Bill Norris let me know that the new Holy Toledo calendars for 2024 are ready to sell. Go here to learn more: https://www.dispatchermagazine.com/calendars
1945 MB Grass Valley, CA $12,500
Mike shared this unique build. It’s got a 181 Mercruiser engine, which was one I was considering when I was building Biscuit. I wish I could take this for a test drive.
https://goldcountry.craigslist.org/cto/d/grass-valley-1945-willys-jeep/7664480067.html
“Complete rebuild 3 years ago
181 4 cylinder mercruiser engine
T90 transmission
New 33 inch tires
4 wheel disc breaks
Custom best top
8500 warn winch
Duel fuel tanks
Line x tub
New seats
Warn locking hubs
Roll cage
Heater
Waterproof radio
Electric windshield wipers
Millatery grill
Hi lift jack,axe,shovel
Tow bar”
The Good, The Bad and The Ugly
UPDATE: Solved the oil spillage issue. The oil was coming from the back of the engine where the oil gauge line attaches to the engine. I had made the hose a little too long, so it didn’t tighten down correctly. Trimming the line fixed the issue. So, I got to drive around the property yesterday instead of doing updates for today ….
=============
The good news: I rolled the racer out of the garage, put in some gas, and tried to start it. Naturally, it didn’t start straight away. After fiddling with it, finally figured out that the manual choke needed to be opened (the choke was never hooked up on the old racer, so I never thought about it). Once I adjusted the choke, the jeep started right up! So, I will be adding a choke cable.
Unfortunately, while looking for the starting problem, I ran my forehead into the tall air cleaner bolt. It was only a large scratch and some blood, so not that big of deal. I was more made than anything. This highlights the problem with the bubble in the eye; sometimes it screws with the depth perception.
The bad news: Once it started, it sounded as great as it did last year. However, for some reason the fuel pump didn’t stop pumping prior to starting the engine (that’s how I remember it working). This suggests to me that maybe something isn’t sealed correctly, so it’s not building the pressure needed to shut off the pump? I will have to research the pump to double check this. I’m sure the fix will be fairly simple.
The ugly news: The worst issue was underneath the jeep; I discovered that a significant amount of oil was leaking out the back of the engine. My guess is the rear main oil seal needs replacing. Ugh! It was fine when I parked it last summer (and this highlights the risk of “ran-when-parked” jeeps!). I’ll let it sit for a day or two and see if things magically right themselves.
That pretty much ended my garage time yesterday.
3 Dogs, 3 Rims and a Bonus
I have been wanting a set of 5 lug aluminum rims that match the six lug aluminum rims for the racer. Yesterday, while fuming about the oil leak, I went on FB Marketplace and did some searching for local motorhomes (pondering the idea of getting a gently used, older motorhome to take to races). After looking through ads, on a lark, I entered a search for Desert Dogs. Lo and Behold, these three popped up for sale for only $400! Check out all that barely used tread!
Even better, the dogs were mounted on the style of rims I had been seeking! I made arrangements to get them, which meant driving to Boise today.
It turns out they had been an extra part of a Suzuki Samarai purchase.As a bonus, they threw in another desert dog, though it doesn’t have much life left.
This rim has a little cosmetic discoloring and the tread is slightly different, but no bid deal. On the left you can see the other rims. The COOP tires on the green rims will be transferred to the other matching six lug aluminum rims that I have.
Demo or Counter Display Hubs For Dealers
UPDATE: This post originally highlighted Paul’s Warn hub counter display model. Now, this post will highlight several different demo or display hubs with sections removed for dealers. Anyone seen images of other examples?
1. Cutlas Selective Hub: You can see a brochure for this early Cutlas hub here. This was on eBay (last priced around $450), but sold away from eBay. See more pics of this here: https://www.ebay.com/itm/175866727203
2. Dualmatic 2-lever Watson-style Display Hub: This hub has a Dualmatic sticker, but is the type sold under the Watson brand (Watson-branded hubs & Dualmatic hub lever variations). This display hub was also on eBay, though I don’t remember the price. It probably sold off ebay as a package with the Cutlas hub above. See more pics here: https://www.ebay.com/itm/175866718846
Dana Spicer Hub/Lok Hubs
UPDATE: Unlike the other Hub Lok hubs made for jeeps, this Hub Lok hub model was designed for early Ford Broncos. It is listed for $149 on the Bronco Graveyard website. I can’t confirm if these are rare or not.
=================================
Originally posted on June 8, 2023: The seller of these Hub Lok hubs for jeeps sold the hubs with the original installation and operation instructions! The manual accompanying the hubs confirms that the Hub Lok hubs were sold by Dana and/or Spicer, which is what we thought, but lacked physical evidence as proof.
An original dash sticker? Probably not another one of these around!
Wood Top on Rescued Jeep
Jordi bought this CJ-2A with an interesting hardtop (the plates indicate this is a jeep outside the US) and posted pics to Facebook. To me, this top looks most like a Station Wagons, Inc, body. The suicide doors and certain elements are extremely close (especially in the Pop Mech ad), but not exact.
Popular Mechanics Ad from the January 1948 issue of Popular Mechanics, pg 266. This ad appeared in the February 1948 issue as well.
Fiberglass Jeep-looking Body for VW Chassis
Jason posted these pics of a jeep-looking fiberglass body with some unique aspects to Facebook. The hood is lower than usual vis-a-vis the fenders, the rear fender wells have a flare modeling into it, the rear mid-section looks slightly longer, it has a step with a runner along the entire side, and the rear has a unique flare on the back. Also, it is interesting that the top edge around the back is about as thick as a Bobcat or Parkette body.
According the discussion on Facebook, “I was told by the owner there was a local guy he in nh that was big into fiberglass I guess he also built cobra body’s and he made a few of these.” I suspect there aren’t many of these around.
Al-Toy 1-seat Jeep Seattle, WA **SOLD**
UPDATE: **SOLD** Was $50.
Some idiot put the wrong link in this post … fire him!
This is missing the windshield.
1947 CJ-2A Woodinville, WA $10,000
UPDATE: Price dropped to $10,000.
https://www.facebook.com/marketplace/item/2050470681961241
“47 Willys cj2a 289ci 4spd, has no rust, to many parts 2 list! I have all receipts.”