Longtime readers will remember the 2011 post about Randy and his boys’ jeeps. Randy shared how the three of them turned basketcase jeeps into viable, modified vehicles. They continue to drive and jeep them in Idaho. Since we last check in with them, they’ve made some updates to their jeeps. Randy describes the changes below (thanks for taking the time to write this up Randy!):
Randy’s 46, CJ2a (blue):
In the winter of 2012 Dusty and I swapped in most of the running gear that was originally installed in his Jeep when we built it in 2004. We Installed the Buick 231, radiator, transmission, exhaust and drivelines. I did a Saginaw power steering upgrade and installed disc brakes on the front axle as well. The springs were re-arched and Bilstein shocks were installed. In order to make room for bigger tires I opened up the back fenders about 3 inches behind the tires and moved the rearend back 1 ½ inches. The fender trimming is not noticeable unless there is a stock Jeep around to compare it to. Last spring I purchased a new set of 37 x 13.5 x 15 Super Swamper Truxus MT radial tires and mounted them on the 15 x 10 Mickey Thompson aluminum wheels that were originally on Devon’s Jeep. Those tires made an unbelievable difference when running in the snow. I usually air down to about 3.5 to 4.5 pounds of air pressure and didn’t have any trouble losing tires off the bead on our snow runs.
This past year I installed a set of suspension bucket seats made by Corbeau that are designed for use in a side-by-side such as a Yamaha Rhino. They have the same dimensions as the Jeep seats that Corbeau makes but the bottom of the seats are shorter which makes it easier to get in and out of the Jeep. I also notched the front of my rear inner fenders and moved the front seats back about 2 inches. Seat heaters were installed in the new seats as well. It is a lot more comfortable to drive now.