Maury forwarded this jeep-related website. It’s not entirely clear to me what the site is about, other than to encourage jeep owners to wave. I always wave in Biscuit, but never think about it in our new jeep.
2 Jeepsters @ the Mecum Auction This Past Weekend
Roger had a chance to move vehicles for the 2014 Mecum Auction in Kissimmee, Florida, this weekend. He reported that a 1948 Jeepster went for $42,000 (blue one below) and a 1950 for $39,000 (red). Roiger says both were perfect, better then new.
Here’s pics of both. First the ’48 and then the ’50.
2 CJ-3A Rear Seats **SOLD**
James has two rear seats from CJ-3As for sale. **SOLD**
1) Rear Seat: Was $495
CJ3a Rear seat frame and original green vinyl cushions in
excellent unrestored condition (no tears or rips). Frame in
excellent rust free condition (just some very light surface
rust).
2) Rear Seat Was $275
‘CJ3a Rear Seat frame, needs a little restoration: legs on
one side are slightly bent and has small bracket welded on
bottom of rear legs.
1953 CJ-3B Pendleton, OR **SOLD**
UPDATE: **SOLD** Was $2000
Still a bit of a project, but appears close. This is about an hour from me. Phone number in ad.
“1953 CJ3B, F head motor with 12 volt alternator, Saginaw steering, 11 inch brakes with all new hardware, has stock seats, roll bar and comes with an agri jeep bed extension. Have drove around the block a few times, but needs to be wired and finished to be road worthy. Clear title in hand.”
2 FC-170s and 1 FC-150 + Parts in Bakersfield, CA **SOLD**
UPDATE: **SOLD** Was $10,500.
The seller wants to sell this all together.
“Hello, I have a barn full of FC 150-170 parts for sale. Also have two FC 170 and one FC 150. The one is a service truck with duelies and the other is a flat bed that is a fix r uper . Also have a rare FC 150 thats fair shape. Lot of spair doors, axels, and just overall PARTS!!! ALSO have a trailer thats made from a FC170 bed that looks great. Wil not piece out. Need to sell all. As one Bundle 11,000.”
1956 Wagon Terre Haute, IN **SOLD**
UPDATE: **SOLD** Was $5000
It looks solid panel wagon. Needs some work.
“1956 Willies Jeep,runs and drives needs brake work.Call for more info”
1946 CJ-2A San Antonio, TX **Status Unknown**
UPDATE: Status Unknown. Was $3800.
Those old Ridge Runner tires look good from the side. They are supposed to be new, but they can’t be too new.
“A 1946 jeep willy has new tires rollbar rims seats front and back, in really good shape no rust has a 4cylinder carberated, needs radiatior and gas tank motor runs has 4wheel drive was painted 5 years ago still looks good. 3800.”
1952 M-38A1 Central Minnesota **SOLD**
UPDATE: **SOLD** Was $4500.
“It appears pretty solid and complete. I believe this was recently painted. (Here’s an earlier version before the paint)
“1952 M38A1 4×4 Military Jeep”
1948 CJ-2A Smethport, PA $4800
I assume this runs and drives?
“1947 willys jeep (cj2a) 95% restored to military style. Contact me for pics and all other info, Thanks Randy”
1948 CJ-2A Newnan, GA **SOLD**
UPDATE: **SOLD** Was $2300.
“The jeep has been in the family since 1962 and it has been kept under cover except for a couple years. I had a custom made car cover over it most of the time it was not under cover. The top is fairly new and still in very good condition.”
1947/48 CJ-2A Oklahoma City, OK **SOLD**
UPDATE: **SOLD** Was $1800.
It’s a project. It may be pretty solid, but It sure looks like there is some rust to me.
“This is a project that I cannot complete due to health reasons. Needs lots of TLC; electrial; fuel tank. Engine has been rebuilt (hurricane overhead valve engine) . Body in good condition; no rust. Asking $1800.00 will consider all offers. Tag and Title is up to date”
1950 CJ-3A Marlborough, CT **SOLD**
UPDATE: **SOLD** Was No Price.
Looks pretty rough in the rear.
“I have a 1950 jeep cj with a ford 8cylinder 289 that runs strong. Jeep comes with a working plow. Needs brake work and possibly a clutch.”
1946 CJ-2A Southern New Jersey Make Offer
There appears to be some value.
“This is a 1946 CJ2A Willys jeep. Needs to be restored. It has a title. Make an offer!”
