Looks in good shape.
https://www.facebook.com/marketplace/item/2886376368067956/
“1981 VWVeep CJ3 Jeep with 1600 cc VW motor Runs Great”
Looks in good shape.
https://www.facebook.com/marketplace/item/2886376368067956/
“1981 VWVeep CJ3 Jeep with 1600 cc VW motor Runs Great”
If I understand correctly, it’s a diesel that’s been converted to running oil? Or, it includes a kit to make that possible?
https://www.facebook.com/marketplace/item/280790956427340/
“jeep season, need to sell my cj10 $ 5000 wt oil conversion, run for free”
Looks solid. The front frame rails have been rebuilt. It may have Husky or Allstate hubs.
https://www.facebook.com/marketplace/item/280253749780084/
“Completely rebuilt. Many new parts. New tires.”
Listed as a DRW, it looks more like an FC-170 with dually adapters. Yet, it does have the correct DRW speedometer.
https://www.facebook.com/marketplace/item/816402585551224/
“For sale 1960 FC 170 DRW. I bought this just the way it is. I got the 226 Super Hurricane unsiezed and I am starting the restoration. It has the add-a-wheel type dually setup that allows the same wheels to be used all around. This includes a clear TN title, and extra frame with an automatic transmission and transfer case.
The price will go up as more of it gets completed. I am updating my ad to show the progress to this point. I have all new gaskets for engine, hoses and belts, fuel tank with sending unit and line for the fuel and brakes, mounts for the engine and transfer case.
I ordered a windshield which should be here in a couple of weeks. I’ve got the engine cleaned up, painted and moving freely. I also cleaned up and painted some of the frame.”
UPDATE: **SOLD** Was $18,500.
(05/25/2019) Looks like a clean build. Note the windshield setup; looks well done.
“1948 Willys Jeep CJ2A
V6 225 odd fire
Everything rebuilt less than 2000 miles
Custom Top, Tow Bar, Chrome Rims, Goodyear, Racing Seats, 4 point harness”
UPDATE: Still Available.
(04/24/2020) Seller listed this as a “pre-1954 Kaiser Willys”, but I’d say it’s more likely a mid-to-late 1960s CJ-6.
https://www.facebook.com/marketplace/item/2641692526152725/
“Posting a Pre 1954 Kaiser Willys Jeep for a friend. It has the 20” stretched wheelbase. All original 4 cylinder Hurricane engine and transmission. Everything works including lights etc. rebuilt front hubs. New fuel pump. New alternator. New starter. Message if you have any questions, or Text [hidden information] before 6pm.”
UPDATE: Still Available.
(08/07/2018) Entry sides have been altered.
https://sacramento.craigslist.org/cto/d/orangevale-1948-willys-cj2a/7137622024.html
“1948 Willys CJ2a, total restoration (frame off). Every mechanical and electric system is new or rebuilt: steering, suspension, brakes, fuel, cooling and drive train. It has not been registered and used since the restoration was completed. The only conversion from original equipment is a dual reservoir master cylinder and dry element air filter. Please call with questions, but do not make an offer without looking at it. Clean title in hand. ”
UPDATE: **SOLD** Was $15,000.
Daniel shared this nice looking FC.
“This is a very nice 1965 jeep FC 170. It has had some minor rust repair and although it is not a professional paint job, looks good and is a great driver. The odometer reads 49,400 miles which I believe to be correct. It has its original six cylinder engine with the original transmission and transfer case. Mechanically, it is in good condition and starts, stops, and drives as it should.
Like the April issue, this issue includes a variety FC and Surrey images.
The March 1956 Issue of Popular Science included a small story of a CJ-2A with a Gutter-Vac installed. It was used in Washington, D.C.
UPDATE: Thanks to Mark we have some background information on the Turner Manufacturing Company: https://www.statesville.com/opinion/o-c-stonestreet-a-closer-look-at-mr-c-h-turner-and-turner-manufacturing-company/article_d376cc29-de76-591c-bcad-62e719909ca6.html.
I’ve also added to the post with some wood working equipment that was also offered by the Turner Manufacturing Company of Statesville, North Carolina.
The Turner company offered a variety of other wood options as well according to the Special Equipment brochure index:
As the original post indicated, Turner produced hay balers as well.
This turner hay baler has some similar elements, but isn’t example the same:
This is really cool … expensive, but cool. Thanks to Steve for sharing it with us.
View all the information on eBay
“This listing is for one Vintage EL JEBEL JEEP PATROL Denver Colorado License Plate Topper Attachment. It is in very good condition with original paint.”
UPDATE: **SOLD** Was $900.
Terry pointed out that the larger parking lights suggest this is more like a 1969. Per Colin, the “V4” engine is probably just a typo, as the V and F are near each other.
Here’s a really rare DJ-6 project at a good price.
