emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
UPDATE: **SOLD** Was $3500.
“1953 CJ3B Navy jeep. runs great everything works! Has front tow bar, original military soft top That I never put on. Jeep is very functional and a conversation piece”
UPDATE: Was $500. **SOLD**
Check out the rear end on this jeep. If that’s a modification, then when it was done, it was done nicely (now it’s a bit beat up). If that’s original, then it is rare! I’ve done some searches, but they haven’t yielded any suggestion that this is a production length….
“I am selling a 1949 willys jeep it was running last yaer and I was going to overhaul the moter just never got around to it this jeep is in great shape.
UPDATE: **SOLD** Was $5500
“4WD, 302 Mustang motor, new tires, new paint, all new electrical, new steering box, new glass, new tailgate, new bikini top, auto trans, needs new radiator.”
UPDATE: **SOLD** Was $550
It says it’s never been used, but it looks like the front clip was ready to be installed. If it is in as good as shape as advertised, then this is a great price.
“Willy’s Jeep CJ2A, CJ3A, or MB Fiberglass Tub with Steel Fenders, grill, & tailgate. It’s never been used, no cracks – good shape! Also has a fiberglass tailgate included. There is a frame included if you want it.”
UPDATE: **SOLD** Was $3500
“’47 Willys CJ2A, 2300 Pinto engine, T-90 3 speed, 8.75 Chrysler rear end, Warn Overdrive, Arctic hard top, 11″ Brakes, 16 gallon fuel tank $3,500.00 OBO”
It looks like a nice jeep. If it is really a 1949 CJ-2A (rather than a CJ-3A), than it’s one of only 2182 produced that year.
“1949 willys jeep cj2a 4wd 231 buick v6 3spd warn overdrive and twin stick transfer
35″ mickey thompsons dana 44 rear 27 front was fully restored 10 years ago still very nice , runs good no smoke needs clutch slave cyl to be a good driver 30$part. No rust, rhino lined inside, full cage, new seats,
gm column, nice top, (253) 208-3095 powerwall58@hotmail.com”
There’s been a number of changes to this CJ.
“1946 jeep willys buick 231 V-6 W/hei advanced adapters bell housing adapter t-90 transmision 3 speed modle 18 transfer case new 3 and 1/4th inch super lift kit new shackles half inch supper swampers 32×11.5 R15 new black widow rims please call 253-929-9489 Robert”
UPDATE: **SOLD** Was $2000
Is this that barn find you were hoping to run across? 31 years in the barn — no mention if it stills runs.
“49 willys all original,it has been stored in our barn since 1987 and I need the space, priced accordingly, $2000.”
This jeep’s body looks pretty straight. It looks like there is a muffler on the driver side, but none on the passenger side?
“I have a 1946 jeep willy’s. I bought it to restore and got too busy with work and family, I would like to sell it, great for hunting or wheeling. 231 Buick motor almost new top, runs great. fairly new tires power steering but needs new hose, has a new aluminum radiator has a few dents and dings. has aluminum fender well covers with rear seat attached. I am asking $3500 obo. Call Frank at 503 896 4773 leave message
or e mail tfalick@yahoo.com”
UPDATE: The price is now $1200
This is a jeep designed for PNW4WDA racing. This jeep has Formula desert dogs on the rear, but I can’t tell what tires are on the front. The front shackles are reversed. The front clip is all one piece (likely fiberglass). It looks like the body is just a partial metal shell. This jeep should also have a scattershield bellhousing (a requirement for racing). This also appears to have chrome tie rods and a chrome front housing cover. I wouldn’t be surprised if the rear was either locked or welded, perhaps the front as well. This is actually a pretty good price if you want to get started racing in the PNW.
“Race Jeep. Buick V-6. T-14 Tranny. Spicer 18 44 Rear 27 Front. Needs some work. Runs and drives. $1200.00 OBO. Contact Kris @ (253) 219-2208.”
One of the issue’s I’ve put off until now has been the air cleaner. I knew fitting an air cleaner between the hood and carb would be tight, a consequence of the tall Kenne Bell intake manifold. However, I thought I might sneak it in there, but after finally fitting the hood onto the front clip, I discovered that even a low profile air cleaner won’t fit. Unfortunately, the engine can’t drop much more (not that I want to drop and reweld the engine mounts for an extra 1 1/2 inches). The only solution left (that I could think of) was to put a bump into the hood. I REALLY didn’t want to do it. But, I need to keep moving forward on this project, so I decided it was the most expedient solution.
