To Top

1951 CJ-3A Albuquerque, Nm $6500

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

Lots of updates to this flattie.

“I have to sell my beloved cj3a. It is in amazing shape for as old as it is. Gets TONS of attention and is tottally streetable.

1951 Cj3a; chevy 4.3 tbi engine; Frame boxed in for strength; Dana 44 front and rear axles with 5.38 gears, rear spool front detroit locker, rear axle converted to disc brake. Muncie 4 speed tranny with granny low 1st, mated to a dana 18 t case. t- case is built with dana 20 internals for stronger intermediate shaft. It also has a advanved adapters over drive so it cuts each gear in half, essentially giving you 16 forward and 4 reverse gears.

Body is in excellent shape with no cancer or rust. Full roll cage, newer 36in super swampers. Suspension is spring over axle, using wrangler springs. front shackle reversal. it flexes AMAZING with tons of droop.  This truck runs awesome. I need the money, and have too many vehicles. i dont have time to wheel it anymore. It drives around town fine and does about 70 on the highway no problem. I hate to see it go. I am asking 6500 obo so feel free to shoot me an offer. I may consider cash and trade for fire arms.  please call or text as i do not check email much.  Chris 505-449-8693.”

http://albuquerque.craigslist.org/cto/2169797457.html

 
To Top

Ford Rims with Center Cut Out

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Steve forwarded this post to me.  Apparently, he’s had experience with something similar rims and advises that they be avoided!

http://houston.craigslist.org/pts/2165558878.html

 
To Top

1943 MB Madisonville, Tx **SOLD**

• CATEGORIES: MB This site contains affiliate links for which I may be compensated.

UPDATE:  An eWillys reader bought this one.  **SOLD**

This has some updates.  Note the unusual transmission cover.  I wonder what the circular thing is?

“1943 jeep mud tires 283 chevy engine very good condition street legal title in hand fun”

 
To Top

Unfinished Sand Rail Winchester, Ca $600

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Price dropped to $600

(01/11/2011) Given the paddles are included, this might not be a bad price.

“1946. was being built for the sand but could make a cool street rod or rat rod. set up for a small block chevy with a 4speed. NO ENGINE or TRANS. It needs a lot of work. 2 wheel drive, comes with what you see. Padels- needs tubes. New 15 gallon fuel tank. Ford rear diff. new 411 gears.Headers for SBC. I have a title for it but it has’nt been registered for years, should be off the books.$600.00 takes all. (951) 265-3149”

http://inlandempire.craigslist.org/cto/2169694345.html

 
To Top

No Updates Tonight

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

I just drove up to Seattle and will be around for the next couple of days (I got a special pic I’ll be posting friday night).  So, no updates tonight, but I plan to do some thurs AM .. will probably be updating throughout the day.

 
To Top

Builds: Goose Fixes up His CJ-3B in only 4 Months

• CATEGORIES: Builds, Features This site contains affiliate links for which I may be compensated.

Goose wrote me an email today, announcing he had finished the restoration of his CJ-3B.  Not only did he complete his budget-conscious restoration in only 4 months, but he also documented it in two different locations (see links below); not a trivial task!   He’s done a good amount of work in a short time and I think he’ll be happy with it for quite a while.  Well done Goose!

Goose writes, “Hey Dave. I finally got my jeep finished and wanted to share the story. I’ll include a couple pics with this email but feel free to pull any others down from the links below too. The first link is from thisoldjeep, which I discovered here and the second is from a site where I frequent due to my dirtbike passion.

http://thisoldjeep.21.forumer.com/viewtopic.php?t=578&highlight

http://www.thumpertalk.com/forum/showthread.php?t=949807

Here are a couple before images:

Here’s a midway point photo:

And a couple completed photos:

 
To Top

A Crosley with a Mini Crane

• CATEGORIES: Features, Old Images • TAGS: This site contains affiliate links for which I may be compensated.

