Dan spotted this truck.
“1953 Willys Pickup Truck. Original Flathead 4 Cylinder, 3 Speed (with hi and low) 4×4. Runs great, needs battery.”
Dan spotted this truck.
“1953 Willys Pickup Truck. Original Flathead 4 Cylinder, 3 Speed (with hi and low) 4×4. Runs great, needs battery.”
UPDATE: **SOLD** Was $4800.
The sides of this are a little rough.
” On basis of www.oldcarsreport.com (August 2012) in “good” condition.
• A drivable vehicle needing no work to be functional
• Haven’t used 4 wheel drive, only 2 wheel drive.
• Previous owner added roll-bar, good military tires (only about 2,500 miles in last 7 years), headlights and turn signals, and bucket seats.
• Present owner had generator rebuilt; starts great.
• Driven May — November; stored inside during winter
• Needs a new speedometer (works at low speed)”
This looks solid.
“New paint, winch, runs fine. 321-961-3946”
Looks solid, but can’t tell a lot from the picture.
“Willys Jeep CJ2A 1946. In great shape, runs good. $8750k obo”
UPDATE: Status Unknown. Was $8000.
(03/01/2013) This doesn’t run at the moment, but it could be a minor issue.
“I am looking to sell our 1943 WWII Army Jeep. Before we owned it, it belonged to my Grandfather. He was a Captain in the US Army during WWII, and in later years purchased the same year military jeep that he used during the war, and had it restored. It was in good running condition up until the time he passed away. We have owned it now for 5 years. It is not running at this time, but I believe that it is from sitting the past few years. It has been garage kept. We also have the original manuals for the jeep. This has been a very hard decision for us to make, so ONLY SERIOUS INQUIRIES will be considered.”
“Have several MB & GPW misc. Jeep parts.
Also CJ-2a & CJ-5 parts.
Let me know what you need.
J.Mac 303-823-5308 Lyons, Co.”
UPDATE: **SOLD** Was $5400.
This is a project.
“1953 willy’s 3B high hood. If you ever wanted to build jeep here’s your chance, it has Dana 44 high pinion differentials, I have a T-18 transmission with a Dana 300 transfer case, ford 351W, I have a motor mount kit from advance adapters, a painless wiring kit, brand new best top, window seal/ molding it comes with an extra fuel tank in the back where the back seat goes, tail gate that has willy’s on it, and a front grill that has willy’s on it too. I have a radiator as well. Drivelines etc… 8274 warn winch, Will separate. Call if your interested.”
UPDATE: **SOLD** Was $6000
(04/22/2013) This has had some floor board work.
“All mechanicals rebuilt. Original body with rusted panels replaced. Pretty much stock except for 12 volt conversion, solex carburetor, 15 inch wheels and CJ3A windsheild. Lots of parts”
Bob reports they’ve been running this Jeep Train in Galveston, TX, since 1951. I tried to find some old photos or articles, but didn’t have any luck.
UPDATE: **SOLD** Was on eBay.
Here’s a rare postcard advertising DJ-3A Surreys (though they describe them as Galas).
I don’t know anything about these jeep-like Ramirez vehicles.
“original magazine article , 11.5 x 15 , Spanish text , has a horizontal fold , this article continues onto another page which is not present. Produced by Trailers De Monterrey , Mexico City , Mexico. This item is AutoLit Part #wg7786-IRPJFL.”
UPDATE: Was listed at $150 in New Hampshire. Now on eBay in NJ for more.
Not sure what’s all missing on this sign, but it doesn’t look complete to me.
How about this unusual jeep?
“Selling this Custom Hunting Jeep. It is a must see and runs great. Has a Winch and a feeder, and a raised platform, for hunting from the jeep. lot of work was put into this Jeep and works great on the Dear lease. Call Luke at (713)805-1154, and make a good offer. Need to sell. thanks for looking”
This looks solid.
“1947 Willys Jeep 4WD Truck
In Southern California until about 1994. Very little rust. This is the rarest of all Willys Jeep Trucks. Only 2,346 were produced with only 1,760 available in the U.S. because of exports. It has the original flathead 4 cyl. that has under 1000 mi. since complete rebuild by professional rebuild shop. New brakes, wheel cylinders and master cylinder. New exhaust muffler and tailpipe. LED taillights and parking lights. I have all of the receipts. Runs Great!
$5,500.00 or OBO.
253-576-1091, cell phone or 253-864-0676, home phone.”
UPDATE: **SOLD** Was $12,600
This looks solid.
“1943 Ford ARMY Jeep, Parade Jeep
Includes extra set of COMBAT rims (Split rims) with tires.
Shovel & Trench shovel, Gas Can, Bored out grenades, Windshield cover, plus more…
Mileage as stated 900+”
Nice looking Jeepster.
“1950 Jeepster, well cared for but need to sell. Possible trade. Asking $16,500 or OBO. Please call Bob for more info #541-420-5855”
It looks dented along the passenger side.
