This four-page August 1956 issue includes a mention of the hydro-vac, noting that on vehicles with fresh-air vents that the unit should be mounted on the driver’s side fender.
Military Vehicle Auction Minot, ND Opens August 28th
UPDATE: Here’s a video that goes through a variety of the vehicles up for auction:
==============================
This Seffes Auctioneers estate auction is for the Ken Yuly Military Vehicle collection. There are quite a few different jeep vehicles. There are MBs, GPWs, M-151s, M-170s, M-38s, M-274s, CJ-2A, trailers, parts, military Dodges, and more.
1970 Roof Palomino Mower Bangor, PA $8000
Bill shared this rare Roof Palomino with the mower bed.
https://barnfinds.com/wp-content/uploads/2024/09/083124-1970-Roof-Palomino-Lawn-Mower-ad.jpg
“Rare 1970 Roof Palomino two seater riding
mower. Only 300 were produced from 1968 -1970 this is one of the last 30 produced with a
Hi / Lo hydrostatic transmission. The Roof Palomino is original paint except for
the wheels. The Palomino runs and drives has working headlights and overall in good condition. Very
unique piece. Price $8000 or trade for 30+ hp 4×4 tractor with brush hog will ad cash depending what you have.”
1951 CJ-3A Valentine APU Des Moines, IA $8000
Here’s a very rare CJ-3A Valentine-Modified APU.
https://www.facebook.com/groups/837017479769475/permalink/2872363476234855/
“It is with much sadness that I post this unique gal for sale.
What do I have: replacement title says ‘44 but I don’t think that’s right. I believe that she is a 1951 CJ-3A and NOT a WW2 Jeep. I believe it is one of 75 jeeps that the Valentine Weldong Company converted for use as a Navy APU. The hole in the dash along with a few holes where their badge would go and the hood bump leads me to this conclusion. I have no proof of this, just what the evidence seems to indicate.
Engine: She does have the F4-134 engine that was put into the Navy APUs along with a very well done hood bump to create the additional clearance. Runs great and clean if you drive her often. Did spit some smoke at startup recently after sitting for a couple months but cleared right up.
4-wheel drive: is operational, Continue reading
1978 Bobcat Jeep Eugene, OR $37,000
Here’s an odd jeep that appears to have a Bobcat fiberglass body as it’s base, though it’s been modified.
https://www.facebook.com/marketplace/item/827087126073714
“-FULL FIBERGLASS BODY
-CUSTOM BUILT HOOD
-FRAME MODIFIED AND STIFFENED
-$30,000 GM PERFORMANCE ZZ572/720R DYNOED @ 620 HORSEPOWER, 685 FOOT POUND TORQUE MOTOR
-CUSTOM BUILT TH400
-HEAVY DUTY TRANSMISSION COOLER
-ATLAS TWIN STICK TRANSFER CASE
-CURRY ENTERPRISES CUSTOM FORD 9” REAT AXLE HOUSING & DIFFERENTIAL WITH LOCKER
-CURRY ENTERPRISES DANA 44 FRONT AXLE HOUSING WITH DIFFERENTIAL W/ LOCKER & 1 TON INNER AND OUTER COMPONENTS
-CUSTOM OFF ROAD SUSPENSION
-CUSTOM “IDIDIT” STEERING COLUMN
– AUTO METER GAUGES
-FULL ROLL CAGE
-HIGH OUTPUT ALTERNATOR
-2 PASS RON DAVIS RACING RADIATOR
-CUSTOM FAN/RADIATOR SHROUD
-ELECTRICAL/MECHANICAL FANS
-CUSTOM HEADERS AND FULL EXHAUST
-FRONT AND REAR SMITTY BUILT TUBE BUMPERS
-CUSTOM BUILT WIRING HARNESS
-CUSTOM ELECTRIC ENTRY/EXIT STEP”
1951 CJ-3A Kingman, AZ $4990
This one has some good updates.
https://www.facebook.com/commerce/listing/798947582311481
“1951 Willys Jeep CJ3 107500 miles 4WD Dauntess V6 3speed Manaul Headers Daul Exhaust New Tires New Paint New Battery Large Rack forBack of Jeep. Solid Real Solid No Rust Call for questions 9287167865”
1942 GPW Modesto, CA $9000
Looks in good shape. If the engine is a V8, you might want to check the frame for twisting. Those MB/GPW stock frames didn’t have the strongest metal.
https://www.facebook.com/groups/247270289549336/permalink/1574183750191310/
“42 ford 9k clean Title 42 ford modesto ca 327 chevy geardriven 4spd munsi and 4×4 still works”
1959 Wagon Port Townsend, WA $8500
This may be worth a look. Thanks to TJ for sharing it.
https://www.facebook.com/marketplace/item/7977073192347218
“1959 jeep Willy’s wagon 4×4 hunter package. Has a 302 with 3 speed trans. Brand new 35 mud tires. Very little rust but that’s to be expected for as old as it is. Don’t want to sell but have other things that need my attention. Price is obo partial trades may be considered.”
1957? DJ-3A? Somerset, KY $7500
Based on the year and the grille, this may have been a DJ-3A.
https://www.facebook.com/marketplace/item/1048100300276068
“Wicked Willy’s has a Cammed Small block Chevy engine. This thing is straight nasty torque and it will fly. As seen in one pic just put slicks on it and it will pack the wheels. It is also a beast on the street. If you wanna just cruise or go to shows you will get noticed every time. It is street legal and has a title. It is for sale or trade just message or call 60six70six008four.”
Year? Custom CJ-5 Project Woodburn, OR $3500
It’s unclear to me just how much value is here, but maybe someone can use this one.
https://portland.craigslist.org/clc/pts/d/woodburn-jeep-project-parts/7774270673.html
“This was ment to be a pick up and would be a cool finished vehicle. Working out of state has made it impossible for the owner to finish. The cab and chassis has a used v6 engine, front and rear end. The trans. is a 350 turbo rebuilt with truck internals. The transfer case is a Dana 300 rebuilt. The springs are new. The wheels and tires are used,. . Two pallets of misc. parts . Selling as parts/ project w/ title.
I would like to sell as a package, but may consider offers as parts. $ 3500.00 OBO.
Questions or to purchase please contact through CL.”