Gregory is near Tulsa OK and looking for some CJ-3B seat frames. If you have a set you want to sell, he can be contacted at
gdisal@yahoo.com .
1954 CJ-3B Dumas, TX **SOLD**
UPDATE: Was $2500. **SOLD**.
Drive train needs work.
“NO PAYPAL !!!!!! I don’t have the title 1954 jeep Willy’s CJ3B it has original Willy’s Hurricane motor it does turn on but will need to be over hauled main bearing are out on crank shaft it has original T90 transmission and transfercase those will also need rebuilt. It has three kc light on top and vynil cover. Frame and suspension has been overhauled but not recently but in good shape.
1952 CJ-3A King City, CA **SOLD**
UPDATE: **SOLD** Was $4500.
Something odd has been done to the fenders, but there isn’t a real good shot of them.
“FOR SALE 1952 Willy’s 4×4 jeep, 8000lb wench, vacumm hydralic brakes, 4 cylinder, soft cover, extra flathead engine and radiator, fairly new tires. $4500.”
1946 VEC CJ-2A Mena, AR **SOLD**
UPDATE: **SOLD** Was $1500.
Not much ‘VEC’ left, but is serial number 19765.
“1946 willys cj2a jeep with extra parts. Does not run needs fuel lines and starter. Motor is not locked up flat head four. Wanting to trade for atv ,bang, bike or something worth 1500 dollars have title in hand. Send a pic of what you have and a number where you can be reached Thank You.”
1948 CJ-2A Lead, SD $6500
No pics provided.
“Very nice willys jeep. runs great, everything works. A must see. call or text: 605-642-4952. Ask for Joe.”
1950 CJ-3A Sussex County, NJ **Status Unknown**
UPDATE: Status Unknown. Was priced at $600.
Looks like a parts jeep.
“This is a 1950 CJ3A that I got for parts on a project. The tub is in poor shape. The frame looks to be in good shape with no holes or deep pitting. This was used as a farm vehicle by the previous owner. The engine has not been started in about 1-2 years. I have not had it started since I got it last year so I can not confirm the condition of the engine. The rear axle was taken out to be rebuilt. It is not currently on the Willys but It is included with the sale. I have several additional parts included with the vehicle;
1. Metal half hard top and doors that cover the front operator and passenger
2. Frame work and hardware for a soft top. ( canvas not with the kit )
3. Windshield Frame ( no glass )
4. 2- small spout gas tanks
5. 1- large spout gas tank
6. 2- Head light housings and bezels.
7. 1- Jeep valve cover
8. Padding for rear seat ( fair- poor condition)
9. 1- Oil pan with skid plate
In no way is this vehicle road worthy or turn key. Like I said before I got this for parts on a project that I can’t complete now due to injury. If you have a project that needs a frame or parts than this is for you. There is no title or bill of sale with this purchase. Also please don’t ask me to break up the parts. This is a package sale.
Thanks for looking.If you have questions please contact me 973-570-7117”
Warn OD + Tranny and TC Hubert, NC $700
OD alone is $450.
“T-14 transmission w/factory adapter from a Dauntless V-6 CJ-5. Was rebuilt two years ago, but has never been run. $200
Dana 18 T-case, also rebuilt at the same time. $150
Warn Overdrive w/ shifter, rebuilt. $450.00
I will also sell all together for $700.”
1955 Wagon Albuquerque, NM $950
Here’s a shortened truck. It’s rough.
“New Mexico truck
1955 Willy’s Jeep Model # L6-226
4 Wheel Drive
105 HP Super Hurricane Flat Head 6 cyl
Rewired for 12 volt conversion
Good 4 core radiator
All (5) original 5 on 5″ with 4.5″ center hole 15” Rims
Rear plexiglass is cracked
All other Glass intact with no cracks
Solid body with limited rust
Last ran in 2004 when the truck was rewired for 12 volt conversion. (All working components)
Missing title / Bill of sale made out by previous owner of 15 years (1997-2012) received at time of purchase
More pics here on Flickr
http://www.flickr.com/photos/stevefishel/sets/72157635342498125/
If interested, Please Contact Jerry at 505-328-5387 (no texts)”
1944? Stainless Flattie Santa Clara, CA **SOLD**
UPDATE: **SOLD** Was $15,995
“Year: 1944
Make: Willys
Model: M38 Jeepney
Color: Silver
Transmision: Manual
Drive: Rwd
Engine: 134.2 Ci
VIN: 89127
Mileage: 640
Asking: $ 16,995.00 O.B.O.
Options
4 CYLINDERS
3 SPEED STICK
Stainless steel. new upholstery. 12 volt. new wiring. new brakes. new suspension. new carb. new wheels. original L head engine. new gauges and alarm. this vehicle was chauffer driven for base commander in phillipines. ”
1941? MB? Granite Bay, CA **SOLD**
UPDATE: **SOLD** Was $4500.
