emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
UPDATE: **SOLD** Was $1500
(11/07/2010) This has some rough edges, but appears pretty stock. I can check it out if necessary.
“I have a 1952-53 M38 Willys Jeep with top for sale. It has the doors and seat frames inside the interior. I had plans on restoring this to have some fun but things have changed in my life and it has to go. I am open to reasonable offers. Eamil or call me it you have any questions”
After last night’s post, I figured readers needed something more humorous. So, during some searches today, I stumbled upon some funny definitions of tools. It turns out these definitions have landed on a number of forum sites, however not many sites attribute this clever bit of writing to the original author, Peter Egan. Thanks to Swapmeetdave for doing some research into this.
Without further ado here are a few of these …
Electric Hand Drill: Normally used for spinning steel Pop rivets in their holes until you die of old age, but it also works great for drilling rollbar mounting holes in the floor of a sports car just above the brake line that goes to the rear axle.
Mechanic’s Knife: Used to open and slice through the contents of cardboard cartons delivered to your front door; works particularly well on boxes containing convertible tops or tonneau covers.
Drill Press: A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your beer across the room, splattering it against the Rolling Stones poster over the bench grinder.
Hacksaw: One of a family of cutting tools built on the Ouija board principle. It transforms human energy into a crooked, unpredictable motion, and the more you attempt to influence its course, the more dismal your future becomes.
Additional ones I found here, though they could be from Peter as well …
Pry Bar: A tool used to crumple the metal surrounding that clip or
bracket you needed to remove in order to replace a 50¢ part.
Hose Cutter: A tool used to cut hoses too short.
Two-ton Engine Hoist: A tool for testing the tensile strength on
everything you forgot to disconnect.
Dammit Tool: Any handy tool that you grab and throw across the garage
while yelling “DAMMIT” at the top of your lungs.
It is also the next tool that you will need.
Earlier this year, Greg reported that a MB and trailer sold at a Mecum for $32,000. Now he has the pics to prove it. That’s dedication! 🙂
HOG spotted this setup. It might interest someone …
“This is an old army trailer we have. Currently there is an old Onan generator bolted inside the bed. I can remove the generator if you aren’t interested in buying that.
One trailer tire is flat. It may hold air when we fill it. This has the rotating pintal hitch.
Floor seems solid. The tailgate is pretty rough. I will email my phone number, if you resond to the ad. I do not have a title for this. Delivery can be made for a reasonable fee, but you must inspect and pay for the item first. Roy.”
http://frederick.craigslist.org/rvs/2043494569.html
I’m no expert on these, so I’m taking the seller’s word on the information below ….
“1965 ISRAELI CJ5 GUN JEEP. VETERAN OF THE SIX DAY WAR. COMPETE WITH 106MM RECOILESS RIFLE. LIMITED PRODUCTION. THESE CJ5S WERE PRODUCED IN THE UNITED STATES UNDER SPECIAL CONTRACT FOR THE ISRELI GOVERMENT FROM 1965 TO 1967.
TOTAL PRODUCTION IS ESTIMATED AT UNDER ONE THOUSAND PIECES WITH SOME UNITS BEING RADIO JEEPS AND THE BALANCE GUN JEEPS,EQUIPPED WITH THE 106MM RECOILESS RIFLE. ALL OF THESE JEEPS ARE VETRANS OF THE FAMOUS SIX DAY WAR AND WERE USED IN AN ANTI TANK ROLE THIS CJ5 WAS RESTORED WITH ALL ITS ORIGINAL COLORS AND MARKINGS AS IT APPEARED ON THE BATTLE FIELD COMPLETE WITH A DEMILLED (NON-FIRING) 106MM. IF YOU HAVE ANY QUESTIONS PLEASE CALL. 239-707-4416.”
This does not run.
“1946 willy jeep. Selling as is does not run. No title. $600 or make offer”
Doesn’t run.
“1949 Willys Cj-3a…. Motor turns over but not running. Transmision needs to be installed. All parts included to finish. Would make an excellent winter project to take to camp next year. No title. $1500 obo Please call (906) two eight seven twelve ten.”
http://up.craigslist.org/cto/2047843980.html
Nice …
“49 Willys Jeepster in excellent condition. No rust. SBC/PG. Like new top and side curtains. Runs and drives perfectly. ASking $9000 Or trade for another car of equal or better value. Prefer cash. Email only.”
http://kansascity.craigslist.org/cto/2048383005.html
UPDATE: **SOLD** Was $600.
The seller thinks is a’56, which would suggest it is a DJ-3A.
