emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
I suspect neither one of these has been run much (or at all) over the last few years.
https://seattle.craigslist.org/see/cto/d/kent-2-jeeps/7145790452.html
“Death in the family forces sale of the following 2 jeeps. 1960 Willys Jeep, Buick V6, 4 speed. $5000 OBO. 1947 Willys Jeep, all original good shape. $8000 OBO.”
Has an f-head.
https://orangecounty.craigslist.org/cto/d/valyermo-willys-cj2a/7148563734.html
“Barn find as pictured. Engine ran well about 10 years ago but rear axle is locked up.”
UPDATE: Status unknown. Was listed at $16,500.
(11/14/2020) Looks in good shape.
“1973 Jeep CJ-6
40,035 Miles
* Throttle body Fuel injected AMC 304 V8
* 4 spd manual transmission
* Warn VR10,000 winch with remote
* ARB compressor and switches
* ARB rear locker
* 4.56 gearing
* BestTop full soft top and side panels with removable doors
* Power steering
* New optima cranking battery
* New stereo system. Pioneer deck, amp, sub, and speakers
* Locking center console
* Reupholstered seats
* Full roll cage”
UPDATE: Price dropped to $2000.
(06/05/2020) Not sure how much value is here.
https://spokane.craigslist.org/cto/d/coeur-alene-1951-willys-jeep/7150488080.html
“1951 willys Jeep 383 Small block chevy. 3 speed manual, runs, drives, and stops 4×4 works great, will go anywhere, super cool jeep with flip up windshield. Clean title in hand Transmission is old and from the 50’s, if I was going to keep it I’d put in an automatic. Twin stick transfer case. Tires don’t have much tread. It’s a loud mud Jeep and probably not street legal so don’t expect heated seats and cooled cup holders lol.”
UPDATE: Still Available.
(01/20/2020) This appears to be a 1950 CJ-3A with an MB/GPW body on it. It also has some Husky/Allstate hubs and what I think is a Con-Ferr rear bumper.
https://palmsprings.craigslist.org/cto/d/palm-desert-willys-jeep/7150831076.html
“Selling my Willy’s. It’s registered as a 1950 but I’m told it’s a 1942-46…
Very Low miles on Rebuilt engine.
Purrs like a sewing machine.
Very reliable.
Military tires.
New brakes, hoses etc
Original steering wheel
Wench works
Original spot lights work
Amazing gas mileage
Tough little jeep
4×4 works. Lo/Hi
White patina
Clean title
Original carb rebuilt
UPDATE: **SOLD** Was $5000.
(08/15/2018) Has an odd top. Includes a snow plow.
“1947 Willys Jeep. Buick V-6 motor. 3 Speed trans. 4 x 4. 8000 # winch. With snow plow, Selling together, will not separate.”
This October 16, 1960, article introduced the Redlands Geckos Jeep Club out of Redlands, Calfiornia.
UPDATE: This post now includes the full brochure, along with updated information about the company.
Wausau Iron Works, unsurprisingly, incorporated in Wausau, Wisconsin, as an offshoot of the Northern Boiler & Structural Iron Works out of Appleton. The founders launched Wausau in 1908 to build bridges (some of them here), but expanded into snow plows in 1923. During WWII, some of the company’s plows were turning to the military.
Oddly enough, there was an earlier “Wausau Iron Works” was founded by Ely Wright in 1874. It was the oldest industrial establishment in the city and supplied machinery for the early railroads and for sawmills in north and central Wisconsin. However, I could find no evidence it made snow plows.
This December 1948 Willys-Overland “4-Wheel-Drive Farm Vehicles” advertisement appeared in the Farm Journal.
It’s currently for sale on eBay
UPDATE II: Amy is wondering if anyone knows where this Jeepster is? It was last for sale in Vermont in November of 2018 …
Amy wrote, “It belonged to my grandfather. I was unable to buy it when he passed and to see it for sale again, it would mean the world to me to know where and if I can get it back. I spent my summers working on and going for drives in this car. It was my grandfather’s pride and joy. Please any information you have is appreciated.”