Randy spotted this unusually equipped CrosleyHe spotted it in this USGS document.

 
To Top

Flattie Parts from Brazil

• CATEGORIES: Website This site contains affiliate links for which I may be compensated.

UPDATE:  Roberto had originally noted this was from Brazil, but when I checked out the website, I saw Londrina – PR, which I interpreted as Londrina, PR.  So, I did a search from Londrina, PR and somehow found a town called Londrina in Puerto Rico.  Unfortunately, it seems I was a sleep at the keyboard.  Because Hugo, from Uruguay, contacted me and told me the company was based in Brazil.  Puzzled, I did another search and could no longer find a Londrina in Puerto Rico.  Oh, the mysteries of the internet!  So, thanks to Hugo and Roberto!

Roberto spotted this Cinfel website.  I don’t know anything about the seller and I can’t tell if the seller is simply a reseller  or manufactures these parts.  Anyone know?

 
To Top

1959 CJ-3B Snowflake, Az **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE:  Was $1500. **SOLD**

(01/09/2011) “1959 CJ3B for sale all original make offer”

 
To Top

1944 MB Los Chavez, NM $800

• CATEGORIES: MB This site contains affiliate links for which I may be compensated.

UPDATE:  See the comments below.  This may be another NM Scam.

No pics provided.

“Old Willy year model original 1944 in fair running condition, in need of restoration , new mexico body not much rust on this one , was told it was original us navy , but to not know for sure, has an old canvas top needs replacing, it is still usable, only surface rust on the whole body, 4cylinder engine 3 speed transmission, the frame has never been cut up to put in a big V8 price is firm, if I cannot sell it for this price I will sell it for scrap steel next week. the jeep was given to me by my brother who pass away 2 years ago, I tried to fix things on it but no one would help me out. So got fed up with it and I do not even use it or need it it is taking up part of my yard space, and I got it for free , so I don’t really care about it. I have a good title in hand , email me for address to come view and bring cash. I will not hold it for any callers, first come first serve, Please to not email with stupid questions I might trade for other items , let me know what you have to trade. and please will not trade for things that go bang bang.”

http://albuquerque.craigslist.org/cto/2166953841.html

 
To Top

1947 CJ-2A Cheyenne, WY **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $750.

I think this needs paint ….

“1947 willys jeep, good parts or hunting in the hills vehicle. Got title but no keys, needs new ignition switch.”

 
To Top

1952 M-38 Fremont, Ca $2000

• CATEGORIES: M-38 • TAGS: This site contains affiliate links for which I may be compensated.

This might make a good restoration project if the seller’s description is accurate.

“This is a PROJECT Jeep from the Korean War era. It is an excellent platform for a complete restoration, or you can build it up as a fun Jeep to run around in.

It has many very valuable and rare military spec parts, and will come with the following parts. I will not separate the parts or allow cherry picking of the expensive and rare items. You could buy this jeep and easily part it out for more than my asking price.

Jeep rolls, steers, and stops. The axles and drive train are complete and original. The correct stamped Willys RMC engine is disassembled, but remains in-frame. The body has both data plates, and they match.

Comes with correct and original Carter YS waterproof carburetor, Engine lift hook, air cleaner, underhood battery box in excellent condition. Has correct 24Volt generator, starter, and distributor. Correct headlight guards, and all original Willys sheet metal. Very little rust, and the body is solid.

Has date correct Cooper NDT mil spec tires, etc. Original seat frames in good restorable condition. Comes with other NOS and good parts. Sold with bill of sale only. Call James at 510-682-6398 to see it.”

http://sfbay.craigslist.org/eby/cto/2167127763.html

 
To Top

1967 CJ-5 Oswego, Il **SOLD**

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $500.

The engine is out.  This might be good for some parts.