“I am selling my newly painted Wyllis. Everything is in working order, brakes could use some attention, however I installed a new master cylinder one month ago. This jeep is street legal! I currently applied for a lost title so I can’t actually sell until it arrives but should be any day now. I would also be willing to trade for a full-size truck four door 2wd. Call with any questions…318 three zero five 54nine nine.”
UPDATE: **SOLD** Was $10,000.
“NOW ITS TIME TO LET SOMEONE ENJOY IT..THINNING THE HERD….HAVE OTHER PROJECTS TO ATTEND TOO….LOCATED IN NC NEAR RALEIGH
WANT PERTINATE INFO ON IT PM ME WITH YOUR NUMBER AND I WILL CALL AT YOUR CONVIENCE THANKS …$10000.00 CASH
I TRAVEL ALOT SO IT MIGHT BE A DAY OR TWO TO GET UP WITH YOU ..
PUT ON REBUILT DISTRUBITOR FROM THEN & NOW..HAD A RESTORATION SHOP NEAR ME INSTALL NEW INTERIOR ,NEW WIRING HARNESS FROM WALCKS..CARB DISTRUBITOR REDONE BY THEN & NOW..GAS TANK IS ORIGINAL HAD IT RESTORED ..GAS GUAGE WORKS WHEN IT WANTS TOO..RUNS LIKE A CHAMP ..
I HAVE 2 CONTACTS FOR A TRANSPORT IF YOU NEED ONE…ARRANGEMENTS CAN BE MADE FOR PICK UP ..”
Hard to tell much from the pics. No description included, except to say it runs.
Marc forwarded this slightly altered version of the 1946 CJ-2A that is back on eBay. Version 1 ; Version 2
“CJ-2A EARLY HARD TOP TYPE W/ (FAUX) .50 CAL. MACHINE GUN & 360 DEGREE MOUNT W/ AMMO BOX
ORIGINAL 6 VOLT SYSTEM WITH FLOOR START.HARD HALF TOP WITH DOORS AND WINDOWS,REAR CREW BENCHES,FRONT WINDSHIELD SWINGS OUT AND BRACES WORK.NEW GLASS IN FRONT WINDSHIELD & DRIVERS DOOR. MARKINGS TO RESEMBLE MILITARY POLICE
NEW :SEAT COVERS,STEERING WHEEL COVER,TOOL BAG,MIRROR,SHOVEL & AXE.
*NAVY SEABEE-MADE :REAR BENCH SEATS,ALL SEAT COVERS & HEADLIGHT GUARDS. . . More on eBay”
UPDATE: Price dropped to $2500. Seller says he must sell by July 15th.
“M170(cj6) Got sell by 15 of July I have over $3000 in parts . New brakes System All new wiring, carburetor, shock, Rad. and much more, 95% no rust, rebuilt eng, trans, and tranfer, new pinion seals front and rear. The Veh. is just like a M38A1 Jeep but longer still need some work must sale cash only no email call my at 706-315-9115”
UPDATE: **SOLD** Was $3800
This appears solid.
“Willys wagon with a Chevy 350 that was professionally rebuilt about 40K ago, 3-speed manual transmission and Dana 18 transfer case. Front and rear axles from a 1989 Grand Cherokee with 323 gears. It will go down the highway at 80 all day. Rear axle completely rebuilt, dual exhaust, edlebrock carb, power steering electric wipers. All gauges work, excellent heater with large auxiliary heater behind passenger seat. New brakes all around. I bought if from the mechanic who did the conversion. He used to haul parts from Ennis to Bozeman. It has minor rust at the bottom of tailgate and behind the drivers door as shown in the pictures and the windshield is cracked. I had plans to do the minor body work and paint it but you know what they say about plans. It needs nothing mechanically.”
This has been previously installed.
“EEP CJ 5 Tub , Hood Fenders, front grill, and other misc. parts. Tub , fenders, hood and grill are all seperate pieces and are not bolted together just set therm in place for pic. Tub Will Work for 1955-1975 CJ5, The hood and fenders will fit 1955-1971 CJ5 or CJ6. Both fenders have a 3-4 inch crack from front tires hitting , can be easily repaired with $10.00 fiberglass repair kit from auto parts store. The tub is solid no cracks some scratches in the paint and just cut outs for pedals and shifters, hood is in good shape no structual flaws. This was a mud toy for me so there are surface scratches. Overall in good shape if you dont care about cosmetics assemble and go if you want nice paint job it is the right price for the project. If you have any questions or want to see in person call 8106899979”
There seems to be some value here.
“’48 Jeep Willy’s CJ-2a flatfender
Has a fair amount of rust, but not gone yet.
I’ve had it running and driving last year.
*** No Title ***
$500
612-685-62 one three”
No pics provided. This should be near me somewhere.
“Complete (tub, fenders, grill, windshield frame, hood, and tailgate $1200 obo
Call 727-2223”