This two-page Ramsey Winch brochure is dated 1959, but given there’s a wagoner on the front, it’s likely front 1963 or later. Still, it’s got some neat illustrations about how to winch.
1948 CJ-2A San Luis, AZ $5500
UPDATE: Still Available.
(03/02/2019) Seller notes this has the original suspension. The problem is that this lacks any leaf springs . . .
https://www.facebook.com/marketplace/item/2162432397149997/
“4 cil 4×4 Munual of 3 changes It only runs a speed up to 40 Original suspension Arizona title Ready to go!’
1967 CJ-5 Leetonia, OH $7000
Tom’s selling his nice looking CJ-5. For more info, contact him at thjones36@gmail.com.
https://youngstown.craigslist.org/cto/6939918438.html
“A 1967 Jeep CJ5. Bought this as a basket case and took it down to the frame. Frame and axles were cleaned and painted with POR15. Axles drained, cleaned out and refilled. Transmission is rebuilt by Herm-the-Overdrive guy. Brake lines all new and professionally installed, all new brake components. Rims cleaned and powder coated with new all-terrain tires installed.
Tub was removed cleaned and painted with year correct paint, undercoated with an asphalt sealer. New gas tank and lines installed, carburetor rebuilt. The entire electrical system is all new. Re-built Dauntless V6 installed, however compression is a little lower than it should be. Runs well but needs tweaked to get it running better. New exhaust system, new alternator, new gauges, new windshield, new Smittybuilt XRC 9.5K winch on an aftermarket bumper and new seats.
Like most of these will need a little tinkering to bring it up to it’s full potential but all the hard, and expensive stuff has been done. I have extra parts and an extra engine (that needs rebuilt) to go with it. Clear title. Have over $14.000 into it at this point but just don’t have the time to keep up with it and drive it. I’m probably forgetting lots of other things I’ve done and installed but you get the idea.
Hope to find it a good home. I’ve had a blast with it.
Can help with delivery if within 200 miles.”
1975 DJ-5 Yuma, AZ **SOLD**
1947 CJ-2A Queen Creek, AZ **SOLD**
UPDATE **SOLD** Was $5500.
There’s an odd hole in the windshield frame.
“RUST FREE SOLID AZ NATIVE. RUNS AND DRIVES . ALL ORIGINAL EXCEPT 1953 MOTOR.”
1946 CJ-2A Lakeland, FL $2500
It runs.
https://lakeland.craigslist.org/atq/d/lakeland-1946-willys-jeep/6936428033.html
“Original motor running gear motor runs good body has some rust but not bad…4wd works great will climb over or through just about anything you put to the test…you can own a piece of history with this jeep i’m asking 2500 obo please message me if ur interested or have possible trade”
1948 CJ-2A Spanaway, WA $5900
Lots of updates to this crawler.
https://www.facebook.com/marketplace/item/364176144495654/
“1948 willys jeep Motor. (sbc)
Trans. sm465
T-case. Dana 20
Front. Dana 44 j10 high steer lock right
Rear Dana 44 j10 welded
Full cage to frame
Racing seats
Like new 36×12.5xR15 tsl super swamper
Winch not included”
1953 CJ-3A Fiberglass Body, Twin Falls, ID **Status Unknown**
UPDATE: **Status Unknown** Was $1800. This one has been available since 2009.
(12/16/09) I have a complete rolling chassis, would need an engine and trans with drivelines added. I have a couple transfer cases and an engine and trans I am willing to sell too, a 383 chevy and 4l60e trans”
1976 DJ-5 Dassel, MN **SOLD**
UPDATE: **SOLD** Was $800.
Runs, drives and stops.
“1976 DJ-5 Postal Jeep
Starts right up, drives, and stops
It’s rough but could be a fun project for someone. I bought it with those intentions and then got bored with it.
Clean MN title”
1950 Wagon Front Clip Batavia, OH Make Offer
Roger Martin shared this winning ad. Someone had some fun with this. Now, the seller is ready to let it go. The “price” suggests it is free, but the seller would like a buyer to make an offer.
https://www.facebook.com/marketplace/item/1325522420958688/?ref=messenger_share
“Yard. Art. 1950 Willy’s wagon front clip. Complete engine for parts. Mouse got into engine pissed on everything locked block. All other parts are good. Dashboard front hubs and suspension 4 4×4 wheels hard to find 3 speed on tree with overdrive. Come look see make offer. Hate to sell this stuff for scrap. Make me happy if someone could use it.”
Restored 1946 CJ-2A Article
The Depew-Lancaster Bee featured a story about Retired Lt. Erin Myers restoring a 1946 CJ-2AS.
https://www.lancasterbee.com/articles/retired-lieutenant-restores-1946-willys-jeep/
WANTED: L-226 Exhaust, Intake Manifolds
Frank’s looking for an exhaust and intake manifold for a 1bbl. It needs to have the heat riser. It also needs to be in usable condition without any welded parts or cracks. If you have something, you can contact Frank at frankfrain @ gmail.com (delete spaces around @).