“This is a very rare 2wd Jeep that has the original Hurricane V4 Engine. The starter is missing and it needs some wiring work done but the engine is not locked and should run. I was planning on slamming it to make it a one of a kind! Title has been lost but would not be hard to get one”
UPDATE: Price dropped to $8,000. Last listed in 2018.
https://sandiego.craigslist.org/esd/cto/d/1966-jeep-cj6/7136837048.html
(09/08/2016) Looks nice. Has a Meyer Hardtop.
“Very rare 1966 CJ6 with factory hard top. Super clean for it’s age! Stock V6 and 3 speed manual. A couple modifications. Could easily be take back to stock or modified for the ultimate offroader! I don’t carry my phone vary often so leave a message, text, or e-mail.
Spec. (overall vehicle mostly all stock)
• 225 V6 engine (Buick odd fire– factory installed)
• 3 speed manual trans (T86a)
• Transfercase (dana 18)
• Rear diff (dana 44)
• Front diff (dana 27)
• Factory hard top (extremely rare)
Continue reading
UPDATE: Still Available.
(05/06/2020) Looks in good shape. May have a replacement body given the unusual dash/gauge setup.
https://www.facebook.com/marketplace/item/777766206020667/
“Antique Jeep Willys has many original parts, including the engine. It was rebuilt in 2008 and been kept inside a garage ever since. It runs extremely well. Several of the parts were manufactured for WWII.”
UPDATE: **SOLD** Was For Trade.
Seller is looking to trade this modified Flattie for a Jeepster Commando.
“231, th350,d18, warn o.d”
UPDATE: **SOLD** Was $4000.
The seller is doing a Craigslist ‘auction’ of this Tug. The current price is $4000.
“For sale to highest bidder. Jeep CJ-10A used as an airport tug. Has Nissan diesel engine and runs, used very little. Never titled. Located at Rockingham County Shiloh Airport. Automatic transmission. More information about this model can be found by searching for Jeep CJ-10A on the internet.
VIN: 3VOTA24XXFM-0005
Must pick up. Sold as is, where is. Cash or certified check only.
Highest bid as of June 8 is $4,000. Please respond by email only. Bidders will be notified of highest bid by return email at the end of each day. Bidding will end on Sunday June 21, 2020. In case of identical high bids, the earliest time stamp will be honored.”
UPDATE: **SOLD** Was $250.
If you are close by, this might be worth a look to see if there is any value in this poorly modified creature.
“OLD JEEP ranch project—-USE YOUR IMAGINATION
Contents in bed (fenders& M37 hood) NOT included
NO engine(was Ford V8 flattie) exhaust manifolds there.
trans trans case and diffs there
gas tank there
MUST be trailered
I am cleaning up my property”
WAGONS:
TRUCKS:
This may be a CJ-3A.
https://www.facebook.com/marketplace/item/286689722377143/
“Runs great for year ! Body is shot ; frame looks very good for year. No brakes Oringal motor trans and front and rear is great shape. Awesome hydraulic pump system with plow set up goes with it”
UPDATE: **SOLD** Was $2000.
Looks solid.
“1982 AM General Mail Jeep. Runs and drives. 4 cylinder, A/T, 2WD. Could use a tune up and some TLC but overall good condition. Very rare right hand drive in good shape. Please feel free to contact with any questions.”
Has the early King-Seely 0-10 speedo. Could have restoration potential.
https://www.facebook.com/marketplace/item/293559965146502/
“Selling a 1955 Willys Jeep. All stock. Has motor and tranny. Comes with new soft top in box. Overdrive transfer case. Been sitting, doesn’t run, needs restoration. $3,500”
UPDATE: Still Available.
(03/30/2020) It appears to have a VEC body. I think that is an early Koenig top.
https://spokane.craigslist.org/pts/d/curlew-1940s-cj2a-parts/7170996692.html
“Willys Jeep CJ2A parts! Includes 1947 parts jeep with title and a good galvanized steel hard top. Parts also include 3 blocks, heads, cam shafts, and oil pans, miscellaneous oil filters, generators, and some transfer case parts and clutch housings. There are axles for the ’47. There are transmission parts, but none are complete.”
Matt’s selling these M-38 parts. You can email him directly at mpstratton66 @ gmail.com (no spaces around the @).
Here’s the body. As you can see, it’s missing the steps.
https://www.facebook.com/marketplace/item/889161208228309/
https://www.facebook.com/marketplace/item/299496947743666/
https://www.facebook.com/marketplace/item/718456625575022/
“I have multiple M38 Jeep parts for sale. I have a frame and running gear that has the following: Ford 302/C4 Trans with military transfercase with Hi/Lo. I believe its a Dana 44 in the rear and a Dana 30 in the front. (I don’t know the Dana series at all.) I also have an original M38 tub in beautiful shape. The frame to match, windshield, gas tank, 2 tailgates , grille with war headlights, and various other parts I will try and post them all but FB only allows ten photos at a time… I would like to sell it all together and would put it on a trailer and deliver for a small fuel fee.”