Once decided, I then had to decide the type of bump. After mulling it over, I chose to do a simple bump that follows the lines of the hood. The first step was cutting the hole in the hood. Next, I created a form out of a 2×4, putting a 20 degree edge, the same degree, but opposite, of the angle of the stripe on the body. I laid two coats of fiberglass and resin and let it setup. The good news is that the results are even and the angles correct. The bad news is that I’m not thrilled with the results. I’ve thought about adding some angles to the front to make the bump more interesting, but I think I’ll keep it simple and save the details for version 2 of the hood.
Here’s the hood precut
Here’s the hood with 3 sides cut. I used a cutting wheel to do the cuts and a flat piece of steel as a guide to create a straight line.
Here's a labor day weekend deal. If the only problems really are a water pump making noise and brakes that need attention, then this is a great price. It's worth a look if you are looking for a m-38a1.
" For Sale: 1953 Willys Military Jeep M38A1/CJ2A: This is a Labor Day Week End Sale! And just in time for deer season. The price is: $1500.00 dollars. This is a great deal for someone who is looking for an older reliable jeep and a part of history. All drive train in good shape, Engine, Transmission, Transfer case, rear end and front wheel drive. Clear California title, and is currently registered. Warn hubs on front wheel drive. Thor PTO Winch with about 100’ feet of 3/8” cable (works great). Jeep Cons: needs a water pump (Water pump bearing is starting to make noise) and brakes will need attention (Leak in master cylinder). Jeep runs very well, fun to drive, and starts right up. If you are interested in this jeep please call (650) 347-8434 (home) or (650) 504-0920 (cell) Thanks, Phil."
This jeep is located on the Oregon/Cali border near highway 101, so the drive alone is worth getting the jeep. This doesn't look in too bad of shape. The seller describes the body as fair to poor, but I've seen many worse bodies than this one.
"Body: Fair to poor condition, areas of rust.Engine: Has not run in 5 years.Tires: 5 in good condition.Other: Fenders & gas tank in good condition.Many usable parts if full restoration is not your thing.Shipping/Transportation will be the buyers responsibilityI'm located in California two miles south of the Oregon border on highway 101. I can be reached at (707)487-5808"
UPDATE: **SOLD** Was on eBay..
“1950 WILLYS JEEP, VERY RARE NAVY AIRFORCE RADIO BEACH LANDING FORWARD COMMUNICATION UNIT ORIGINALY. HAS LIFTING LOOPS FRONT AND REAR FOR HELICOPTER OR CRANE LIFTING. IT IS IN VERY GOOD CONDITION AND RUNS AND DRIVES VERY NICE. STUDY THE PHOTO’S AND SEE FOR YOURSELF. TIRES ARE GREAT, STEERS LIKE NEW, AND RUNS QUIET WITH NEW MUFFLER. THE SEATS ARE GOOD, THE ENGINE HAS PLENTY OF POWER FOR OFF ROAD PLUS A GREAT PARADE UNIT AND JUST CRUISING AROUND TOWN OR ON THE HIGHWAY.”
UPDATE: SOLD, but not picked up yet …
I think there is lots of life left in this CJ-3B, as much of it looks straight and in good condition. However, I would like a closer look at the front bumper area, as that bumper angles a little bit too much.
“I’m selling this 1953 Willys Jeep CJ3B for a friend and neighbor of mine. He’s drove it for as is for a long time. In December last year he pulled the stock T90 transmission to rebuild it as it sometimes popped out of third gear when accelerating. A huge storm hit, dumping so much snow it crushed his garage barely missing the Jeep. Would be a very good, inexpensive project for the right person. I will try to be as detailed and candid as possible but feel free to ask questions and I will answer as quickly as I can. Has a 289 Ford small block under the hood, add a battery, antifreeze and its a runner again. Has been converted to Saginaw steering, with column, box etc. steers easy. Stock running gear behind the engine, T90, spicer 18, stock axles etc. Still has good brakes, has only been sitting since Christmas rather than years in a back field like so many out there…”
**SOLD**
UPDATE: **SOLD** Was $1599
Given this is a non-running project that has had some mods done to it, the price is a little high. I don’t see any obvious rust on the body and the back looks pretty straight, but I can’t see much more from these pics.
“1948 Willys cj2a project needs a new home. Not running. Needs starter. Painless wiring kit partially installed. New gauges. New ignition switch. Do not have time to complete. Must sell”
There are three pictures of this jeep. Two I *think* are before it was torn down and the third looks like it is an in-progress rebuild. In the third picture, shown to the right, you'll note newer rims and how the body is sitting higher than before (could be a new SOA mod or different springs).
"1953 Willys Jeep CJ3B Project 231 buick V6 stock axles trany been gone thru tube frame vary clean 1 1/2 Body left missing some parts great potential. fairly clean body. call 530-228-1763 Mark / 530-877-1663 1750– OBO e-mail mdwight@c21selectgroup.com"
Last night i got the hood mounted, trimmed and latched. Once I determine where to mount the blocks (not sure what I'm going to make those out of yet), then it will be ready to patch, sand and paint.
