UPDATE: Price dropped to $1600.
(06/13/2011) Mark from Jeeptruck forwarded this one.
“The pickup came originally with a four-cylinder, but a prior owner installed a 1964 Ford 262 cubic inch straight-six. This engine came only in Ford’s one-ton and larger truck series. The Willys has been stored since 1985. It has a clear title. After rebuilding the carb, cleaning the fuel-pump, replacing the plugs, adjusting the valve lash, and pulling the oil pan to clean it and the oil pump, the truck starts easily and runs very smooth. While the original engine used a mechanical clutch linkage, the six-cylinder uses a hydraulic clutch. Clutch and brake hydraulics are supplied by an old-style GM one-reservoir brake/clutch master cylinder (looks identical to a Raybestos part #MC34404). This master cylinder is dry and rust filled, so it will need to be replaced. So currently the Willys has no clutch or brake action (The parking brake works great!). The Willys has its original T-90 (3-speed, floor-shift) transmission, Dana-18 transfer case, Dana-25 front differential, and Timken (clam-shell) rear differential. The body is solid except for the outer floorboards (which need to be replaced), and some corrosion at the rear sides of the bed (refer to the photos). The electrical system seems to be 12 volt, although the wiring is mostly original. The coil has a resistor before it (like 12 volt) and the ammeter shows charging in the normal range (uses a generator).
As the Willys has NO clutch or brake hydraulics, IT MUST BE TOWED OR SHIPPED. It is sold AS-IS; NO WARRANTY.
The Willys is in the Salt Lake City, Utah area. Contact by email at: randall1921@hotmail.com”
http://www.jeeptruck.com/sale/ad503/ad503.html