Nick Oxander found and shared these photos on Facebook. It appears this lightweight prototype was manufactured by the Valentine Welder & Manufacturing Company; yet, this same vehicle has been credited in other places, such as Hemmings and on eWillys, as the KEL Kaiser extra-light jeep. Anyone have an insight into this conundrum?
Marx Nellybelle Jeep with Pat, Dale and Bullet w/ Box on eBay
I don’t know what this is worth, but they have some good pics of this rarely seen Nellybelle Marx jeep and box. The eBay seller is asking $750.
View all the information on eBay
“Marx NellyBelle Willys Jeep ( car Truck) with Pat, Dale and Bullet. This listing is for a really nice condition Willys NellyBelle Metal Jeep with the Original Box. Also included is Pat Brady, Dale Evans , Bullet the Dog and one Hammer.”
2004 “Corveep” Build
Here’s a unique build that married a wrecked 2004 Corvette with a free 1968 Jeepster Commando. The builder calls it a “Corveep”. There’s a series of pics that document some of the challenges involved in marrying the two vehicles, including lengthening the Commando body.
1951 CJ-3A Lincolnton, NC $17,000
UPDATE: Price dropped to $15,000.
Mark spotted this nice 3A with a governor and a rear PTO unit.
https://charlotte.craigslist.org/cto/d/lincolnton51951-willys/7244625485.html
“Restored 1951 cj3a Willys jeep new paint and tires and wheels added recently has a factory pto 3rd owner has older top jeep looks new drives great”
1970 Jeep Wagoneer Abbeville, SC $12,500
Mark spotted this solid (especially for South Carolina) looking Jeep Wagoneer. I’m not sure about the price (haven’t followed these prices).
https://greenville.craigslist.org/cto/d/due-west-classic-jeep-wagoneer-1970/7242936569.html
“4WD automatic 350 v8. 64,565 original mileage. 1970 was the last year that Kaiser owned Jeep. This is a true classic. Driven daily and runs great! Original upholstery in good condition. Chrome in good condition.”
1947 CJ-2A Florence, WI $4500
Looks like it may have had some step work.
https://www.facebook.com/marketplace/item/883387682207598
“1947 Willy Jeep, runs as should…… perfect alternative vehicle for driving on ATV trails up north. $4500 obo. This vehicle/ATV is located in Florence County Wisconsin”
1947 CJ-2A Coeburn, VA $5500
Looks like there is body liner on the interior and exterior of the tub.
https://www.facebook.com/marketplace/item/1831045540393657
“I have a 47 willys jeep. Runs excellent. Recently put a new water pump on. Jeep has all new floors. The frame is excellent and has been coated. It’s a great vehicle and I hate to sell, but I start a new job in a few weeks. The seats are excellent as well, 4wd works”
1946 CJ-2A Rochester, MI $1600
Looks like this is a column shift 2A (probably 3XXXX serial number).
https://www.facebook.com/marketplace/item/2867974040139116
“1946 Willys 2a(Price dropped to $1600, the motor, trans and case are now sold) $1600. This has a Michigan title, in my name. The first pic is as got it and now disassembled. Its a project that I was going to build on, that said I have “to many projects” now so this one well be let go. The body is all there: tub, tail gate, front clip which includes front fenders, grille and hood and windshield frame. The frame and rolling chassis. The tub is very fixable. What looks solid is solid and whats looks rusty is. Replacement parts are available for these tubs from various venders and even made here in the USA. I do have seat frames, good shape. No radiator. Vin tages are the original ones, on the tub and frame and never been tampered with. Available till add deleted.”
DJ-3A Project/Parts Darlington, MD $600
UPDATE: Price dropped to $600.
(05/28/2020) Later model DJ-3A body.
https://www.facebook.com/marketplace/item/417261702732461
“Im selling my Jeep flat fender projects. -complete DJ3a body tub- sand blasted and epoxy primed-yes it has some bad areas in it but can be repaired. There is no filler in the tub so it is what you see. -Fenders -two hoods -tail gate -grill -CJ5 frame – very nice and solid -pair of CJ5 axles. $600 for all. Located in Darlington Md 21034”
1946 CJ-2A Muskegon, MI $5999
UPDATE: Still Available.