“Willys Jeep CJ3 I think the jeep is a 1956 model, I picked it up in a trade and have too many projects ahead of it. Dont know anything about the jeep I brought it home and put the tires and wheels on it and havent checked it out at all. It has been converted to 12 volt and has locking hubs. Includes new 12 volt wiper assembly. The hardtop looks like it can be unbolted to remove it. Body has some rust but is still solid. Would make a good hunting or mud jeep. Jeep is sold as where is. Original Drive train Removable Hardtop 12 volt system Lockout hubs Payment Policy PayPal is Accepted Deposit is required within 24 hours after the Winning Bid Shipping Policy Jeep is pick-up only. Terms & Conditions Deposit is expected within 24 hours. Pick-up to be arranged Gurantee Jeep is sold as is where is. Jeep has no warranty or guarantee.
UPDATE: **SOLD** Was $17,975
Lots of customizations here.
“Take advantage of this 1948 Willys Overland with over $50K in Upgrades and Rock Crawling Gear! This Willys is in Exceptional Condition and runs as good as it looks! Featuring a 350 Chevy Crate Motor with 700R Automatic Transmission, New 37” Goodyear Wranglers with Beed-Lockers, New Set of Paddle Tires Included, CD Player, 205 Transfer Case “Bullet Proof”, Dana Front and Rear End Axel and Gearing, Front Disc Brakes and Rear Power Assist, Warn Winch that will lift this Jeep, Custom Frame and Roll Cage made out of Chromolly Steel, Rear Suspension is Quadraliptic allowing Articulation above a #10 on the meter, Rear Drive Train is Custom Cut and Rolled to meet the angle needed for Crawling, Fire Extinguisher, and Much More!! FOR MORE PHOTOS AND INFORMATION, PLEASE VISIT www.alreadydriven.com”
UPDATE: Price dropped to $1200.
“1953 but title says 1943. Has a 302 that was installed and I sold the fenders and grille that was cut for that engine. So now it has the right grille and hood but not cut so the radiator is not installed since I did not want to cut a hard to find jeep part. They only made this jeep from 51 to 53. It does have a M38 top with data plates for the top. Top is something we can deal on and does not go with the jeep. I paid $400 for the top. And the top fits 2A’s and 3A’s. The engine runs. I ran it before I removed the radiator and other grille. Sounded good. I do have the master cylinder for the brakes which is why I never drove it. Has the wrong hood since the M38 hood should have the snorkel and jumper openings on the passenger side of the hood. Body needs a lot of welding and the back wheel wells have seperated on the drivers side since the previous owner did not weld it and just used bondo and fiberglass to keep it together. Its not a lost cause but does need a lot of work. I may have a 4 cylinder which is not a M38 that we can deal on but it needs rebuilt. All in all with some spot welds and brake fixed and radiator installed it could drive. I just have too many projects and not enough time. I would consider partial trade for hunting items or a small trailer that can haul trash and my large 4 wheeler. Something with larger tires and newer with a ramp. As I said the top and 4 cylinder are something we can deal on. This is a rare jeep of the Korean era.”
http://seattle.craigslist.org/see/cto/2048880735.html
UPDATE: **SOLD** Was $2800.
“This is a 1951 Willys truck that I bought as a project, but after a divorce and being a single parent, I find I don’t have the time or money to fix it up. It currently runs, but as with all old cars, could always use some work. It is currently registered till February. Does not have the original motor trans or rear end, they were converted before I bought it. It has a Dodge 225 slant 6 motor and trans, and a chevy rear end. There is noticeable rust/cancer on both front fenders and along the drip rail molding, and I suspect there is some in the bed, but it has been painted over. I also have a chevy 350 with a 4 bolt main, that I had intended to put in this truck, that I will sell with the truck. Please only contact me if you are serious.”
UPDATE: **SOLD** Was $5500.
“This is a classic 1961 Willys Jeep Pickup Truck. Good running condition, great utility use! Rebuilt Ford-302 V8 Engine (with only about 2,000 miles). 4-Wheel Drive with Overdrive Transmission. New Tires and Brakes. Asking: $5,500.”
This appears in good shape.
“RARE dual stick/dual output PTO for Willys Wagons and Pickups.Has been gone through and is in great shape.”
http://portland.craigslist.org/mlt/pts/2043182777.html
UPDATE: Dexter forwarded some pics he received. This is pretty beat up. It was originally listed as a MB, however I think this is a mix of parts. The seller wants $800.
“Selling all or parts. Some of what’s for sale: Dodge Ramcharger, 3 Dodge trucks including ’66 3/4 ton Power Wagon, 4 Broncos, 3 Blazers, Jeep Cherokee, Toyota, Chevy Luv, 2 Isuzu Troopers and ’42 Willy’s Jeep. It runs but is missing the radiator. Many other trucks and parts for sale also. Tool boxes, ladder racks, hitches, doors, fenders, glass. Many junk cars that need to be hauled off if your interested. About 30 travel trailers and motor homes too. Also have ’70 dodge Challenger 340, automatic. Does not run but has straight body and good glass. ’49 Chrysler 2 door hard-top, no dents, or rust, all glass, lenses and chrome is good. Nice resto project (209) 535-8788 after 6pm for more info. Steve.”
http://modesto.craigslist.org/pts/2039918634.html
UPDATE: **SOLD** Was $1000
(09/09/2010) The seller says it is 1953, but it appears to have a CJ-2A body on it.