1954 CJ-3B Rigby, ID $4000
The hood is really throwing me on this one. It suggests the jeep is a low hood, but the body is 3B.
https://www.facebook.com/marketplace/item/1069972813207048/
“1954 Jeep Willy’s…Ford 2.0 liter…SOHC 4cyl…motor is a mid 1970’s…runs excellent… Little leak in radiator”
1952 CJ-3A Edgewood, NM **SOLD**
UPDATE: **SOLD** Was $9599.
The tires sure look early. This has some EasyLok hubs. The front bumper has been replaced.
“$9599.00 FIRM lots of new parts,runs good. Need”
1946 CJ-2A Tenino, WA $7000
Lacks some steps and has probably had some body work. Includes a rear PTO.
https://www.facebook.com/marketplace/item/2819924021368219/
“1946 Willy’s CJ2A in very good condition, runs perfectly, always starts, has farm pro on the rear, black soft top, all numbers match, transmition stays in gear, original style tires in great shape, title and owners manual come with it.”
1948 CJ-2A Greensburg, PA $20,000
I’m guessing this was priced based on NADA. Still, it appears to be in good condition. Note the pipe along the passenger side fender. Any thoughts on why that is there? It does not appear to be related to the heater.
https://pittsburgh.craigslist.org/cto/d/greensburg-1948-willys-jeep-cj2a/6933853563.html
“Selling grandpa’s Jeep. No use for it. Good running condition. Includes a rear PTO, back bench seat, and the matching canvas top (with doors). The brush-hog that was used with his Jeep is also available for sale. It is registered and has a title.”
1947 CJ-2A Santa Fe, NM **SOLD**
UPDATE: **SOLD** Was $3000.
It’s supposed to run.
“Runs and drives Not street legal Clear title OBO must sell by 8/1/19”
1959 Wagon Fulton, NY $8000
Runs and drives, but needs some interior work. Might make an interesting project.
https://syracuse.craigslist.org/cto/d/fulton-willys-wagon-1959/6937941853.html
“1959 Willys Wagon from the Midwest. 350 Chevy engine, stock drivetrain. Dual exhaust, runs, drives, stops. New tires, brakes, shocks. 12V. lockout hubs. gas tank cleaned. radiator recored for V-8. All lights work. Only 2 small rust spots where dirt collected….no salt. Stored in a garage since 1992. Interior needs finishing but have everything. Have all glass, panels, seats, plus extra boxes of parts. New parts to go with vehicle; new steering wheel and horn button, new battery, all new window rubber seals, door seals and window tracks, interior paint. All the oak floor strips have been redone. Have some of the components to switch the front to disc brakes. Many other parts.”
1948 CJ-2A Santa Fe, NM **SOLD**
UPDATE: **SOLD** Was $3000.
Has a few updates, including an electric fuel pump and a hydraulic brake lock. No description provided.
1963 FC-170 Terrebonne, QC, Canada $5000 (CDN?)
Jon shared this Canadian FC.
https://www.facebook.com/marketplace/item/690380174734749/
“(translated from French) Good morning to everything. My spouse is selling his truck for the sum of $ 5 000, here are the details. This is a flat-Nose Truck FC-170, 1963, four wheel drive with recording. For Advised Restorer. The engine is a super hurricaine that bathes in heating oil. There are only 7 known copies in Quebec. The Jeep forward control is a truck made by willys motors, later named Kaiser Jeep, from 1956 to 1965. The Advanced order models were mainly marketed as a corporate, municipal, military and civil working vehicles. The beds went from simple platforms to complete trailers, tilting trucks and fire trucks. Snow blower, scratch. Lumberjack truck. Site for more information-https://lautomobileancienne.com/tag/jeep-fc-170/”
Galvanized CJ-3B Body Richland, WA **SOLD**
UPDATE: **SOLD** Was $1150.
Not sure why this would have come without steps.
“New Willys tub & hood”
2 CJ-2As? Greensburg, PA $4500
No pics provided.
https://pittsburgh.craigslist.org/pts/d/youngwood-willys-jeeps/6938762718.html
“I have 2 late 40s willys jeeps and parts”
1946 CJ-2A Tucson, AZ **SOLD**
UPDATE: **SOLD** Was $12,500.
Lots of pics of this flexed …
“Classic Willys jeep, CJ-2A, 4.3, V-6 motor. Has a custom exhaust package. Runs strong & overpowered. Mechanically sound. Only 11k miles on engine. 4 wheel drive works great. Clean title.”
1969 DJ-5A Rio Rancho, NM $2000
Runs and drives.
https://www.facebook.com/marketplace/item/1785457214890343/
“Jeep dj5a Runs, drives Message with any questions Not 4×4 Unknown mileage”
1961 FC-170 Union Springs, NY **SOLD**
UPDATE: **SOLD** Was $7000.
This is an ex-fire truck. It may need some engine work.
“truck has 9000 miles, was a fire truck.
has small holes for roof lights, and switches
rust free, very original
still has factory grease marks on axels
was yellow, then repainted red.
the “cage” on the back is just set there, for my puppies, it comes right off
This jeep runs and drives, however it has spun a bearing. The distributor was never oiled, and it siezed one day here at the farm. THe distributor runs the oil pump, and when we towed it to the shop, and fixed the problem, it has a very distinctive knock in the lower end.
There is no smoke, it was not run this way. It does start and run.”