UPDATE: **Status Unknown** Was $9800.
(07/26/2018) I like it, though I’m not a fan of the digital speedometer.
“1949 Willys Jeepster with a ford flathead engine five speed transmission ford rear end Mustang two front end and rack and Pinion steering Front disc brakes runs great is a fun jeep to drive”
Scott alerted me to this ad. The M-38A1 owner lost his windshield while towing it.
https://willysforsale.com/ads/lost-windshield-from-willys-being-towed/
“Lost While Towing — Lost my M38A1 windshield from the trailer while towing between Burnet Texas and Mason Texas on Hwy 29. Reward”
Route where windshield was lost.
Looks like some nice work on what could be a former DJ-3A Convertible.
https://roseburg.craigslist.org/cto/d/roseburg-1961-willys-jeep-cj3a/7150909240.html
“Completely rebuilt, very clean and neat work, power steering, 4 wheel disc brakes, Chevy 327 with Angle milled vortec heads, steel roller rockers, Holley 650 Dual feed double pumper carb, Fuel regulator with gauge, Swing pedals, hydraulic clutch, center force clutch, Ford top loader 4 speed transmission, 2 stick Dana 20 transfer case, 44 rear differential with power lock, 30 front differential, 4.56 gears, aluminum radiator, electric fan, all new wiring, Autometer gauges, 6 point roll cage, RJS seatbelts, full top and Bimini top, C.B. Radio, tilt steering column, aluminum battery box, heater, less than 1000 miles on engine, runs strong. $15,000.00”
UPDATE: **SOLD** Was $5000.
(07/02/2020) Has a rebuilt engine and some new parts.
“1961 Willys CJ3B. It has a fresh engine, transmission and transfer case. Less than 5 miles on it.
F-134 Hurricane 4 cylinder engine 2.2, Over bored .030 pistons, .020 mains, .010 on the rods
Borg-Warner 3 Speed T-90 Transmission
Spicer / Dana 18 Transfer case
Dana 27 front axle
Dana 44 Rear axle
11 x 2 Drum brake upgrade
** Additional new parts**
New clutch and pressure plate and throw out bearing
Engine and Transmission mounts
One wire alternator conversion
Battery
New/reman Carter YF Carb
Fuel pump
Gas tank
Gas tank sending unit
Points, Condenser, Dist Cap and Rotor, Spark Plugs, Coil
Remote oil filter adapter
Turn signal switch
Headlight Switch
All the time consuming hard work has been done. It runs and drives, but needs a few more items serviced. (ie, axle pinion seals, speedo cable, etc..) Three extra boxes of parts, along with a Weber Carb, four aluminum wheels, and the original engine long block are included with it.”
UPDATE: **SOLD** Was $3500.
Was running recently.
“47 Jeep Willys with 77,577 miles on it. It was originally my college car here about 4 years ago. It ran when I parked it there but didn’t want to start when I turned it over here a day or two ago. I completely built the rear end, new starter, new carb, as well as purchased an alternator and mounting bracket for that as well. Rear seats are in better condition than the front seats. I have the old carb, old starter, as well as a spare tire and spare tire bracket. I am assuming someone who knows what they are doing could have this thing running within an hour.”
Has a variety of updates.
https://portland.craigslist.org/clc/cto/d/canby-1952-cj3a/7147823279.html
“1952 CJ3A long term project
Need to thin the herd
Rust free
Tuned port fuel injection 350 Chevy
W/300 TC ’44 Front end
W/ Warn Floater kit &
Disc Brakes
Full Cage
$6500.00”
No pics provided. This may be something or may be nothing …
https://eastoregon.craigslist.org/pts/d/burns-40-year-collection/7150559827.html
“Something for everyone. Hotroders, classics, orrigionals. I have frames,front ends,rear ends,transmitions, Engines,complete and partial bodies, for flat fender Willy’s, 55 through 59 Chevy and GMC, model a,early 30s ford, s10, 1040 Chevy pickup, 1933 Chevy car, running and driving 1956 Chevy suburban that has been hot rodded, restored 60s 12 ft. Camper to pull behind your classic, s10,orrigional running and driving 59 Willy’s pu Way to much to list it all. Call me to see if I have what you need.”
