emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
This likely has a replacement body.
https://www.facebook.com/marketplace/item/595706599107192
“Classic up for sale runs and drives needs little work here and there. Come take a look.”
The gas tank and part of the driver’s side are missing.
https://www.facebook.com/marketplace/item/600784068621561
“M38 1952 no title Willy’s jeep $7500 No gas tank, using boat gas tank but it will run like that (Antenna with based not included)”
UPDATE: **SOLD** Was $4500.
This might be worth a look.
“1948 willys jeepster, convertible , 4 cylinder, 3 speed manual with over drive, good body floors and frame, garage kept, last owner purchased in 1966, not run in a couple years, has new front brakes, brakes need gone over before driving, engine turns over, (not running), has convertible top, frame work good, top canvas has hole, includes side curtains, engine was replaced at some point to a 1950/1951 ohv, engine rebuild done about 1,000 miles ago this would be a great ride with out alot of work. thank you for looking!! good pennsylvania title! titled as an antique !!”
This is a custom build that was originally an FC-150. Still plenty of work to do.
https://www.facebook.com/marketplace/item/760656202241114/
“I bought this Truck in the same condition as You see it in pics. Unfortunately I have to part with this gem. Here are some details from the previous owner that did all the work before I purchased it. 1961 FC-150 started a custom build. Most of the cab metal work is roughed in. Started building a work bed, most of framework is complete. Ford dually rear installed. It had a Ford 200 motor in it. It ran. Bolted to an FC transmission. Comes with it but not installed in the truck. I have over 2000.00 in material. I’m willing to eat al the labor time. I also have 2 good seats I’ll throw in. Also comes with the parts that have been taken out of the cab (dashboard, etc) No Doghouse. The Frame has been extended to accommodate for the custom bed and for the dually.”
This has some mods.
https://www.facebook.com/marketplace/item/6681274968558950
“Trade for daily driver truck or car Nice 46 Willy’s, runs great!”
UPDATE: **SOLD** Was $4000.
Listed as a 3B, this looks to be a CJ-3A with some mods. This is likely still a project.
“It’s a 1950 Willy’s . Has a hurricane motor in it . Changed to electronic distributor , has 12 volt battery . Needs the new alternator for 12volt. Needs new driver side door plan welded in . Motor runs . Front and rear diffs are welded . Carb has been rebuilt. New water pump , new coil , fully gone through brakes.”
UPDATE: Still Available. The owner made some stylistic changes since this was last listed.
I thought I had listed this previously, but I can’t find it.
https://www.facebook.com/marketplace/item/675607213800907
“Extended frame.468BB 177 procharger . New th350 . 9″ 410 posi .new brakes,tall shifter,carpet,door panels,u joints,tires, ect..turnkey w/build folder and clear title”
The warming weather has got me busy, but I was still able to get some progress on the firewall covers. Between a small sledge hammer and my big vice, I was able to bend the steel into shape.
Here are my templates.
Here’s an example of the steel. I was able to cut this out using my plasma cutter (Yeswelder 55DS). It was my first attempt at using it, but it worked pretty well.
Here’s it after bending.
The tabs need some adjusting. Otherwise ,these two covers should work fine.
This article popped up in a Fall 1942 issue of College Humor. I was able to find a copy on eBAY. As you can see, this features a Ford GP. We’ve seen a few of these pics in other magazines.
Maury shared this nice looking CJ-5 at a Bring-a-Trailer auction.
https://bringatrailer.com/listing/1967-jeep-cj-5-4/
“This 1967 Jeep CJ-5 is finished in white over black vinyl upholstery and powered by a 225ci Dauntless V6 mated to a three-speed manual transmission and a dual-range transfer case. It is equipped with a black soft top and doors, along with a roll bar, a Badlands winch, a spare tire carrier, a Hi-Lift jack, 16″ steel wheels, Warn manually locking front hubs, and a K&N air filter. The truck was acquired by the seller in November 2021, and subsequent work reportedly included rebuilding the cylinders heads and a valve job in addition to a refresh of the steering system and replacement of the water pump, fuel pump, and carburetor. This CJ-5 is now offered at no reserve with owner’s and service manuals, partial service records, and a clean Oregon title in the seller’s name.”