UPDATE: The price is now $3500
I'm not sure I have seen a jeep with a stainless steel roll cage.
"1953 Willys high hood jeep. Dana 60 rear end, detroit locker. 360 AMC motor, T18 transmission. Custom made stainless steel roll cage. This is a diamond in the rough. $4,000.00 (208) 495-1221"
Over the past week I completed the form for the hood, applying a second coat of drywall mud to smooth the curves. I had to create the hood because I lengthened the front clip about 4.5 inches. Following that, I rubbed some turtle wax onto the form as a release agent. Then, I laid 3 layers of fiberglass & resin. Finally, I laid the hat channel I pulled from a different hood I had (which will serve two purposes — to hold the curve of the hood and provide support for the hinge).
As you can see below, the turtle wax didn't completely release well, so there will be some sanding. Also, rather than apply the gelcoat to the surface of the form (which I figured would not release well at all), I have decided to apply it once I finish sand the hood. Finally, I have done an initial trim on the hood and it fits well, but not perfect. It will take some additional trimming, patching and sanding to finish this, but it should do fine for a first hood (much better than the first hood on my first jeep).
The seller states $12000 was spent on the restoration of this CJ-3A and that it will now go easily down Cali highways at 80mph. My response would be, for starters, how does the hood stay down at 80mph, because there is only a hood latch on the passenger side fender (none on driver side) and no latch receptacles on the hood. There's no mention of the MB body on this CJ-3A. The rear lights are missing on the driver's side. Rather than a CJ-3A, the grille appears to be a slat grille in the front (probably the most valuable part of this jeep). Caveat Emptor.
"4 wheel disk brakes, rancho suspension, 10,000 lb warn winch, power steering, power brakes, newer Ford 250 6 cylinder motor, new tires, new wheels, ground up restoration, new interior. This old jeep has been lovingly professionally restored to better than new condition. I had power disk brakes, power steering, Ford 250 motor, and rancho suspension added recently. I also had the interior completely redone for $2200 with commercial grade heavy duty vinyl and super heavy duty rubber on the floors. I also had the jeep painted with a $5500 base coat clear coat paint job which looks fantastic. There's over $12,000 in restoration and now I've decided to sell it…."
UPDATE: Was $1800. **SOLD**
“I have a 1961 willys DJ3a that has military running gear. The body is in very good shape and the flat head 4 runs extremely well. Has very good oil pressure, does not smoke, drives very good for a 61 willys. The body is sanded down because i was going to paint it to get rid of the cheesy camo paint job that was on it. I have 150 dollars of slate grey metallic paint primer, and reducer and what not that will go with the willys for the right price. Please call and make an offer i am a very motivated seller, I need to get the jeep out of my buddies barn. “
This is a jigsaw puzzle. Looks like plenty of pieces with no obvious dents or rust.
"I'M SELLING MY JEEP WILLYS THAT I BOUGHT A COUPLE MONTHS AGO I WAS PLANNING TO CONVERTED TO A V8 BUT I DON'T HAVE TIME ANYMORE BECAUSE I'M GOING BACK TO SCHOOL. THE JEEP IS PART OUT BUT I HAVE ALL THE PIECES TO PUT IT BACK TOGETHER. THE FRAME HAS A 3 INCH LIFT KIT WITH NEW SHACKLES IN THE FRONT AND NEW SHOCKS,THE TUB HAVE SOME RUST ON THE PASSENGER SIDE FLOOR, I HAVE THE 2 FENDERS AND 2 HOODS FOR IT …. $1400 OBO 619 266 0886"
This might be a pretty good deal.
"This is a 1950 Jeep Willys CJ-3A. For the year, it's in great condition. It comes with a brand new, single barrel carbuerator. Nothing is missing from it, except the PTO I removed off the back. It has a 4 cylinder flathead. The engine turns over, but the new carb hasn't been hooked up yet and there's no battery so it deosn't run. I took this on as a project, but just won't have the time to put into it. It'll make a fun project for someone. Asking $2,750, but I'll consider offers. Email or call me at 303-718-0698."
There's been some mods to this one, more than described by the seller. Looks like a great trail jeep.
"RARE FIND! Relocation forces sale of Jeep! Original body, new rolling chaise, tires, custom roll cage, 5pt harness seats, 20 gal fuel cell. Custom made cover for outstide storage (has been garaged). Runs great and ready for off roading! More photos available upon request. Seller will entertain all offers and call with any questions. More pictures can be emailed. 503-314-6806"