Looks like a good project body.
https://saltlakecity.craigslist.org/pts/d/salt-lake-city-jeep-52-willys-m38-body/7148438780.html
“1952 Willy’s Original M38 Body Tub. Has been sandblasted and stored inside. Needs repairs, don’t they all, Online seen them in worse shape for $1,500. These were made from 1950 to 1952 so pretty rare. The price is for cash. Also have a brand new M38 hood.
www.radjeeper.com
PARTS SOLD AS IS
MANY MORE FULL SIZE AND AND CJ JEEP PARTS AVAILABLE
INSTALLATION AVAILABLE
THE RAD JEEPER
JEEP PARTS
“Salty City’s Custom Jeep Shop””
UPDATE: Still Available.
(07/02/2020) Has potential.
https://www.facebook.com/marketplace/item/295594288101697/
“Its not perfect but in better shape than some ive come across. It does run and drive though I’ve only taken it short distances. Ive rewired it, lights work. All new brake lines and hoses, brake cylinders and master brake cylinder as well. I had the head off and lapped the valves, new Copper head gaskets and head bolts. I robbed the carb and gas tank from my other Willys and they come back off once this is sold. That said I have the original carb for this and it just needs to be either rebuilt or cleaned (kits are $45.00) and I have the original gas tank that can be fixed/repaired. (Actually have 2 repairable tanks) Best offer, no trades. Located just south of the Chrysler Tech Center in Auburn Hills Michigan 248-736-4972.”
Needs some work.
https://reno.craigslist.org/cto/d/bishop-1952-willys-cj3a-civilian-style/7150109526.html
“Do you want a project? Have you always wanted to own a piece of history? Now’s your chance!
All original parts included to complete this project. Engine has been completely overhauled and installed. New factory style wiring set in the box. New convertible top in the box. Transmission transfer case, front & rear differentials all work. Tires are not new but hold air well. You must pick-up before July 19th as we are moving out of state”
UPDATE: This rare Struck Mini-Beep hit the market, but only briefly as it quickly sold. It was $400.
Roger Martin spotted this Struck Mini-Beep project.
https://www.facebook.com/marketplace/item/576790182895969/
“Bought for project but want the garage space back. It’s a Struck Mini Beep painted John Deere Green. Includes a new torque converter, clutch, belt, chain, brake, tie rods, and a Roper mini jeep steering wheel. Needs steering sorted, brakes attached, and drivetrain finished. No hood or engine. Want this to go to a good home. Willing to pass on at cost: $400 firm”
UPDATE: Price dropped to $12,500.
(05/31/2020) This FC has been repowered.
https://spokane.craigslist.org/cto/d/coeur-alene-fc-jeep/7150018143.html
“58 FC 170 jeep 300 Ford six cylinder recent rebuild overdrive transmission 99% rust free good driverOr a excellent candidate for restoration”
UPDATE: **SOLD** Was $1500.
I can’t imagine this will last wrong. the Koenig top itself looks to be worth at least $500.
“1948 Jeep Willys CJ 2A with original hard top and doors . This is the dream project you have been looking for $1500. Obo. Clean title.”
UPDATE: **SOLD** Was $200.
Looks like a real good price. Jeep is not for sale.
“Koenig metal jeep top. This top came off of a 1959 willys CJ5. Good condition. All glass is good. I have the doors but are not in the pictures. The top is off and ready for pick up, It’s heavy. I got a lot of thumbs up when it was on the Willys, but I am going with the soft tops now. $200 obo. Jeep is not for sale. (don’t ask).”
This is one of the introductory brochures for the new 1/2 ton truck powered by the new Hurricane engine. It’s Form HTTMI-3CM-350, a form number I’ve yet to decode for any meaning. This folds out to roughly 11″x17″. Here’s another one of these on eBay at a good starting price.
This ad from United States Steel promotes the toughness of steel. Unclear where this ad was published.
View all the information on eBay
“Magazine ad size is approximately 8″X11″
Original advertisement, not a copy”