“Engine is out,but it runs good.Was removed to replace clutch,but later determined that transfer case is stuck in neutral.I just finished putting a floor in it,but the rest of the body is pretty much shot.Selling whole,will not part out.Plow set up has been removed”

 
To Top

1967 Canadian M-38A1 Vancouver, Wa $2750

• CATEGORIES: M-38A1 • TAGS: , This site contains affiliate links for which I may be compensated.

This appears sound.

Canadian edition army jeep – 1967.  Michael at 1-604-408-5802 (please leave a message)”

http://seattle.craigslist.org/see/cto/2166023488.html

 
To Top

1948 Wagon Stevenson, WA **SOLD**

• CATEGORIES: Jeep Rods, Willys Wagons This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $1000

“willys 1948 hot rod rat rod project
i would be willing to sell for $1000.obo or trade (not in to guns) although thanks to all who offered before just not my thing
i have had some look they all seem to think that maybe old army/coast guard ambulance???
it currently sets on s10/s15blazer/sonoma jimmy 2wd frame with 4.3vortex auto. running gear pretty much in place
what you see in pictures is all i have it does have good glass, except it is missing drivers door windows it has s10 front seats
i just don’t have the time to get on the road i think with a couple of week ends you might be driving???
I’M open for trades—- s10/s15??? quad??? car trailer??? enclosed trailer??? car???
i would be happy to show almost anytime between 8am–10p”

 
To Top

1958 CJ-3B Land O Lakes, Fl Make Offer

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

This looks like it has been ridden rough.

“it runs drives has 38 swampers on it can seperate trailer if needed call or text 813 420 0324”

http://tampa.craigslist.org/psc/cto/2167081086.html

 
To Top

1946 CJ-2A Long Creek, Or $6000

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

No pics provided.

“I have a 1946 jeep Willys CJ2A. It is in grate condition. It has a ford high performance 302 with a double pump Edelbrock carburetor, and a high-rise manifold. The motor came out of a stock car so it isn’t shy on power. It has the original Dana 41 axles with the original four speed transmission. It has a black leather soft top on it. The soft top is in grate condition. It doesn’t leak or have any faded marks. It has a set of 33/12.50/r16.5 wild-country mud terrain tires that only have at most 1000 miles on them. It has two bucket seats in the front and one bench seat in the back. It has a 3 inch rancho suspension lift. It has a full role cage jest in case u wants to have a little fun and don’t want to get hurt. The four-wheel drive works grate I have never had a problem with it in any type of whether. I really don’t wand to sell it so I’m at $6000 firm. I really want to trade it for a big lifted 4×4 truck or a nice AWD car. I want to try to get something close to the value of the jeep but I will look at all offers. Call of text lance at 541-620-2714 and maybe we can make a deal. please call after 4 pm or leave a message and i will get back ahold of you. If you have any question just ask I will try to answerer them the best I can. If u would like to see a pic of it give me your e mail or cell number and i will be more than happy to sent you some”

http://eastoregon.craigslist.org/ctd/2166622546.html

 
To Top

Year? Wagon Reno, Nv $3000

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

A reader forwarded this wagon.  It does not run at this point.

“Willy’s Wagon, needs a home, too many projects. Ran good. all original, new fuel filter, possibly needs new fuel line rust on back quarter panels. $3000.00 or best offer.”

http://reno.craigslist.org/cto/2162333209.html

 
To Top

Roberto’s Story of the Jeep

• CATEGORIES: Artists/Drawings • TAGS: This site contains affiliate links for which I may be compensated.

Roberto Flores recently completed a story of the lineage of the jeep that was published at French magazine “4×4 Story Spécial Jeep“, issue 35. Great drawing and thanks for sharing it with us.

 
To Top

GPW Barcalo Wrenches Dublin, CA **SOLD**

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** 

“Barcalo – Buffalo Wrenches GPW Jeep Ford Wrench set of 9 + I have the Holy Grail of this set, the 723.

I have a extra Barcalo – Buffalo – USA – 723 open end wrench size 7/16″ – 3/8″ .

