Thanks to Jordan for spotting this one. It needs some work, but looks repairable.
https://www.facebook.com/groups/WillysSwapMeet/permalink/2421561518117113/
Thanks to Jordan for spotting this one. It needs some work, but looks repairable.
https://www.facebook.com/groups/WillysSwapMeet/permalink/2421561518117113/
UPDATE: Still Available.
(07/31/2019) Has an unusual front bumper design. Has lots of bolts/screws along the driver’s side.
https://sandiego.craigslist.org/nsd/cto/d/rancho-santa-fe-1948-willys-jeep/6964043365.html
“1948 WILLYS (Jeep). All original 4 cy. engine and drive train. Still runs!! Updated Rims, Tires, Gauges and Radio with CD Player. Has original Tailgate. $5000.
Also have a 283 Chev. Block, Powerglide trans and Chev Pos Rear End to upgrade Drive Train. $1000. for Chevy parts or $6000. for everything.”
UPDATE: Pics now provided.
(08/14/2019)
https://seattle.craigslist.org/see/cto/d/naches-1952-willys-cj3a/6975705322.html
“1952 Willys Jeep CJ3A project. New Throttle Down Customs stretched frame. Custom bumpers front and rear. Complete new body including windshield,hood,grill,fenders, and tailgate with Willys script.
New 325 hp Chevrolet 327 small block engine. Ram horn cast iron exhaust manifolds. Gear reduction starter. Dual battery tray wih Sure power isolator. 1 wire high output custom wound GM alternator. Continue reading
This potato digger was featured in a late 1940s Special Equipment booklet. Probably not many of these left.
Dean’s selling this nice looking, highly modified 2A. Contact him at
dean @ firstpickbuilders.com (remove spaces around the @)
“1948 CJ2A
Crawl ratio: 101 to 1
Engine: Chevrolet 4.3 V6
Transmission: GM Muncie Heavy Duty SM-420 4 speed with 7.05 low gear and Novak adapter to transfer
Dana 20 case with Dana 18 3.15 gears with fully synchronized Saturn Overdrive
Custom Front and rear Axle by Ballistic Trux of Rocklin, CA
• Front axle: 1974 Scout Dana AF30 narrowed to 53″, 30 spline ARB with 4.56 gears
• Rear axle: Dana 44 widened to 53″, 33 spline ARB, 4.56 gears (one piece 4340 axles)
Edelbrock intake manifold, Howell TB fuel injection & K&N Filter
40 LB Flywheel, with 11 inch clutch
Corvette Crossflow radiator w/ 16 in. flex fan and fiberglass shroud
Mallory fuel Pump
Headers
105 amp alternator with Optima battery
Oil pan 86 Astro van
Steering box: AGR Super Box 2 with P series pump
Tires: 33″ x 10.5 BFG Mud on 8′ x 15 wheels
8000 lb Warn Winch Model 8274
2″ receiver hitch (rear)
Full skid plate & 1 3/4″ DOM rock guards
Swing peddles with hydraulic clutch, 7” brake booster and dual master cylinders Continue reading
Looks solid.
https://tricities.craigslist.org/cto/d/greeneville-willys-jeep-cj/6973298768.html
I have a 1949 willys CJ-3A I’ve decided to sell. It has been restored to original condition by previous owner. Jeep has a new black soft top from Besttop. This little jeep performs and looks outstanding!”
UPDATE: **SOLD** Was $7000.
Appears solid.
“1954 Willys CJ3B 4×4 2nd year with the Hurricane, overhead valve motor. It has the flat fenders and taller hood. The previous owner had the motor rebuilt and the body is good. It has new seat covers, new water pump, electronic ignition, electric fuel pump, lock-out hubs and good tires.
There are seat belts for 4 and it’s street legal.
Could be restored, hot rodded or driven as is.”
UPDATE: UPDATE: **SOLD** Was $1500.
Price dropped to $1500. Might be a good price if the body is solid.
