Runs. Has a 3B windshield.
https://pueblo.craigslist.org/pts/d/romeo-1947-jeep-willys-cj2a/6953967193.html
“For sale, sold on bill of sale. Lots of patina, runs great doesn’t smoke. 4×4 works great”
Runs. Has a 3B windshield.
https://pueblo.craigslist.org/pts/d/romeo-1947-jeep-willys-cj2a/6953967193.html
“For sale, sold on bill of sale. Lots of patina, runs great doesn’t smoke. 4×4 works great”
These re only the side panels and doors. These could be handy if you have the remaining hardtop parts. This should fit a Sears/Allstate half-top.
https://pueblo.craigslist.org/pts/d/florence-1946-willys-jeep-stuff/6978795356.html
“1946 WILLYS JEEP CJ2A PARTS.
2 DOORS WITH GLASS AND 2 SIDE PANELS OFF OF A HALF CAB.
IF YOU NEED THEM MAKE A OFFER.”
UPDATE: **SOLD** Was $7500.
Has a problem with 3rd gear, but still looks like it might be a good price. According to one Facebooker, it may already be sold.
“This is a solid old Jeep Runs & drives decent New tires Trans not shifting into 3 rd gear”
This auction ends in two days. The auction is only for this former Whole Food’s FJ. The matching trailer is being auctioned separately.
“With bench seat, automatic transmission, reads 26,533 miles, external power plug, potable water and catering window
Food service equipment contents will be sold separately in lots 635-637 and the matching trailer will be sold separately in lot 638”
Updates will resume Wednesday.
These two two-page brochures from the Venture Manufacturing and Implement Company appeared in an early Willys-Overland Equipment Book. One advertises a “spiketooth” harrow, while the other advertises a “springtooth” harrow.
The Spiketooth Harrow:
Might be a good price.
https://seattle.craigslist.org/kit/cto/d/keyport-m38a1-jeep/6972804389.html
“1953 Jeep Good condition. 5 new tires , battery, carburetor, brakes , paint, 12 volt alternator, exhaust.”
DOD 1/14/42. Plates are in pretty good shape, but they are installed on a glove box door. MB 111050 with DOD of 1/13/42 is a non-glove box slat grille. It’s therefore very possible the plates on the jeep below were originally on a different jeep (or body). Includes a Bobcat hood.
https://kpr.craigslist.org/cto/d/dayton-1941-willy-jeep/6978317861.html.
“Project-Buick V-6 stock running gear,3 speed motor runs great. All parts go”
UPDATE: **SOLD** Was $3800.
The bed has some rust.
“For Sale is a 1959 Willys Jeep FC170. The truck has a flathead Hurricane straight 6. The drivetrain is all there, but the engine is locked up and is not feasible to get running without a total rebuild. The truck would make a great engine swap candidate. There is some rust in the normal spots but is all very fixable. The frame is near perfect.
There is body damage, as shown in the pictures and the windshield needs to be replaced. It has a good title.
These trucks are getting hard to find. This is a project truck and a really solid starting point.”
UPDATE: **SOLD** Was Make Offer.
Not running.
“1961 Forward Control Willy’s Jeep. Currently not running. Has some rust and dings. 94,350 miles on it, V8 engine. Make offer.”
Lots of mods on this unusual build.
https://sfbay.craigslist.org/nby/cto/d/larkspur-1954-willys-wagon-for-sale/6957916136.html
“I purchased this car in the late 1960,s. It’s been a project over the last 50 years. There is over $40k invested. Many new parts are installed & included. The Willys runs and the engine is strong. I have original Pink Slip for origional Willys, but wagon is a make up of many different cars.
It is has been chopped 8 inches, has shaved doors, has frenched tail lights, grill has been flipped, front fenders filled to change look, rear wheel wells have had front fender trims welded to body. The body has been professionally welded to the frame. Bodywork professionally repaired.
The Willys sits on a 1986 Buick Regal frame. The donor drive train is a 1990+/- Camaro IROC with 63,000 miles. The motor is a 305 IROC motor with a mild cam with many custom parts added. The transmission from the same car and is a 700R . Many new parts added to the engine & suspension.
• Custom Shop Auto Meter gages
• K-Source VSS back up camera kit with flush camera
• B&M council mega shifter
• New front Willys badge
• New brakes, rotors, calipers, drop spinals
• Rear drum brakes converted to disks
• 7” dual chrome booster
• Sway bars, bushings
• High AMP 220 alternator and belt tensioner
• Polished aluminum water pump
• Polished aluminum finned oil pan
• Polished aluminum finned transmission pan
• Speedway polished finned aluminum valve covers
• Speedway hugger ceramic headers with professional installed dual exhaust
• Demon 600 to 700CF carburetor
• New midrise aluminum intake
• MSD Billet 8365 CB Pro Built with Accel pro sleeve large plus wires
• Kerr Plating in Phoenix did $1,300 of plating to special interior and exterior parts.
• T/A Performance Lo Profile differential plate
• Yogis hose kit
• New wiring harness
• Vintage Slim line under dash heater and AC
• Vintage condenser and hose kit
• Kenwood stereo, JBL speakers, JBL speaker grills
• Rock Valley bumpers from a 1934 Ford for front and rear
• Pop Works window kit
• Pop Works auto locks
• 2004 Mini Copper interior front and back seats”
UPDATE: **SOLD** Was $400.