Also a 28S – size – 25/32″ – 5/8″

These are the wrenches that came with the pouch. These are WW2 military issue. for many vehicles.

I would like to take offers on these wrenches. Collectors are in need of the 723 wrench to finish off a set they need for their Ford Jeeps. I have sold the 723 wrench’s for $75. each. make a good offer if you want or need them for your collection.

1″ – 15/16″ part # 1033C

7/8″ – 13/16″ # E1731B

7/8″ – 3/4″ # 731A

3/4″ – 5/8″ # 1729

25/32″ – 5/8″ # 28S

11/16″ – 9/16″ # 27G

19/32″ – 1/2″ # -25-

1/2″ – 7/16″ # E1725

7/16″ – 3/8″ # 723 — I have 2 of these.

Pouch for the tools

Can anyone help with what other tools would be in the pouch. their are a lot of extra tools that came with the pouch and end wrenches. ”

 
To Top

1952 CJ-3A Toulumne, CA **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** was $1500.

This looks pretty solid to me. There must be a story here ….

“52 Willy Flat fender, clean body on frame, no running gear, 2 in roll cage, current non-op, clean title, $1500.00”

 
To Top

1946 CJ-2A Murphys, Ca $2750

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

It is a project still.

“Good start on project jeep. New fuel tank, seats, bumpers, tow bar, floor pan and other body work started. Everything is there just needs a little more time.”

http://modesto.craigslist.org/cto/2164083790.html

 
To Top

1951 Truck Medford, OR **SOLD**

• CATEGORIES: Willys Trucks This site contains affiliate links for which I may be compensated.

UPDATE:   **SOLD** Was $1500.

“Ok people you can get this old classic cheep its all mostly complete the motor runs so spend a little and drive it away i have done all the monkey work so you can gain from my loss.Sorry cant play any games with the price look it up i am about 3 grand cheaper than anyone else thanks.”

 
To Top

Year? MB Lockwood, Ca $1000

• CATEGORIES: MB This site contains affiliate links for which I may be compensated.

UPDATE:  Still Available

(11/30/2010) The sellers has a rolling chassis for sale as well.

“1940’s Jeep*** Can be restored or used for parts…Has 225 buick v6, has chevy steering,,Asking $1000.00 for complete jeep,will also consider selling in parts…** Check out the photos. **

Jeep Parts For Sale……..Selling complete 1961 F- Head Engine & Frame with Front & Rear Axles……….** Check out photo ** Make me an offer…..

Numatic Over drive for older jeep.. Fits Model 18 transfer case..good condition..$500.00 firm on the price..

Email or Call for prices on parts or more info. 805-472-2207 or # 831-737-7473.. If no answer leave mess. I’l return your call. I will delete this post when all items have sold..Thanks for checking out my ad..”

http://monterey.craigslist.org/cto/2159647244.html

 
To Top

1953 CJ-3A Ferndale, WA **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $750.

(12/29/2010) There might be some value here.  It looks like it has a MB or GPW body along with a Bobcat fiberglass hood.  It almost looks like an old racer.

“For sale is my very good running 1953 Jeep CJ3A. The jeep starts, runs, shifts and drives well. It has a early 1970’s Buick V-6 engine installed. Saginaw power steering box installed. 1953 was the last year of the CJ3A before they went to the high hood model. The 4 wheel drive works but the hubs are sticking and need to be taken off and cleaned. The Jeep has some rust here and there but nothing that can not be fixed. It has an aftermarket fiberglass hood that needs a couple hours of glass work for two very minor cracks. Has a hydraulic brake lock device installed for stopping on steep grades. Needs headlights installed. Very nice roll bar. Clean title in hand. Feel free to come take it for a test drive. FREE DELIVERY WITHIN 30 MILES (Except to the islands or Canada). PLEASE – SERIOUS BUYERS ONLY. I do not have the spare time to waste on flakes and jokers. $750 OBO”