(11/03/2020) The front frame rails have been modified. The jeep will need some work.
https://www.facebook.com/marketplace/item/765288810952349/
“1946 cj2a jeep willys tires like new .rhino lined exterior and interior..runs and drives 4 cyl. flathead engine manual trans .shift on column .very rare only made for first 6 months of production .new brake lines master..shocks exhaust alternator.all rewired.turn signals and lights..new water pump .head gasket. Radiator.basically went thru.whole thing 2 years ago .runs good but need s valve seals .smokes.and has a little drivetrain noise been like that ever since I’ve owned it.has military canvas top and doors”
1948 CJ-2A Short Hills, NJ $12,500
UPDATE: Still Available.
(1011/2020) This has a replacement body.
https://www.facebook.com/marketplace/item/3443147255748261/
“1948 Jeep Willys CJ2A, civilian model. Restored and converted over 30 years ago as a military version. Top speed 40-45 MPH. Still features sidesteps, rear seat, PTO (power take offs), roll bar, full canvas top and doors, directionals and headlights. Turnkey vehicle. Fun vehicle for around town, beach, lake or farm-type property. Asking $12,500 or BO. PM me if interested.”
1963 Article on AZ Search and Rescue Meeting Fashion Show
The Maricopa County Jeep Posse held the 4th Annual National Jeep Search and Rescue convention in 1963. As part of the event, wives and daughters of the Maricopa County Jeep Posse planned to pose as models for a pool-side fashion show. They would model clothes from the Scottsdale Wigwam. I can’t speak for the Scottsdale outlet, but I am just old enough to remember our local Wigwam store and ‘fashionable’ isn’t a word I’d use to describe it. It was more like the precursor to the Dollar Store.
More 1960s Meyer Snow Plow Installation/Instructions
Below are there additional Meyer-related Installation, service and instruction documents. First is four-page Form No. I-318R for installation of Meyer Power Angling:
Next is Form No. 1-119R9 for installation of snow plow lifts powered in several different ways:
1945 Christmas Card w/ From Budapest, Hungary on eBay
Neat little unscripted and signed card with a jeep and Christmas tree from Hungary.
View all the information on eBay
“Original signed old Xmas card without envelope from Budapest 1945. Good condition, (please see scan). Dimensions are (folded): 108 X 155 mm.
I will send this item Worldwide. Shipping by registered Air-Mail only (Worldwide) is 4.20 $ for 1-3 Postcards.”
1953 CJ-7 Sandston, VA $16,000
Here’s an unusual build on a 1953 chassis.
https://www.facebook.com/marketplace/item/2793191420952248
“1953 Willis frame w/86 cj7 glass tub and one piece glass front end. Steel doors. Chevy 350 w/ aluminum heads nice cam aluminum intake and Holley 750. Turbo 400 trans w: ultra bell housing, dana300 transfer case. Model 20 rear axel , Dana front axel. Nice interior, am/fm/cd with amp and subwoofer. 39/18.5×15 Mickey Thomson Baja’s on aluminum wheels. This is not a show truck, it is super clean and built to drive. If it is listed it is still available. Will not respond to is it available”
1943 MB Claremont, NH No Price
Looks good, but does have some issues as Craig notes. It does not have the original body.
https://www.facebook.com/marketplace/item/173421741146605
“Listing my fully restored 1943 Willys MB. Purchased back in 2014 and performed a 100% restoration. Original running gear, but does have a new body on it. I’ve only driven 1100 since the restoration. Everything is 100% correct for the vehicle, I can give the interested party a complete run down on what has been done and an idea of the money invested into it. I do not need to sell it, but for the right price I will let it go to a new home. It’s currently in storage for the winter in a heated garage but is fully accessible should someone want to come purchase it. Please message me with your contact information and I will call and or text a reply. I will not be accepting off the cuff offers, and I’m not currently looking for any trades. In response to recent messages, this not a $10000 vehicle, I have over $27k invested and that is what I’m looking to get for it.”
1946 CJ-2A Haltom City, TX $6800
Driver’s side floor has been patched. Has some other minor mods.
https://www.facebook.com/marketplace/item/2443001599327545
“1946 CJ2A. Finished project. Great for hunting and off road. All components overhauled and ready to go.”
