This four-page July 1964 Jeep Service and Parts News highlights. Note the directions on page one for removing protective wax from new vehicles after they arrive at a dealer. On page four, the bulletin announces a new Tornado Engine break-in methodology. I wonder what was wrong with the old, original one?
Willys Jeep Netherlands Pin on eBay
This neat, very small pin, is reportedly that last of which was made during WWII and found amongst a group of these that have been sold or given away.
View all the information on ebay
“Vintage WWII Jeep Willys Stick Pin
This came from an antique dealer in the Netherlands who said
they were made during WWII and found later in the factory
I had a dozen, sold 3 or 4 to serious collectors and gave the rest to my son and his friends
This is the last one; be among the elite owners!
Card Measures around 2″ tall, 1 1/2″ wide. Pin measures 1 5/8″ tall, 7/8″ wide
Good Ready to Wear/Display Vintage Condition, as seen in photos
Check out my other WWII Pins and Jewelry, Most listed in Jewelry Category, a few in Collectibles,
some seen in last photos, this auction for Original WWII Jeep Willys Pin on Card only”
Photo of Dysarts Truck
Glenn shared this image of a fancifully decorated Willys truck from Facebook. According to this short history, Dysarts has been a restaurant and store in Maine since the 1960s.
FC-170 Hostess Tray on eBay
UPDATE: This is actually a “hostess tray”, not an ashtray. As noted in the comments, the difference between an Ashtray and a Hostess tray is the semi-circle attachment that holds cigarettes (see here: http://www.ewillys.com/wp-content/uploads2/2020/06/1960-02-willys-news2-lores.jpg).
The interior of this hostess is black. Unclear if the black is original or not, but my inclination is that it isn’t. It’s listed at $109, but the “Make Offer” option is available.
View all the information on eBay
“Here is a really cool vintage, Willys truck Jeep CJ advertising metal ashtray. The ashtray is in good to very good condition. It measures about 6 1/4 inches in diameter. The top has been painted black. Sorry about the reflection from the light.”
1949 CJ-3A? Greenwood Village, CO $37,548
Given the windshield and the rear bumper, I have to wonder if this wasn’t originally a Fresno area designed jeep. The interior dash has some custom aspects.
https://www.facebook.com/marketplace/item/1415929289134882
“This vintage 1949 Willys CJ 3 Jeep is a true gem with only 60,112 miles (Chassis) on the odometer. It’s been lovingly modified with a powerful Chevy 350 engine. If you’re looking for a classic with modern performance, this Willys CJ 3 is the perfect choice. Whether you’re an off-road enthusiast or simply want a unique and eye-catching ride, this Jeep has it all.
Don’t miss this opportunity to own a piece of history with a touch of modernity.
– VIN – ID42542COLO
– Tuffy Box center console
– 4 Speed w/ Overdrive
Upgrades:
– 11” Flywheel w/ Center Force Clutch
– Chevy 4 Bolt Main 350 ( 200 miles on Motor)
– SM 465 Chevy Transmission w/ Advanced Adapter
– Ring & Pinion 4.88 Front and Rear
– Warn Winch model 8274 w/ Remote Control
– Warn Overdrive
– Axles Dana 27 front / with Posi Warn Locking Hubs
– Rear Dana 44 / Full Floater Axles w/ Posi
– Air compressor w/ tank outlet gauge & shut off
– Stainless Steel on Firewall / Bumpers / Wheel Wells / Gas Tank (28 Gallons) Motor Mounts / Skid Plates / Radiator Mount / Battery Box / & Transmission Cover
– No Test Drives
– For sale by: Evolve Automotive”
Ramsey 50R Netherlands €8000 (Approx $8560)
Wildenberg Parts out of the Netherlands is selling this Ramsey 50R for the M-38. The company has a container leaving for Minnesota soon, so the cost of transport may be reasonable. David can be contacted at +31 (0) 317 618 218 or info @ wildenbergparts.nl (remove spaces around the @)
“The holy grail of M38 parts…
Complete Ramsey 50R winch setup.
Contains:
NOS Winch
Used good condition PTO (very rare)
NOS joints
NOS long shaft
NOS main plate
NOS rubber boots.
New made frame, short shaft, hanger bearing & PTO plate.
€ 8000″
Located in the Netherlands. I have a container leaving to MN soon, so transport could be reasonable.”
1947 CJ-2A Sun Valley, CA $7500
This has another example of a temp-fix for keeping water from dripping onto the engine.
https://www.facebook.com/marketplace/item/1782956968842539
“1947 military Willys Jeep, manual transmission, runs, four wheel drive, in good condition, needs battery. Also selling Jeep engines, drive shafts, and manual gearboxes”
Custom Flatfender JeepRod Milton, FL $33,500
John shared this ratrod build.
https://www.facebook.com/marketplace/item/722031816493417
“T bucket chassis with 1946 Willy’s cj2a body. 360 small block Chevy w/6:71 blower. Reverse pattern th350 3000 stall. Titled as 1979”
1953 CJ-3B Orange, CA $7500
UPDATE: Still Available.
(05/15/2023) This looks like it was quite the rig back in the day.
https://www.facebook.com/marketplace/item/1546401682798065
“1953 Willys CJ3B 327 4 spd Muncie 4wd drive works , Long tube headers, 4 wheel disc brakes, rebuilt transfer case. Runs and drives great and fast. All gauges work new fuel tank. Has full soft top and old bikin top underneath it. Custom roll bar done in the 70s. Newer Toyo Open County’s 33×10.5r15 on old turbines rims. Super cool Willys done back in the day and just brought back to life!”
1950? CJ-3A? Colorado Springs, CO $7000
Listed as a 1950, this has some updates, but also appears to have a CJ-2A body.
https://www.facebook.com/marketplace/item/627050782872103
“1950 army jeep, 1600 miles Chevy 4 cylinder motor, runs good tops out at 50mph, custom seats and top, perfect hunting vehicle, 7000 obo”