(08/18/2013) It has a few updates. It’s missing the steps.
“1941 Willy’s has chevy steering with tilt column, Warn locking hubs, Mustang buckets, reverse steel rims
Call for more info 916-773-0677 May trade for drag car ??”
1954 CJ-3B Sterling, MA $450
It’s a project or parts jeep.
“Good parts or project. Tub is shot and frame will need allot of work. The engine runs well. Been sitting since I bought it a few years back. Plow not included. Has MA title .”
MB/GPW Jeeps and Parts Monroe, WA **SOLD**
UPDATE: **SOLD** Was $10,000.
Nick forwarded this find. The seller wants to sell everything together.
“My father was a very early (charter?) member of one of the first Jeep clubs in the country: the Yakima Ridgerunners (est. 1947). I am 65 and literally grew up in the back of his 1945 Military GPW Jeep. His WW2 Jeep was his baby, meticulously maintained, well-cared for, and always housed in the large barn on his property in Yakima.
Over the years he continuously added to his parts collection, and at the time of his recent death (April 2013) his WW2 military Jeep parts and parts Jeeps occupied a good share of the barn and adjacent shed building. Two of the Jeeps, plus a utility trailer built on Jeep axles, wheels, rims & tires, are titled, but only one is fully operational — his original, mint-condition 1945 GPW. But the WW2 era Jeep parts collection is extensive.
As the Personal Representative of his Estate I am now authorized to offer his entire “collection” for sale for $10,000 FIRM! I have received considerable interest, and several offers, for portions of this inventory, but wish to sell the entire “WW2 Military Jeep collection” in a single transaction, either to a single buyer or a group of buyers, but in a single transaction”
Pasco to Randle on Friday, August 31
As mentioned, on Friday we decided to forgo the 3 1/2 hour trip from Pasco to Seattle for a much longer route (which turned out to be about 12 hours). As you can see in the pictures, the weather was optimal!
We left at 9am. Our first stop was the remote farming town of Bickleton (it doesn’t even have a gas station). However, the town wasn’t always remote. For years travelers past through it as part of their trek from Portland, Oregon, to the Yellowstone Trail and Yakima. After the creation of Highway 97 over Satus Pass, the town’s traffic dwindled (sounds like a Cars movie).
We arrived in Bickleton to find the entire main street blocked off for a car show. We toured the cars, hoping to see a jeep. After looking, we spotted one hidden next to a building. I don’t think it was part of the show though, but we photographed it anyway.
And now for the car show . . .
Jeep Over Entrance at Barbary Coast
UPDATE: Dennis had a good idea: check Google maps. Sure enough it shows the restaurant gone, but the jeep still hanging.
Buz forwarded this jalopy journal thread that includes a picture of a CJ-2A over the entrance of a restaurant called the Barbary Coast in Mexico, Missouri.
1948 Willys Overland Photograph of Models on eBay
Did it rotate in circles?
“Newly printed photo poster on the highest quality photographic paper . Photo poster size is 16 inches x 20 inches , image size may be slightly smaller . Please see scan for exact image . This beautiful poster is a great item to frame and display on your wall! It will fit in a commonly available 16 inch x 20 inch frame . You may buy as many posters as you want for the one shipping charge listed .”
1946 CJ-2A Sturgeon Bay, WI **SOLD**
UPDATE: **SOLD** Was on eBay.
Buzz found this crazy looking CJ-2A.
“1946 Willys jeep with an old school repower. Has a 1950’s flathead ford engine, this jeep ran three years ago but needed a pull to get started. One head was removed to inspect the cylinders. It looks like this motor may have the original bore but is ready for a rebuild. The distributer was removed and is missing. I will throw one in if I can find one in the shed. The body behind the firewall is made of plywood and fiberglass, it was nicely made but alot of the wood should be replaced if you choose to keep it as is. Original jeep dash and front sheet metal is in good condition. The frame is mostly solid but does have some issues at the front of the rear leaf springs and it has been notched for the steering gear to clear the engine. The engine is coupled to the jeep transmission with a rare adapter. Will be sold with a clear 1956 Willys title. The buyer will have 30 days to pick it up, if you send a trailer I can help load.”
1962 FC-170 Bainbridge, NY **SOLD**
UPDATE: **SOLD** Was $5000.
If this runs, it might be a good find.
“To the best of my knowledge this is the correct information. {I am selling it for my husband whom is ill}1962 6cyl/ automatic with plow. It has been outside uncovered for a couple years. My husband said he had it started a year or so ago.”
1953 CJ-3B Chatsworth, CA **SOLD**
UPDATE: **SOLD** Was on eBay.
The 3B was used as the model for the ICON.