This appears to have most of the elements of a Porter & Reed hardtop, except that the rear of the top is rounded. This feels like a transitional top between what was Porter & Reed and whomever purchased the company (if any one did). Early Koenig tops were similar to this, so perhaps Koenig (out of Texas) purchased Porter & Reed (out of Kansas)??
“Complete aluminum hardtop and doors for a Willy’s CJ 2A Jeep. May fit other models.
The Jeep in the pictures is not for sale. Those pictures are just for reference.
I’m unsure of the actual value so make me a reasonable offer.”
Tom’s got these parts for sale. Email him at tccwworks @ gmail.com for more info (remove spaces around the @)
UPDATE: Still Available.
(08/15/2019) Has some updates. Looks solid.
https://sfbay.craigslist.org/nby/cto/d/hopland-1952-willys-m38/6970139207.html
“1952 M38. Buick V6, 4 speed, Dana 18 transfer case with overdrive, Dana 25/44 axles, brand new tires, full soft top, bikini top, heater, rear rack. This little Jeep is in excellent shape and ready to drive anywhere. It has no problem cruising down the highway”
UPDATE: Price dropped to $9500.
(11/14/2018) Has updates.
https://medford.craigslist.org/cto/d/medford-1942-willys-jeep-ready-to-roll/6978242726.html
“Powerful V-6 Buick Motor Conversion done right. Aluminum Radiator, Electric Fan, Doors not shown but included. Oversize Cleat Type Tires, 2 extra gas tanks. Towbar and extra hitch. Road Light Bar. Personal Jeep owned many years by a particular owner. This is a rare early production model built in 1942 by Willys for government issue. Painted in Navy Gray, recently serviced and needing nothing to drive away!”
UPDATE **SOLD** Was $4700.
(07/25/2019) It’s an interesting mix of parts. I can’t remember seeing another Jeepster on a jaguar chassis.
“1948’ Willy’s jeepster, Chevy 350, with turbo 350 trans, on jaguar chassis, runs and drives, needs some work finishing up things, but mostly all there. With a little work would be a really cool hot rod.just don’t have the time. $5,500”
UPDATE: Price dropped to $350.
Various parts. Seller wants to sell as a lot.
https://slo.craigslist.org/pts/d/paso-robles-1946-willys-jeep-parts/6943743121.html
“No title, body rusted out, good full length aluminium side panels, Willy’s hood,fenders, diff Dana 41, t-90 trans (apart) misc other parts. $500 make offer all I can say is no. Selling as package. No scammers, time wasters,I don’t need help selling.”
This has a WWII frame. Has a lot of mods.
https://seattle.craigslist.org/sno/pts/d/everett-1945-willys-mb-ford-gpw-jeep/6977393685.html
“Titled as a 1945 Ford GPW. 300.00 minus wheels”
Dan Devries’ FC Jamboree is happening this weekend in Lake Mills, Iowa. Here are some pics from Dan along with some pics from Dave.
This unusual build appears to be a kids’ ride-on toy.
https://www.facebook.com/marketplace/item/347361319295335/
“This is one bad to the Bone custom built pull wagons built by the one and only radio flyer wagon “Pete”. This is a must see!! Unbelievable build by Pete”
UPDATE: **SOLD** Was $12,000.
Has a few mods. Looks in good shape.
“Ground up restoration. Fiberglass body, Stainless Steel windshield. Rebuilt engine. Custom made gas tank. Excellent condition”
Has an extra tub and more.
https://www.facebook.com/marketplace/item/737625053364666/
“1946 Willy’s Jeep project all original, with 4 cyl and title. Also another with Chevy 350 and another tub. All together can make 1 or 2 nice jeeps”
Looks like a good project. It lacks an engine.
https://www.facebook.com/marketplace/item/522727621833632/
“1960 Willys CJ3 Jeep $3000 It does not have an engine.”
Has lots of updates. It’s being sold by a dealership.
https://www.facebook.com/marketplace/item/481945069203438/
“The ultimate off road Jeep with style and character. Features a crate 4.3L V6 Chevrolet engine, Turbo 350 automatic transmission with Art Carr shifter. The exterior is Green with full roll bars, Dana 60 axles, 5:38 gears, ARB lockers, Warn hubs, on board CO-2, Warn winch, full hydro steering, King front coil overs, Bilstein rear shocks, Crane differential covers, full tube frame and atlas twin stick CTM U-Joints. The interior includes Black race seats with over the shoulder harness’, aftermarket CD, full Auto Meter gauges and ready to crawl!”
Has some updates.
https://www.facebook.com/marketplace/item/440684149870729/
“1947 Willys jeep CJ2A 1.T90 transmission,Dana 18 transfer case 2.1971 Ford 2.0L motor with a Novack trans adapter 3. 30×44 narrowtrac axles, 10×2 drums and shoes all around 4. Road legal and registered, I drive it around town 5. New kingpins,tie rod ends and linkage,bellcrank kit,and worm gear along with steering wheel 6. Selling so to pay off some other projects 7. Tires should be replaced, I drive around with them but have cracks 8. Will send pics to ppl really interested..No ridiculous lowballing”