emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
UPDATE: **SOLD** Was $2000.
This looks to be a sizable project.
“1945 Ford GPW project, I have ran the pink slip. Not not running and is partially disabled for inspection. $2000 would get you this good start to a Ford GPW (willys mb) jeep, I have a few parts that I gathered to complete build and will include. New ring and pinion with power lock for rear, drivers side rear corner and front frame section”
UPDATE: **Still Available**
(10272020) Appears solid.
https://redding.craigslist.org/snw/d/redding-1946-willys-jeep-cj2a/7229365832.html
“1946 Willy CJ2A rebuilt trans and transfer case, new starter and rebuilt carbonator, runs great, no rust, new leaf springs, new seats, roll bar, bikini top, good tires, converted to 12 volts system, gun rackets, good paint, off road lights, and high lift jack mounted on front bumper, all gages work, asking $8,000 or best offer.”
Updates resume on Friday.
The Meyer Snow Plow brochure includes a large section about the ElectroLift. Labeled form no. 3-163, the brochure is a standard paper side with a half-paper-sized section that folds out horizontally to reveal more details about the Electrolift. There is not date on this brochure, but I’d guess early 1960s.
Note that the left side of the back of this brochure is the same as the image above. It’s the right side that folds out.
These two two-page brochures from Meyer once again highlight the company’s snow plows.
This first brochure showcases the Meyer Angle Dozer and is dated July of 1962 and is form no. 3-114 (though on the backside it shows 3-114 R2, suggesting the backside may have been a 1st or 2nd revision):
This second one is an undated form no. 3-283, but given it includes a Jeepster Commando, it is likely from the late 1960s.:
UPDATE: The Herald-News of Passaic, NJ, published an image of a Ford GP going through its paces. Given the chained tires and other similarities, it appears this photo was likely taken at the same time as one published at the bottom of this post.
========================
Originally posted May 30, 2020, as part of this post: Here’s an article and a photo showing a couple Ford GPs being run hard, originally printed in the March 09, 1941, issue of the Battle Creek Enquirer:
UPDATE: Daniel commented below, “these are aluminum, they are new, they come painted OD green. the bolts are sealed in plastic bags. he claims they are in canada, but the items ship from a woman in India. I am thinking Mahindra. his ebay listing is misleading at best.”
So, these may be acceptable parts, but the seller isn’t clear that these originate in India.
============
These adapters look to be the type made by Vic Hickey. If so, the HICKEY name ought to be visible on them.
View all the information on eBay
“Willys DUAL Wheel Adapters MB GPW CJ2A agriculture jeep ww2 radio jeep.
These are old stock which has been refinished ,cleaned and painted. They are like New never used . There are no marking on adapters.
Set comes with 2 adapters, 5 left hand thread studs and 5 right hand studs.”
UPDATE: **SOLD** Was $19,000.
(08/10/2020) I you are an Eddie Arnold fan, this jeep might appeal to you. It appears to be a thorough rebuild, there have been a few updates, such as the brakes, 12 volts, radiator, and more.
“This cj3a has been fully restored. Every part has been addressed. Engine, Transmission, Transfer case, Front axle, Rear axle all have been rebuilt, All the rust in the body has been cut out and replaced, the body has been striped to bare metal, primed and repainted. The frame has been striped all cracks welded and some reinforcement added.
Many new parts including springs, hangers, rebuilt steering box and all the steering parts rebuilt or replaced. 11″ brakes on all four wheels, all new or rebuilt. All the gauges have been rebuilt. A brand new wiring harness has been installed and now it’s 12 volt. Turn signals have been added. The transmission has had an overdrive unit installed. The brake and clutch pedal have been rebuilt. The seats have all new springs and upholstery. This is as a brand new jeep.
This Jeep was bought new by country western music star and member of the Grand ol’ Opry, Eddie Arnold. He used this jeep on his farm for 30 years. I have loads of documentation, letters, titles, pictures and several signatures, he even signed the repair manual.”
Auction starts at $.99, but there is a reserve.
View all the information on eBay
“Up for auction is this 1961 Willys CJ3B Jeep.
This Jeep came from an elderly gentleman up in Montana and it was a hunting Jeep that was used by him on his ranch in Montana. This jeep was used for hunting Deer and coyotes on a regular basis.
Jeep Was sitting when we found it and it was stored inside of a tractor shed. We loaded this jeep up in the middle of a blizzard after driving 2 hours down a gravel road and then made the long trek home with her. We flushed out the fuel system, added new fuel lines, Coolant, and a fresh battery. We also did some adjustments to the timing and the points as well as the electrical under the dash to get it working. The jeep starts really great and the throttle and choke work as intended.
This jeep had a Pinto engine, but the seller still has the original block.
https://tricities.craigslist.org/atq/d/greeneville-1943-ford-jeep/7228244367.html
“It is a 1943 Ford Jeep. It currently has a Ford Pinto motor in it but I have the original flat head motor in the picture. I have a lot of extra parts that go with it such as a new gas tank.
I have driven it only a couple times and seems to run fine. It has been kept in my garage out of the elements.”
UPDATE: **SOLD** Was $5500.
Appears solid. It runs and drives, but could use brake work.
“Up for sale is one of the more rare military Jeeps. The last of the ‘Real Steel’ CJ’s, the CJ10a. Built as one of two models of the CJ10, this one was made for the US Air Force as a flightline tow tractor, or tug. There were about 2300 or so built, thus the rarity.