1947 CJ-2A Sartell, MN $4000
No pics provided. Seller listed it as a 1947 CJ-3A, so could be a 3A.
“I have a 1947 Willys CJ3A that would be a great summer project to rebuild. Transmission is in working order and engine has no cracks and needs to be rebuilt. Body also needs new tub and the frame is in perfect shape. Original seats included. Asking $4,000.00 or best offer. Call to see… 320-290-8302. Ask for Pete”
Willys Parts Glen Lyon, PA
Just the one pic.
“Willys jeep parts
M38
Cj2a
Cj3a
Tailgate no rust $65
Windshield frame $75
Steering parts all tie rods $40
Front axle drum to drum $65
Text 570-902-5031
Other parts available”
1946 VEC? CJ-2A Salinas, CA **SOLD**
UPDATE: **SOLD** Was $2400.
(10/17/2013) Here’s an old ranch jeep.
“1946 WILLYS JEEP A TRUE SURVIOR. WAS ON A RANCH IN SOUTHERN CA FOR ABOUT 40 YEARS. HAS THE A GPW 4CLY ENGINE. IT APPEARS TO BE ORIGINAL. AND IT RUNS. HAS NON OP WITH PINK SLIP. HAS RUST ISSUES AND NEEDS TOTAL RESTORATION. BEST OFFER POSSIBLE TRADE.”
1975 J-10 Truck Phelan, CA **SOLD**
UPDATE: **SOLD** Was $1400.
(11/15/2014) Are there many J-10s with utility boxes?
“Truck runs but needs tune up. Truck was setting for 10 years. Put battery in it and changed oil. Started right up.”
1942 GPW Hanover, PA **SOLD**
UPDATE: **SOLD** Was $1300.
“I have a 1942 Ford Gpw army jeep… frame and axles are there and together. engine is a later model cj motor however the transmission and xfer case are there and so are tool box lids data plates etc.. gauges etc. motor is torn down for rebuild. the tub is in rough shape as she is a barn find. awesome project I just have too many. I have the. front clip as well hood etc its just not pictured…”
1951 CJ-3A Skull Valley, AZ **SOLD**
UPDATE: **SOLD** Was $2500
(01/14/2014) Unsure if it runs. Must sell.
“Moving and can’t take it with:( Bought it as a project and haven’t had time to finish. 1951 Willy Jeep with a Buick V-6 engine. 3 speed transmission.”
1952 CJ-3A Valley Springs, CA $14,000
UPDATE: Still Available
(11/10/2013) “1952 CJ3A Willys Jeep
Nicely restored in 2004. Body off restoration, new tub, professional paint job. I have driven about 20,000 miles since the restore, all back roads and highway. I restored to show at local car shows and enjoy putting around in the Mother Lode area of Sierra’s. New tires, runs great, very reliable. There is an original Ramsey Winch with spool, a rear power take off unit to run it, also works great. Clean California registration and Title. Must see to appreciate. Please call for details of the restoration. I will consider reasonable offers.
Serious phone inquires to;
(209) 772-1559”
1948 CJ-2A Perrine, FL **SOLD**
UPDATE: **SOLD** Was $3000.
(12/31/2013) Not perfect, but might be worth a look.
“1948 Willys CJ2A for sale 3000 obo.
Jeep has new tires, fuel system, brakes, carburetor, seats, and extras.”
Belgium Military Photos From Charles
Charles hunted down these Belgium related military photos. Some are from 1954 and celebrate Belgium’s “Can-Do Too” spirit. This is Padre Van Der Goten’s jeep.
It’s a Mad, Mad, Mad, Mad World
Robin found a great short clip of the Willys Wagon that appears in the movie “It’s a Mad, Mad, Mad, Mad World“. I remember watching this movie as a kid, because it was one of my favorites. It’s a bunch of silliness.
1950s Photo of Broken Jeep on eBay
Poor jeep.
“These 2 1950’s snapshot photos were taken by a soldier in the 28th Infantry Division 899th AAA Bn. in Germany. The photos show a wrecked jeep and some soldiers. Painted on the front bumper of the jeep is “28 899 AA”. The photos measure approximately 3 1/8 x 4 1/4 inches.”
Thickness of an M-38 Frame?
Neil has some concern about the rust on his frame and wondered if anyone knew what the correct thickness of a M-38 frame should be. I did some searches, but I couldn’t find anything.