“1953 willys – 1000.00 or Trade. Perfect Project for the Jeep Enthusiast. Engine Runs, Manual transmission- clutch stuck, 4 wheel drive, no title. ”
No pics provided. This past weekend (nov 6/7) thisi jeep was part of an estate sale. This might be still available.
“… 1605 NE 63rd St. 98115… 1942 Ford Willys Army Jeep”
Brett spotted this unusual FC with some interesting updates.
“1960 FC-170 pickup. Racing Head Service Chev. 350, built with low-end torque cam, rebuilt TH-350 transmission, NP-205 transfer case, front axle: Dana 44, Truetrac differential, rear axle: Dana 53, Willys Power Lock differential.fast and rusty. $3500 firm (435) 654-3270.”
http://www.ksl.com/index.php?nid=218&ad=13175602&cat=402&lpid=&search=
This appears to have a later model rear end and windshield. What’s that stick out the rear passenger’s side?
“1941 Willys Quartermasters Jeep. Excellent body and undercarriage. Solid floor pan, no rust, stored indoors. Ran great when parked app. seven years ago. Now needs starter solenoid, water pump, and carb kit. Engine turns freely. Great for the ranch or lease. Have title.”
UPDATE: **SOLD** Was $3500.
This has a variety of mods.
“1946 jeep CJ2A Many mods. V6 fuel-injection, 8000lb Ramsey winch, tow bar, full roll cage, 3″ lift kit, limited-slip all four. duel tanks, tilt steering wheel, power steering, high back bucket seats, headers, 4 speed trans, 12000 miles on engine. ”
UPDATE: SOLD****
“1951 CJ3A, ID#451GBI23518, Miles-52,275, New Tub (willys overland), Total rebuild (frame up), New brakes around, Rebuilt starter and generator 6v, 5 new 33×9.50 TSL Swampers on stock willys rims, Modified aluminum Military artic hard top, Rebuilt 2 way plow (works Great) with JEEP HI LOW pump, Rebuilt trans, New 6v wiper motors, New Rancho 1.5 inch lift, New wiring harness, New lights around, New plastic gas tank, Rebuilt Harrision heater, New Best Top low back seats ( custom ss seat frames), Lockout hubs, All gauges work, Rebuilt emeg brake works well, New York State Reg and Insp., Very nice running stock 134 flat head 4, This willys was done right (trying to keep the stock theme), Every thing works whether in the woods or on the road, Solax carb, New optama 6v battery”
This needs completion, but doesn’t appear that far from it.
“Project Jeep, started it, ran out of money. Still needs work. Rebuilt engine & transmission. Interested call B.J. 614-484-3692”
http://columbus.craigslist.org/cto/2043741555.html
UPDATE: **SOLD** Was $1800
(07/01/2009) This has a fiberglass tilt front clip and a fiberglass body. It could use a paint job at the very least.
“This willys has a fiberglass body w/ tilt front end, 350 4 bolt main, 350 turbo transmission auto. w/ 4wd , power brakes,power steering, tilt steering wheel, stewart warner gauges.”
This looks pretty solid.
“I have a 1946 Willys CJ2a Jeep for sale. It runs great. Awesome vehicle. It is a lot of fun to drive. I can’t keep it because I have no room for it anymore. Asking $,4500. Feel Free to email me with any questions.”
http://jerseyshore.craigslist.org/cto/2045710278.html
UPDATE: **SOLD** Was $3000
(01/24/2010) It’s a bit dirty, but sounds like it’s in solid shape.
“-I have had it for about a year and a half i put a 4in lift and 34in super swamper ltb tires
-it has a 327 with ported heads, oversized cam, edelbrock carb and intake, newer distributer plugs and wires
-the tranny is a muncie 4 speed out of a 68 camaro, stock transfer case with the warn overdrive lever ( it has 4 shifters total)
-it has stock axles with 5.38 gears
I drive it down the freeway at 60mph and there isnt any shake to it. it has never broke down on me and runs very strong and has more than enough power (i have pulled the front tires off the ground a few times). I have taken it wheelin and it does great but the body has zero dents in it and absolutely no rust what so ever. The only difference from the pics is i put black wheels on it and painted the diamond plate corners black. The paint is in good shape but it does have scratches in the paint. I am sking 4300obo and will consider trades for 95 or newer honda or something like it.”
