This was listed at only $5000. It sold within a few hours on Facebook. The seller has four more to sell (condition unknown) and a variety of FC parts.
https://www.facebook.com/groups/835668236472205/permalink/6825583574147278
This was listed at only $5000. It sold within a few hours on Facebook. The seller has four more to sell (condition unknown) and a variety of FC parts.
https://www.facebook.com/groups/835668236472205/permalink/6825583574147278
Originally white, this CJ-5 looks solid.
“This is a very nice 1962 Willys CJ5. Runs great, motor has been checked over and new rod and main bearings have been installed.
Steering box was rebuilt. Clutch is good, brakes are good. Body is in very good condition with just one small patch on the passenger side floor over a support channel (support channel has approx 3-4″ of rust). Interior of the tool box has some surface rust, no rust through. No frame issues.
Looks like original condition other than it was painted red over the original white, no modifications. Seats are in good condition, probably recovered in the past, no tears. New glove box insert. This would be an easy restoration or have fun with it as is.”
I’ve never heard of using Suzuki Sidekick brakes on a jeep.
https://www.facebook.com/groups/WillysSwapMeet/posts/3513741438899110/
“946 cj2a
Brakes have been completely redone with sidekick disc brakes up front
Rebuilt engine, with less than 500 miles
New aluminum radiator with electric fan
Gm alternator conversion
Approximately 17 gallon fuel tank that runs underneath both front seats
eBay mud terrains
Amazon wiring harness
The ebrake is missing
Needs shocks
Front wheel bearings need to be replaced
The carburetor is an old solex and not ideal but it runs
The windshield frame is in pretty bad shape
Brake lights don’t work
The t90 works, it doesn’t pop out of gear but it is worn out. Comes with rebuild kits and enough parts to rebuild it and build an extra t90
Comes with a ton of extra parts
Including steering column
Two extra Dana 18’s
Warn Saturn overdrive
All the parts to assemble a t90 plus rebuild the one in it
Water pump
Drive shafts and axle shafts
A set of rebuilt mb axles
An mb windshield
And some extra wheels that wouldn’t fit over the disk brakes
Comes with a complete mb band parking brake”
This FC only has a few hours left in the auction. As of Tuesday night the high bid was $4300.
“1958 Willy’s Jeep FC150 pickup truck
Miles: 29,998 on odometer
VIN: 6554815909
Engine
Cylinders: 4
Fuel type: Gas”
UPDATE: **SOLD** Was $500.
/Listed as a Meyers hardtop, this is actually a Koenig 555 Super Half Cab for the CJ-5.
“I got this Meyers half cab hard top for my ‘67 Jeep CJ5, but I am coming to the realization I will probably never get it cleaned up and on my Jeep. All glass is intact. Driver door is missing the hand crank. Would look great on a CJ6 as well. These are getting harder and harder to find for these old Jeeps. The last photo is what it would look like assembled. Located near the border of Riverton/Herriman, UT approx. 14000 South and 5200 West. Asking what I paid $500, but will consider offers.”
Seller has another parts top for sale, too.
https://www.facebook.com/marketplace/item/631299368409095
“Just surface rust. Was on a 1950s cj5. Erie PA 16510. All glass is plexiglass. I do have another CJ5 hard top for sale ( scrap ) but has the sides & rear Glass all intact. I’ll include if purchased.”
This might be worth a look depending on what “TLC” is needed. It sound like it might not be running. It has some early Free-Lock hubs.
https://www.facebook.com/marketplace/item/6171383709576241
“1963 Jeep Willys CJ5 with Koenig1/2 cab. Jeep will run. Needs some TLC. Fun little jeep.”
UPDATE: Correct pics now posted (thanks Allan).
The body has been modified and there seems to be some CJ DNA in that body.
https://www.facebook.com/marketplace/item/706849228123353/
“Hard to find Ford GPW jeep with all new floor huge tires 2 new aluminum gas tanks new spring leafs with ford 289 and transmission came out of running vehicle have some extra parts for engine”
Joe-in-Mesas shared this custom flattie.
https://www.facebook.com/marketplace/item/1481479402258412
“Willyzuk project. 47 cj2a/ 82 Suzuki samurai.”
UPDATE: Still Available.
(03/16/2023) This 3B is partially disassembled. The seller posted an early Kelly hardtop brochure as one of the pics, but he actually has a Kelly series 23 top produced in the 1960s. The TC is likely a Dana 18 (not Dana 41) and the diffs are likely Dana 25/44 (not 18/44).
https://www.facebook.com/marketplace/item/219552757299562
“1954 WILLYS CJ3B. ALL ORIGINAL! CLEAN TITLE! BARN FIND! This CJ3B only has 38,715 original miles? It was purchased for a ranch in Colorado and stayed in family. This CJ3B also had the option for the HARD TOP. All glass is original and intact. NO CRACKS. I began the project and cant finish. Motor runs fine and was running before I started to restore. I was going to keep it all original. F4-134 Hurricane 75 HP engine, T90 3 spd. trans, Dana 41 TC, Dana 18/44 diffs.
Grill is perfect and blasted ready for paint. Hood and fenders are blasted and can be repaired for dents, etc. Or you can buy new ones. Hood is also blasted. NEW tail gate. Original seats are reupholstered! The radiator has been rod cleaned and tested. Rust is all surface rust. Some rot in tool box. Could be repaired. Lots or new parts ready for restoration completion; NEW suspension, New gas tank and sending unit, NEW shocks, NEW Floor pans, NEW 6 volt battery, NEW tail light, NEW; Mirror and arm, Grill webbing, Clutch and brake pedal felt, Oil hose and filter, E Brake cable, Battery hold down, Accessory pedal boot, Light switch, Wood hood blocks, Brake adjustment cover, body mount, fuel line tubing.”