This has a bobcat hood and looks to be extended similar to CJ-2As. It wouldn’t surprise me to learn that this was originally a Washington State jeep.
“1948 Willys Jeep, V8 Ford 351w, manual transmission, power steering, does not run – electrical problem
$2000 or best offer”
UPDATE II: Still Available.
UPDATE: This is actually the 2nd Oneida hardtop found with a flat fender in the Spokane area (other is here). Maybe someone was converting them at the Air Force Base west of Spokane?
This top surprised me. It has a date plate! It seems to be some kind of manufactured-for-the-military hardtop. It’s made by the Oneida Products Corp. out of Oneida, New York. The manufacture date is August 1951.
https://spokane.craigslist.org/pts/d/spokane-1950-willys-jeep/6975865560.html
“1953 willys jeep with military topper. Has plow currently on PTO driven winch. Original motor trans… runs great, clutch is out. Let me know your offers.”
UPDATE: **SOLD** Was $7500.
Has that unique bumper add-on shaped in a WO.
“For sale – 1948 Willys pickup. Truck runs and drives well and is recently Vermont inspected. Four wheel drive, 4 cylinder Willys Go Devil L head engine, 63HP, 6 volt electrical system, foot actuated push button start, 3 speed column shift, Timken rear axle, Warner T90 3 speed transmission. Patina paint and body. Many new mechanical parts, including wiring harness, clutch, brakes, water pump, hoses, thermostat, 6 volt battery and more. Rebuilt starter. Five new 700-16 vintage-style tires from Miller Tire. Includes many surviving, rarely seen features including functioning Marvel Inverse Oiler, WO front grill guard and kerosene emergency flare. Only selling because we have too many vehicles. $7,500 or best reasonable offer.”
No pics provided. It’s a project.
https://charlotte.craigslist.org/atq/d/kannapolis-1947-jeep-willys/6975745502.html
“I have a Willys that runs perfect It is off frame right now was going to do restoration then I got Sick
It has original trans rearend and Motor frame is in perfect condition tub needs some pan work and
paint Need Gone I can send pics through my Phone”
It’s a project.
https://winchester.craigslist.org/pts/d/berryville-1948-jeep-cj2a-project/6974212041.html
“1948 Willys CJ2A project with VA title.
Rebuilt 134F with Supersonic head
New “corrected” body tub, fenders, windshield frame.
Rebuilt front axle.
Sandblasted and painted frame.
Lots of new parts in boxes, transmission and transfer case still need to be rebuilt.
Some assembly required.
I also have the original body, it’s a “Lefty” only made a couple months.”
Maybe someone can use these parts.
https://winstonsalem.craigslist.org/pts/d/lewisville-1952-cj3a-part-out/6975890293.html
“1952 CJ3A part out. Rear axle drivers side axle shaft is sold and hub/ drum is sold. Everything else in pictures is available.
Dana 18 transfer case- $175
L-134 Engine-rough- $250
Bellhousing- $50
Body- only bad spot is in the bed- $250
Frame- very straight – $250
Front axle- needs rebuilt- $100
Rear axle minus axle shaft/hub- $50
Rear driveshaft- $50
Steering column- $50
Windshield- glass is pretty good- $150
Hood- $50
Everything is OBO. Text or email for parts not listed.”
This is an unusual project. Maybe it’s a swamp rig?
https://miami.craigslist.org/brw/cto/d/fort-lauderdale-jeep-willys-1953/6968641698.html
“I HAVE A 1953 JEEP WILLYS READY TO WORK OR PROJECT HAVE NO TIME TO DO THE PROJECT WITH IT AND I HAVE THE SHAFT NO TIME TO PUT IT ON
BUT YOU HAVE TO SEE IT IF YOU KNOW ABOUT JEEP WILLYS
ENGINE CLEAN AND START ONE TURN TRANSMISSION PERFECT 3 SPEED GOOD TIRES
4 CYLINDERS”
UPDATE: Price dropped to $500.
May have some value.
https://louisville.craigslist.org/cto/d/new-albany-1953-jeep-willys-3a/6970466083.html
“4×4 Needs restoration. Thought someone might want to restore. No title. I was told run but have not heard myself. Tub is rough but frame is good”
UPDATE: **SOLD** Was No Price
This lacks a title.
“I have a jeep FC 170 that I picked up with the intention of giving new life.
Sadly, too much life and too many projects have thwarted my intentions.
It was in rough shape when I got it and I haven’t touched it since I unloaded it some years ago. It is a serious undertaking if you were to try to bring this back to life, lots of rust and I don’t believe the engine is reusable though I don’t know that for certain.
I’d like to try to find it a home where it gets some sort of use before its no good to anyone. I wish I had been able to get to it myself.
I’m not sure on the value honestly. That is something I would happily discuss with a seriously interested party. They are tough to find but this one is rough, sadly.
I don’t have a title. It would come with a Bill of Sale, in NH, ME that and a vin verification are all that’s needed to reg to it wasn’t a problem for me. It looks like it was last registered in 2005 in VT.
I’m happy to answer questions but seeing it in person is going to give you the most info I think.
Thanks.”
It’s a project. Engine is stuck.
https://richmond.craigslist.org/cto/d/mechanicsville-1948-willys-jeep/6974376859.html
“1948 Willy’s Jeep
90% of original parts
Has been barn stored for 35 years
Body is only setting on the frame
Steering box needs new bearings
Rear drive shaft is disconnected as there is something locked in the engine
There are no brakes
Engine is stuck
Have a Virginia Title in hand
Asking $2,500.00 OBO”
UPDATE: Price dropped to $6500.
https://wilmington.craigslist.org/cto/d/southport-willys-cj-3a/6964807966.html
“Willys CJ3A / M38 Jeep. Runs and drives. NEW: tires, seats, seat frames, 12volt conversion, carburetor, distributer, shocks, wiring harness, gauges, exhaust, fuel pump, fuel tank and more. Original Go Devil engine. Needs some body work, but frame is solid.
Sorry, but gun is not included.”
Blaine shared Jeep’s take on the history of the jeep. Of course, the company continues to ignore the importance of Bantam and Ford’s role in the origination of the jeep. One of the odd decisions was to select a photo of a 5 lug DJ-3A as representative of the DJ-3A. The history does include a mention of the DJ-5s and CJ-6s, so that’s good to see.
Also, a blurb about the CJ-6 claims the running gear was heavier duty, but as far as I know, the CJ-6 used the Dana 27 and Dana 44. Am I correct on that?
https://www.jeep.com/history.html
This may need a new starter. It has a rear PTO setup.
https://www.facebook.com/marketplace/item/2643851938967476/
“1946 Jeep Willy’s. In impeccable shape! 4 wheel drive with PTO. Manual stick shift, 4 speed, Ran great but we think the starter just went out. All new vinyl top with no rips or tears. Tires are in great shape! Drop down windshield. We are downsizing and selling our toys”
UPDATE: **SOLD** Was $5000.
Looks in good shape.
“Runs and drives. New metal,seats,gas tank,speakers. 6v system converted to 12. All else stock flat 4. No trades/holds cash takes it. Clean title.”
Runs and drives.
https://kalispell.craigslist.org/cto/d/somers-1946-willys-cj2a/6972585215.html
“I have a 1946 willys cj2a. It has been completely gone through and repainted 3 years ago.”
UPDATE: **SOLD** Was No Price.
Looks good from a distance. No up close pics provided.
“Looking to sell, 1943 MB, frame off restoration in ’08-09 and repainted to early war last year(3k miles). Center, step mount and pintil go with it along with the BC620 radio (Modern ham inside) Windshield cover and custom trailer-able full cover. Monument Colorado.”
Seems like there’s value here. No description provided.
UPDATE: Still Available. Pics now provided. No description provided. It’s being sold by Big Sky Auto Wholesale.