All steel body including the removable hardtop. The rear body is 3/16 and 1/4 inch plate steel as part of the traction weight. Additional traction weight is a 4 1/2 thick slab of steel in a pocket on the frame above the rear axle. Curb weight is around 5500 pounds.
If you need Jeepster parts, this might be a good option.
https://nh.craigslist.org/cto/d/hudson-willys-jeepsters/7232643889.html
“2 1050 Jeepsters. One parts car rusted alot. Other very restorable. Yellow car orig. Paint. Very nice nose grille and doors. Extra door and windshield frame. Yellow car 90% complete. Both have orig drive trains. Both have 3 spd column shift with overdrive. Yellow car has org 6 cyl. Both motors stuck. Lots of parts. 2 nice comlete top frames. Multiple sets of trim. Cool project.”
Seller has wagon and truck projects.
https://boise.craigslist.org/pts/d/emmett-willys-jeep/7228152204.html
“LOTS OF JEEPS -PICKUP,WAGONS,PANELS 1 CJ7 call for info should have what you need 47-62 willys too many cleaning up some with titles some without (THESE ARE ALL PROJECTS)”
Seller has other parts for sale, too.
https://louisville.craigslist.org/pts/d/henryville-willys-1948-cj2a/7231604485.html
“Willys 1948 CJ2A Tub and rolling chassis, comes with all the repair panels to repair body
Many other parts are also available”
UPDATE: Price dropped to $900.
(10/31/2020) This includes a wooden hardtop that’s not shown in the pics.
https://dubuque.craigslist.org/cto/d/cascade-price-reduced-vintage-1947/7229979034.html
“This is a 1947 Willys CJ2A Jeep I purchased to get parts that I needed. This was originally a well done upgraded Willys with a Chev V/8 with aftermarket front mount plate….., overdrive upgrade….., GM steering box…….front hub selectors…….and a Stewart Warner 160 mph speedometer !! (speedometer is not included in the sale). There was also a very well built ……almost cabinet maker quality…..wooden full top enclosure that has rotted away, but I have some of the pieces and hardware is someone was skilled and energetic enough to duplicate it.
Continue reading
UPDATE: Still Available.
(09/07/2020) Could be worth a look.
https://www.facebook.com/marketplace/item/344089303426319/
“Have top and lots of parts that go with it”
UPDATE: Prices dropped.
Scott’s got these parts for sale on Facebook:
UPDATE: **SOLD** Was $2000.
This is a VEC with the rear hubs and early windshield. Plus, it has a rear PTO. This should go fast at this price. No title. Serial number #11854.
“I am reposting this Jeep. I have been educated a little on what I have. I got VERY overwhelmed by the amount of messages I received after posting yesterday. For all of you that are going to come on here and say I should have gone with the first person who messaged me, I honestly couldn’t tell you who the hell messaged me first. I got so many at one time it was unreal. SO I do not have the title to this Jeep #30 1946 CJ-2A Willys I don’t know if this thing runs. It was a family members that we had to pay for to get it out of the shop when he passed. There are 2 rust spots in the floor inside the Jeep. Has PTO Must either come pick up or arrange to have it picked up and delivered.”
These two brochures offer optional equipment for Meyer snow plows. I’ve been unable to make sense of the Meyer brochure numbers.
Form No. 3-208 is a four page brochure that highlights optional equipment for Meyer snow plows.
This center section utilizes two pages:
This is the back page:
=====================
Form No. 3-217 is a one page brochure that highlights marker kits installed atop Meyer Snow plows to make them easier to see.
This ad is slightly larger than a postcard.
View all the information on ebay
1945 CANADIAN CANADA AD WWII PATRIOTIC WILLYS JEEP COMMANDOS MACHINE GUNS
100% ORIGINAL NOT A COPY OR REPRINT.
MEASURES ABOUT 5.5 X 6.5 INCHES
THIS ORIGINAL ITEM WOULD BE NICE TO FRAME
GOOD CONDITION.”
UPDATE: This auction has a buy it now price of $9. The last batch of pencils sold for $8 on eBay.
View all the information on ebay
“You are bidding on a group of 8 Willy’s Motors pencils Most are the same ..There is “Willy’s on the Move” .Also a couple ‘H’ pencils $4 Shipping”
(October 29th auction of Willys-Overland pencils: Continue reading
I’d guess this ad was published in a Canadian magazine?
View all the information on ebay
“1961 CANADIAN CANADA AD WILLYS OVERLAND GIANT JEEP PICKUP TRUCK.
MEASURES ABOUT 8 X 10 INCHES.”
Maury spotted this image of an early Warn dash sticker on a Gladiator that was posted to the EarlyCJ5.com website. Anyone have a better example of it?
http://www.earlycj5.com/xf_cj5/index.php?threads/warn-locking-hub-dash-sticker.144960/#post-1613141
This has any unusual extension setup along with shorter rear barm doors. Maybe a Koenig hardtop?
https://www.facebook.com/marketplace/item/2982722271947483
“I am sad to be posting this but here it is. This is a one of a kind Hardtop Jeep Willys CJ3A. It has 18,500 original miles and the motor was rebuilt at 15,826 in 2016 ($3000 of work that I have the paperwork for).
Shocks were replaced at 15,665 miles. It is converted to 12volt. Its got brake lights and blinkers. 4×4 high and low work perfectly. The hardtop is custom fitted and fabricated, they didn’t make these with hardtops back then. This is a one of one Jeep Willys with an awesome patina, it could be sanded and panted easily but I would say don’t do it, keep that patina alive.
Continue reading
