in the rain by mistake for 5 minutes since restored,
we purchased this as a prop for our business and now we are moving on, this jeep is a real eye catcher at any event, certainly not a smooth ride like a new jeep but a lot of fun to drive.The gauges are not entirely hooked up, all the lights work including the 4 ways, the horn works as well. There is no rust, it has tow loops on front bumper and easy to remove tail gate… if wanted there is also mounts and latch to ad rear seat.”
1966 CJ-5 Conshohocken, PA $9000
Steve spotted this Perkin’s diesel CJ-5 with a PTO, ventilating windshield, and a Meyer half cab.
https://reading.craigslist.org/cto/d/conshohocken-1966-willys-jeep-cj5/6946132709.html
Flattening a Mitsubishi Fender
Gary shared this Instagram post by catskill_mtn_customs that demonstrates how to alter a Mitsubishi fender into a CJ-3B style fender.
Jeep Fest Shoutout From The Toledo Blade
This editorial in support of Toledo’s Jeep Fest appeared in the Toledo blade on July 26, 2019.
Learn more about the Jeep Fest (Aug 9-11) here: https://toledojeepfest.com
1965 M-151A1 Whitney, TX **SOLD**
UPDATE: **SOLD** Was $9750.
Seems in good shape.
“1965 Ford M151A1. Restored/ refurbished in good condition. Runs and drives well. Uncut with Texas title and current registration. Converted to 12 volt. Bought for parade use 4 years ago and now time for another project. Price is firm.”
1949 CJ-3A Pratt, KS $10,500
UPDATE: I thought this might be a John Deere themed jeep, but eWillys’ chief detective in Mesa identified it as a Pratt Greenbacks’ themed jeep.
https://wichita.craigslist.org/cto/d/pratt-1949-willys-jeep/6944949074.html
“327 out of 62 Corvette
36” Super Swampers
New: paint, body work, fuel tank, fuel pump and filter, steering wheel, front seats, plugs, wires, cap, rotor, air filter, and carburetor kit.
Needs: back seat, instrument panel wired, and a little brake work
Decals are not sealed and can be easily removed.”
1962 CJ-6? Watertown, MN $6500
I think this was a CJ-6 that’s been modified.
https://www.facebook.com/marketplace/item/1679005015579431/
“1962 Willys Jeep, Hurricane Inline 4 Cyl, 3 speed transmission, 4×4, Runs smooth, clear title”
1949 CJ-3A Pipestone, MN $3950
Chandler’s is selling his CJ-3A that has a VEC CJ-2A body.
https://www.facebook.com/marketplace/item/2607054176012790/
“CJ3A with very rare 2A body (has MB side panels for shovel and axe on drivers side) Runs and Drives. frame has been painted with pour 15 anti rust paint. Was converted to 12v system. New clutch, new electric fuel pump, new drivers seat, New front bumper, new electrical, new ignition new gas tank painted with Berliner. Runs and drives, and shifts nice, needs lineage for clutch adjusted. Body is in great shape newly patched floor panels and side walls with correct sheet metal, 4 small spots fixed with bondo. Entire underside of body painted with pour-15 anti rust paint. bed patched and painted with pour-15 and bed liner. Rope, and grill cover not included”
1962 FC-150 Laveen, AZ **SOLD**
UPDATE: **SOLD** This FC was purchased by its original owner; so, it found it’s way home again.
“1962 fc-150
V8 327
Front Dana 44
Rear Dana 44
Muncie 4 speed
Spicer 18 transfer
Front disc breaks
Quadra jet
100 amp alternator
HEI distributor
Clean title
Good tires
Rear window no good
Door windows need replace
I have a new radiator with electric fan/shroud I was gonna put in bed but never got around to it. So it’s still in the box
It’s a project but the main parts are there to get it going”