“When we decided to launch the ICON CJ3B, the first thing we did was search down a 100% original CJ3B. We did this so we could get to know it a bit, and to digitize the complete structure and establish a starting point for our CAD modeling work. We found this truck in central California, where it had been it’s whole life. This little CJ has exceptional integrity. It has been sitting for a few years, but it fired right up and runs and drives. Please do not expect to jump in it and go on an expedition. It stops, starts and runs, but you should plan for some tinkering. Rare PTO winch. Original paint. No rust on the body. Zero modifications other than the cheesy wiper switch and rear tire carrier, which could be removed with ease. Original California black & yellow plates. You will be hard pressed to find a more original CJ3B. You may find a shiny one, but you can never beat an original because what you see is what you get. ICON/TLC is a licensed California dealer. Buyer will need to pay $100 document fee above the winning bid. Out of State buyers must use professional transporter and provide bill of lading to be exempt from Ca sales tax and fees. In State buyers must pay DMV fees and sales tax. This truck is stored at our facility in Chatsworth Ca. You are welcomed to come visit it. Please bid to win, scammers please go away and do not waste your time or mine! Thanks for looking- J I put together this short video to show you more details. Thanks, JW”
1967 Wagoneer Panel Delivery Bridgeport, PA **SOLD**
UPDATE: **SOLD** Was $9500
Mark listed this rare Panel Delivery Wagoneer at Jeeptruck.com. Rich (the seller) has been working on jeeps for 35 years at his shop.
“VERY RARE! 232 6 Cylinder, 3 speed on the column, 4×4, New Back Dana 44 Rear, Power steering, and brakes, New Radial Tires, Aluminum Wheels, Chrome Bumpers and Grille, 3″ Lift Kit and Shocks, Trailer Hitch. This Panel Truck is very dependable and I would not hesitate to drive this across country. I have spent a lot of money on parts, Too many to list. The only thing this Panel needs is minor rust repair. Only has 15,542 Miles on it.
Will Deliver within 400 miles of Bridgeport PA, 19405
Please call if you have any questions.
Price: $ 9,500”
Unusual Stainless Flattie Knoxville, TN **SOLD**
UPDATE: **SOLD** Was on eBay
(08/19/2013) I’ve never seen a front end like that. Anyone else?
“THIS JEEP WAS SHOWN AT THE 1982 WORLD’S FAIR IN KNOXVILLE, TENNESSEE. THIS JEEP IS GOOD FOR SHOW AND DRIVING. INTERIOR IS ALL BLACK AND THE SEATS HAVE BEEN RECOVERED WITH BLACK VINYL. IT HAS A NEW BLACK CONVERTIBLE SOFT TOP.
THIS IS A ONE-OF-A-KIND JEEP WILD CAT ALL STAINLESS STEEL. IT IS AN EYE CATCHER–GREAT TO DRIVE IN PARADES–TO TAKE TO SHOWS. IF YOU ARE LOOKING FOR SOMETHING DIFFERENT, THIS IS THE VEHICLE TO BUY.”
1947 CJ-2A Evergreen, CO **SOLD**
UPDATE: **SOLD** Was $5000
No obvious rust.
“47 Willys Jeep CJ2A – Flat head 4 cylinder, runs good
Ready for hunting season, asking $5000 (evergreen area)”
FC-170 Parts Poplarville, PA **SOLD**
UPDATE: **SOLD** No Price.
Various parts.
“pto winch,original equipment,with willys mounting bracket,rebuilt transmission,hay bed,new clutch, pressure plate,rims,misc parts,”
CJ-3A/3B Body Panels Moscow, ID **SOLD**
UPDATE: **SOLD**
Here are a couple body panels from the 1970s.
“1952 WILLYS CJ PARTS
RIGHT REAR PANEL $175 OBO
RIGHT FRONT PANEL WITH STEP $150 OBO
ALL ORIGINAL JEEP PARTS BOUGHT IN THE 70’S”
Year? CJ-2A Argyle, MO **SOLD**
UPDATE: Was $800. **SOLD**
(09/02/2013) No title.
“46? WILLYS JEEP CJ2A CIVILIAN MODEL 4X4 HAS CHEVY V-6 ENGINE. THIS IS A PROJECT WITH NO TITLE. IT NEEDS A LOT OF WORK TO BE ROAD WORTHY. RUST IS NOT BAD FOR A MISSOURI VEHICLE OF THIS AGE. DOES NOT RUN BUT WILL TURN OVER AND FLUIDS LOOK GOOD. WOULD BE A GREAT HUNTING VEHICLE OR OFF ROAD TOY. I ALSO HAVE AN ORIGINAL CJ2A FRAME COMPLETE WITH ENGINE AND RUNNING GEAR WHICH IS NOT INCLUDED IN THE SALE OF COMPLETE JEEP. FRAME IS VERY RUSTY, ENGINE TURNS FREE. WILL SEPARATE”
1948 CJ-2A Tub Cle Elum, WA $300
There looks like value here. That’s just like one of my seats, but it has the original cover on it.
“I have a 1948 cj2a tub grille hood fenders and tail gate. Comes with title and collector plates. $300”