Year? Jeepster Emporia, KS $3500
Has rust, but runs.
https://www.facebook.com/commerce/listing/385811265865122
“Runs
New water pump and belt
New interior ready to install still needs a lot of work and does have rust”
1970 Suzuki LJ10 Erie, PA **SOLD**
UPDATE: **SOLD** Was No Price.
Here’s an unusual project. Body looks in great shape.
“1970 Suzuki lj10 with full 13b swap motor is ported and everything brand new inside can show proof PM more info”
1965 Land Rover Defender Hampstead, NH $5000
UPDATE: Still Available.
(11/10/2020) I’m not sure what this is worth, but may interest someone.
https://www.facebook.com/marketplace/item/1321775038189464
“1965 Land rover Series 2A complete orignal truck. Will need frame.”
1946 CJ-2A Tulsa, OK $5000
UPDATE: Still Available.
(11/12/2020) This jeep has undergone some modifications. The body has been cut in places and patched in others. Perhaps the most unusual aspect of this jeep is the hood (aftermarket?), which is mounted at an angle with the back up high, presumably to fit the Chevy 350.
https://tulsa.craigslist.org/cto/d/catoosa-1946-willys-jeep-cj-2a-350-swap/7238407879.html or https://www.facebook.com/marketplace/item/378148393278063
I am selling a very nice 1946 Jeep Willys-Overland CJ-2A, twin stick 4×4, manual, 3 speed. It has had a frame-off restoration. No rust on the cab. VERY STURDY, no rusted through portions. Nice, thick paint. The paint is pretty good overall, but has scratches and imperfections. The has been swapped for a Chevy 350 with true dual exhaust with cherry bombs (Sounds good, not obnoxiously loud). It starts easily, runs great, has tons of power, and drives well both offroad and street. The transmission was pulled from a CJ-2A 6 cylinder, and the remaining drive train and axles are all original to the vehicle. The passenger seat flips up. The windshield folds down. The lights work. Continue reading
1947 CJ-2A Branson, MO $14,000
UPDATE: Price dropped to $14,000.
(12/02/2020) The passenger side is missing the drain hole. This has a few other alterations as well.
https://www.facebook.com/marketplace/item/2602400120009316 or
https://springfield.craigslist.org/cto/d/reeds-spring-1947-jeep-willys-cj2a/7235507770.html
“Frame off restoration of this unique 1947 Willys World War II era classic. @ 95% original. Hurricane engine runs great. A definite show stopper and unique piece of history; it’s time for your chapter.”
1964 M-676 Lancaster, KY $3500
Rare M-676 for sale.
https://www.facebook.com/commerce/listing/724662921500666
“1964 fc170 jeep pickup. This is actually one of 64 ever made in a 2 door for the military. It’s a worthwhile project, no title. Everything needs attention but these models are extremely rare! No I don’t know if it runs. No I’m not interested in trades. Since it’s a military truck the sheet metal issues never bothered me because some easy riveted military style doubler plate repairs would just add character! I’ll clean it up this weekend and put it on ebay for the whole country to fight over so this week is your chance to get it before that happens! I hope to keep it if possible so no low balling! I haven’t tried to turn it over, I was planning on swapping in a newer v8. It has some old v8 in it, might be an international. I’ll get more pics tonight. I have equipment to help load it on your trailer.”
December 1945 Popular Science Jeep for Young GIs
There are two different project jeep designs described in the December 1945 issue of Popular Science, pages 162-166. The simpler one was designed by Herbert Pfister of New York City, while the second was designed by H. A. Machlan of El Campo, Texas.
1954 Photo Willys Project Engine eBay
Is this some kind of diesel engine? This photo comes with a second photo of a fluid cargo carrier.
View all the information on eBay
“Here I have a set of 2 Willys File Photos featuring:
* PROJ. 8511-01 T.C.P. Engine Number 14371 (1) Dated 5-28-54
* Fluid Cargo Carrier
Photos measure about 8 ½ x 11 inches including the borders and are punched. Punch holes do NOT affect the photos (See Scans).
Here’s the Fluid Cargo Carrier photo: