To Top

Builds: Smitty’s 1959 CJ-5 “Tinker Bell”

• CATEGORIES: Builds This site contains affiliate links for which I may be compensated.

smittys_willysAs a part of Crystal Tours, Tinker Bell is one of the official tour jeeps.  Restored a couple years ago, Smitty documented some of his efforts.  Smitty has restored several jeeps and operates Smittys Willys Online, where he writes about his restorations, his trips and restoration advice.  Below is some info about his CJ-5 rebuild, but he also has a 1954 CJ-3B and a 1964 CJ-6 he has or is rebuilding.

On his website about the CJ-5 he writes, “The restoration work was started in August 2005 and substantially completed nine-months later in May.  During that period seven-months labor and about $4,500.00 in parts and material was devoted to this restoration.  The job took longer than expected due to the deteriorated condition of the body, and me — relearning the restoration trade and techniques, and reading everything available dealing with old Jeeps and their restoration.  This Jeep is a RESTO-MOD.  It’s a stock chassis and drive-train with minor modifications in the electrical, brake system and body….”

smitty_cj5_marble

To Top

1967 Mark IV? CJ-5 Skandia, Mi No Price

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

One of our reader’s thinks this might be 1 of 89 produced according to the early CJ-5 Page based on these links (1) Production numbers http://www.earlycj5.com/technical/engines/ (2) If the Dauntless is stock it would be a 67 http://www.earlycj5.com/technical/engines/

Here’s the Ad description “I think it is a 50 are 51 not sure it ran when parked now froze from siting wouldn’t take much to get running again all runing gear is there body wise just hood grill no title.
Make offer! 906-235-0069”

http://up.craigslist.org/pts/1303352960.html

cj5_skandia

To Top

Builds: Dan updates us on his Grandfather’s Jeep

• CATEGORIES: Builds, Features This site contains affiliate links for which I may be compensated.

This is a continuing series on Dan’s efforts to rebuild his Grandfather’s jeep. Here’s the previous post. [Editor’s note – that looks like a steal at $100.  Running and complete!]

Dan writes, “Sometime in the 1960’s my grandfather’s friend purchased a new Jeep and immediately swapped out the little four banger for a V8. My grandfather bought the new (at the time) 134 F head from his friend and installed it in his own 1955 CJ5 replacing the tired original 134. Over the years this second engine was rebuilt three or four times.

V6-2At one point in time my grandfather had a V6 of some kind sitting in the garage that was supposed to go into the Jeep. Unfortunately when he made the move from Colorado to Washington State, the V6 was left behind.

Today I just came home with an engine for the old CJ5. It’s a Kaiser odd-fire Dauntless V6. I found it behind a barn in a Jeepster C101 sporting a Volkswagen Bug body. (It was the ugliest “Jeep” I have ever seen). But the engine was still in tact and was running when parked. I made the guy an offer for $100. He pulled the engine and had it sitting on a pallet for me the next week. I took home everything from the radiator to the bell housing. He wanted the transmission which is fine with me. Someone had painted the valve covers red but you can see the original paint underneath. There was a power steering pump scabbed on which I will remove since I have a manual Saginaw box. It will be nice to breath the life into the CJ5 that my grandfather had wanted.

V6 Valve-Cover-StampingOriginally, I had responded to a Craigslist add for a set of fenders. As it turned out I came home with a set of front fenders, a nice Koenig steel hard top model 550, and a Dauntless V6. He still has a Koenig PTO winch that I’m drooling over, but they don’t fit too well next to a Saginaw box.

I have attached a few pictures of the V6. In one of them you can catch a glimpse of the old CJ5 in the garage.

V6 Intake-Casting

V6-1

To Top

1963 CJ-5 Fairfield City, NY **SOLD**

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

1963_cj5_fairfieldUPDATE: **SOLD** Was $1550.

Here’s what appears to be a good price on a running, low mileage CJ-5 with a plow.  I’m not sure how it got so much rust if it was garaged for 44 years.

“1963 Willy’s Jeep with plow, 29,540 miles, Garaged for 44 Years! Complete and Original Engine
Convertible Top and Doors, Body sturdy (good amount of rust), Engine Runs Terrific! Still plowing snow (original plow) and tugging out trees! Happy to provide more information”

To Top

1957 CJ-5 Oswego, NY **SOLD**

• CATEGORIES: CJ5 • TAGS: This site contains affiliate links for which I may be compensated.

1957_cj5_oswegoUPDATE: **SOLD** Was $1500.

“1957 Willy Jeep CJ5, F Head Engine, With working Snow plow and Frame, Add-On Custom Cab model number 535 made by Koenig Iron Works, Houston Texas, Runs and drives.  New parts included for brakes for all four wheels including master cylinder. Need to be installed. Tons of spare parts, and available parts vehicle not included but open for negotiation. 1500.00 or Best Offer
Serious Inquiries only.”

To Top

1960 CJ-5 Newton, Ma eBay

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

Jim provided a link to this jeep.  This is an unusual CJ-5 due to the very low mileage (14,736) and vintage accessories.  I love the old top.

“This is a classic all original 1960 Willys CJ5, garage kept with 14,736 miles, one owner. It is in very good condition with original orange paint and factory plough attachment. It has never been restored but it doesn’t need it. It includes the original soft top, owner’s manual, service manual, and the original receipt (from 1959). Flaws: Rodent chewed a single small hole in the top, approximately 1.5″ in diameter. Seats each have a single crack down the middle of the backrest. Ding on left rear corner. Crack in passenger door plastic window. All of the above are repairable. Other than that, it is in excellent shape. It starts, runs, and drives flawlessly. The original suspension is in good working order. The paint is in great shape. Buyer is responsible for shipping charges, if applicable. Please feel free to ask me any questions.”

View all the pics on eBay

1960_cj5_newton

To Top

1953 CJ-3B Project Glens Falls, NY, $1500

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

1953_cj3b_southglensfallsThis might be a good find.

“$1500 OBO.  1953 CJ3B in the process of being restored. Everything is stock, but the stock axles are not under it (they’ll need new lock-out hubs). Currently it has a set of CJ5 axles under it for moving purposes (included). The springs are brand new Rancho 2.5″ lift springs and new shocks. New front and rear bumper and the frame has been stripped and painted. It’s been pretty well cleaned up and ran 2 years ago when I started the rebuild. Engine still turns by hand. The body is gone except for the firewall, but the data plates are here. Basically, I’m bored with it and have no money. As far as I know, to start it all ya need is a bolt for the block (one of the bolts for the carb is stripped. It’s out, but ya need a new one), fuel lines and electrical. Everything is there, with a spare windshield and windshield frame, early CJ roll bar, and an extra set of gauges for the dash.”

http://albany.craigslist.org/cto/1308033307.html

To Top

1953 CJ-3B Grand Junction, CO **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

1953_cj3b_grandjunctionUPDATE: **SOLD** Was $6200. Lots of upgrades and a slightly stretched body.

“1953 CJ3B Stretched Body on 1977 CJ5 Frame, Fuel Injected, 10K miles on Professionally Rebuilt 401, ARB Lockers, Avalanche Automotive Quarter Elliptic Rear Suspension, Spring Over Front Suspension, T-18 Tranny, Modified Low Geared Dana 20 T-Case with Twin Stick, Dana 30 Front End, AMC 20 Rear End w/One-Piece Axles, Winch, Custom Redwood Dash w/ VDO Gauges, 33×12.50/15 Super Swampers, Bikini Top w/ Safari Doors”

To Top

Buyer for a CJ-5 or Willys Jeep

• CATEGORIES: wanted This site contains affiliate links for which I may be compensated.

Here’s someone from my hometown interested in buying a CJ-5 or Willys that doesn’t need work.

“Looking to buy a Jeep cj5 early years 1973-1978, also interested in willys jeeps to.No auto tranmissions looking for great shape rig send me your details dawgfan54@hotmail.com Location not a issue.Not interested in one that needs work…….Thanks”

http://seattle.craigslist.org/skc/cto/1278043763.html

To Top

1960s CJ-5/6 Ocean Shores, Wa $300

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

1960s_cj5ish_oceanshoresI couldn’t resist posting this unusual and modified jeep.

“I bought an old jeep to restore but it has not happened and I have owned it for over a year. Its stock with a modified bed with safari seats. I just need it to go to a good home so make me a deal and it will be yours. I paid $500 over a year ago. I am ready to sell for scrap so come get it… make me an offer. Ask Questions and I will answer what I can. Thanks.”

http://seattle.craigslist.org/tac/cto/1264797522.html

To Top

1959 CJ-5 Mastic Beach, Ny $800

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

1959_cj5_masticbeachA running, driveable, not too bad looking CJ-5 for only $800.  It looks like a deal to me.

“looks and runs very good needs some minor tlc but for the year its pretty nice and all the canvas doors and top are new. this is a fun little jeep its the cj5.  Call robert
631 885 2551”

http://newyork.craigslist.org/lgi/cto/1268277737.html

To Top

1967 CJ-5 Vashon Island, Wa **SOLD**

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

UPDATE:  this jeep sold and is on it’s way to California.

Here’s an unusual find.  A garage kept, completely original Tuxedo Park CJ-5 with only 67,500 original miles.  It’s been garaged in Montana since new, garaged in Washington the last four years and serviced every year.

1967_cj5_vashonisland

To Top

1962 CJ-5 Eaton Township, Oh $2500

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

1962_cj5_eatontownshipThis project includes a new fiberglass body and fenders.  It also, to my surprise, has some desert dogs with decent tread.  It looks like a lot of work has already been done.

“Mechanical work complete. Finish the body and drive! Mint frame and suspension. Brand new Rancho 2.5″ Lift Kit with Shocks. All new wheel cylinders and master cylinder. All new brakes. Motor mounts and body mounts new. New lock-outs. New universal joints. New fiberglass body & fenders. Tow bar, top, seats, doors. 134F Head, 3 speed with lo range and hi range. Needs paint & assembly, but it’s all there if you want to put together and drive. Could use new windshield frame. Call Gene @ 440-554-2935.”

http://cleveland.craigslist.org/cto/1256651637.html

To Top

1955 CJ-5 Whittier, CA **SOLD**

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

1955_cj5_whittierUPDATE: **SOLD** Was $900 

“1955 Willy’s Jeep CJ5First production year of the CJ5, It’s a pretty rare find It doesn’t presently have a radiator and there is something wrong with the brakes but it has a tow bar that I myself used to bring it home. I have the origional radiator I’m not sure if it’s going to be salvagable or not. It’s to be sold as is I have some additional parts like wiper motors and after market side steps etc.”

 

To Top

1950s CJ-5 w/ Trencher Medford, NJ eBay

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

UPDATE: This is now on eBay

I haven’t seen too many trenchers for sale.

“50’s RUNS!!! : ) Willys Jeep with Trencher and Plow. Has hard top. Needs fuel tank. Was able to pour fuel into carb & start motor. Brakes are inoperable. Questions? Call Nick at 609-668-5541 Thanks for looking! : ) Check out more of our current yard and estate sale items on photobucket at: http://s408.photobucket.com/albums/pp162/sothankful1/Online%20Yard%20Sale%20Items/?albumview=grid Art, Antiques, Furniture, Equipment, Vehicles, Household Items, Decor, Mobile Home, and More!!! We look forward to hearing from you! : ) ”

View the pics on ebay

http://southjersey.craigslist.org/cto/1254073368.html

1950s_cj5_medford

View all the pics on eBay

To Top

1964 CJ-5 York, Pa $1995

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

1964_cj5_yorkThis appears to be a nice looking CJ-5 at a surprisingly low price given it’s a dealership.

“1964 Willys Jeep CJ5, Red with white soft top, 3.8 (gm) V6 with automatic transmission (old conversion), 4×4, Runs & Drives good. Old Allstate locking hubs, aluminum wheels, rear seat, extra set of half doors, Body is in good shape, Great old antique jeep to restore for shows or cool old trail jeep. This jeep does not have power steering or power brakes, it is geared very low so 50mph or so is about top speed with this drivetrain. It is not PA inspected and will not be. It came from out of state. Only $1995.00 Brian Kauffman’s Autorama, York, 717-764-6620”

http://york.craigslist.org/ctd/1250049209.html

To Top

Dan’s Grandfather Transports 2 Horses

• CATEGORIES: Reader Stories This site contains affiliate links for which I may be compensated.

UPDATE: As I wrote to Dan, I spaced and forgot to add links to the rebuild of Dan’s Grandfather’s jeep. We’ve been following the rebuild here and here.  Too much playing with my kids, fixing my mom’s computer, pulling stumps out for dad and the dave-do list is growing …  I think you get the picture.

Dan shared this story with us hoping to encourage other readers to share those oddball stories involving jeeps.  That made me realize I still have a few to share, so I’ll write up a couple and share them as well.  Thanks for sharing Dan!

One day my grandfather decided to transport his two horses in a single axle trailer behind his Jeep. While going down the road he noticed that something was wrong. The engine rpm was increasing, but he was slowing down.

After pulling onto the side of the road and looking things over, he noticed that the horses had moved as far back in the trailer as possible and that was lifting the rear tires off the ground.

He thought about it a moment and, deciding he was already half way there, he put the jeep in 4wd and finished off the trip.

When he was done he swore he would never do that again.

If you have a story to share, please send it to me (d@ewillys.com)  and I’ll likely post it.

To Top

1958 CJ-5 Ogallala, Ne $2500

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

1958_cj5_ogallalaThis seems a surprising price on a nice looking CJ-5.  The tires are a little big for my tastes, but otherwise this looks great.

“chevy v8 new dana 44 diffs mini spool in the rear. top load 4 spd. 38″ tires for sale or make take a trade or partial trade. Call or text to 1-308-289-4832. Have a title for the jeep but can’t find the vin plate.”

http://grandisland.craigslist.org/cto/1247495054.html

To Top

1968 CJ-5 Ephrata, Wa $500

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

1968_cj5_ephrataThis has a nice looking cage, good looking diamond plating, good rims, though the tires don’t match.  It looks like a good price for a parts jeep.  Note the shackle reversal and outboarded back springs as well.   This might make a good foundation for a project.

“1968 Willys CJ 5 project. It has the body, frame, T-14 3 speed, T-18 T.C, Dana 44 “offset” rearend, Dana 30 frontend, rollcage, new motor mounts for a 4.3 V6 or SBC, shackle reversal and rear springs moved outboard, lift springs (spring under), 35″ tires (almost new but dont match) on chrome wheels, warn hubs, So…$500 FIRM for rolling jeep…. no motor OR…………………….

4.3 V6 (temp mounted in CJ) I was told that the motor was built, also has aluminum intake, roller rockers and Mallory ignition. I have Clear title. So…$500 for rolling jeep no motor or $800 with the motor. FIRM on all my prices. Moving and need the cash.  If interested e-mail me at ductapeit@yahoo.com 509-793-3692 Ken ”

http://wenatchee.craigslist.org/cto/1236543753.html

To Top

1946 CJ-2A Harrison Township, Mi $7900

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Price dropped to $7900

This ’46 sports a variety of upgrades.   It looks nice.  Strangely, the front parking lights have been eliminated.

“1946 willys, california car, ’74 350 corvette engine, 4 speed manual trans, ’74 cj5 running gear, 44 dyna rear, 30 dyna front, all gauges work, body in good condition, no rust, newer Best Top with soft doors, dual fuel tanks, Ramsey Pro 9000 front mount winch, roll cage , dual KC running lights, Deist seat/shoulder belt system. 5 new BF Goodrich 33×12.50 R LT tires, 5 used chrome wheels, 4 new 15 Champion bead lock C2 rims,
contact Chuck @ 586-463-6150 ”

http://detroit.craigslist.org/cto/1243061645.html

To Top

Jim’s Camo Seat Cushions

• CATEGORIES: News • TAGS: This site contains affiliate links for which I may be compensated.

Jim sent out a some images of his Camo Seat Cushions this evening.

He writes, ” They fit CJ2A CJ3A CJ3B M38 M38A1 M606 Early CJ5 CJ6.   Note:The set of seat cushions in the picture are not screwed in place, just set up to show you what they’ll look like installed. Once screwed into the seat back, fit will be tight and correct”

misc-462

misc-467

misc-468

To Top

Builds: Dan’s Grandfather’s CJ-5 Part II

• CATEGORIES: Builds This site contains affiliate links for which I may be compensated.

You’ll remember we first met Dan and his CJ-5 from his discussion of his Hudson Steering to Saginaw Swap.

Dan has provided us with some additional coverage of the resurrection of his Grandfather’s jeep.  This might just become a series :-).  Besides, I’m a sucker for anyone will to take the time to breath life into the family jeep.  There’s plenty of people who would have junked this CJ-5.  Thanks for sharing Dan!

Dan writes, “One of the great things about a Jeep project is that you can work on all the little things while you save up for or look for those parts for the big jobs. Here is a brief look at some of my smaller repairs.  First, here is the project Jeep. A 1955 CJ5. [editor’s note:  the front shackles were reversed on this CJ-5 which produced some understandable discussions about whether this was actually a M-38A1.  Clearly it’s not :-).]

more_cj5

Starting with the gas tank, after cleaning all the surface rust off of the gas tank, I discovered a series of little holes. Now you can easily find an after-market steel or plastic tank, but for about $5 I may be able to fix it.

more_cj5_1

Here is the gas tank all cleaned up and patched with epoxy (JB Weld).  If it works than I saved about $100. If it doesn’t work, well then it didn’t cost me too much to give it a try.

more_cj5_2

Continue reading

To Top

Builds: Dan replaces the Hudson with a Saginaw

• CATEGORIES: Builds This site contains affiliate links for which I may be compensated.

Sometime back, Dan’s grandfather had replaced the stock CJ-5 steering with a Hudson steering mechanism.  However, the bell crank has seen better days, so Dan decided to upgrade to a manual saginaw.  Upgrading to the manual saginaw is rare these days (see various steering upgrade options here), so it’s a nice treat to have Dan document his work for us.  Thanks Dan!

Dan writes:

Here is the Jeep soon after I picked it up from my grandfathers old ranch. I had already started to disassemble it. It’s a 1955 CJ5 which he purchased in 1959. About ten years ago he told me that his best guess was that it had about 500,000 miles on it. It has seen a lot of abuse and he made many modifications to it. That’s a Hudson steering wheel and column.

cj5_1

As you can see in this close up, the frame is broken clean in half just in front of the divers side front wheel.

cj5_framecrack

The bellcrank where he relocated it. It was just about ready to literally fall off. All the welds were broken and only one bent bolt was holding it on.

bellcrank_cj5

Continue reading

To Top

1946 CJ-2A Clinton Township, Mi **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $7888

Here’s a pretty nice CJ-2A with an early ’46 body.  It’s got a number of updates.

“1946 Jeep Willys  -Califonia car -’74 350 Corvette engine -4 speed manual trans
-’74 CJ5 running gear -44 dyna rear -30 dyna front -All guages work -Autometer tach – all guages work -No rust, -Newer Best Top with soft doors -Dual Fual tanks
-Ramsey Pro 9000 front mount winch -roll cage -Dual KC running lights -Deist seat/shoulder belt system -5 new BF Goodrich 33×12.50 R LT tires”

1946_cj2a_clintontownship

To Top

1966 CJ-5 Graham, Wa **SOLD**

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

1966_cj5_grahamUPDATE: **SOLD** Was $1250.

“1966 Jeep CJ-5 factory stock Buick V6 and headers. Stock running gear 3.73 diffs. Running gear is intact and not broken. No bondo. No rust holes. Has not been wrecked. No frame cracks. Solid tub has been sand blasted bottom and inside. Swing away spare tire carrier. 6 point cage. Has been in my garage for 8 years. Ran and drove when parked. I began collecting new and used parts off and on with the intention of making a streetable rig. Good for some mild weekend wheeling. Some parts mocked-up on the chassis are GM Saginaw power steering with tilt column. AMC type rear mounted fuel tank includes filler cap insert (still has stock tank under seat). AMC type heater box. Other parts included are: locker spool for rear diff, GM (Blazer) front disc spindles, door frames, Rancho 1 1/2″ springs and shocks. 1″ shackles. Aluminum 15″ wheels. New parts: Spring bushing kit, rear diamond plate, LED taillights, body mount kit (stock height), windshield seal/frame to cowl seal, pedal rubbers, shifter boots. The only body damage is very minor on right front fender. Surface rust”