Doesn’t run.
“fresh from the barn ,parked in 1975 ,no title but the old dude will apply for a duplicate if someone
pays and helps with the forms ,i havent started it yet but i know it will you cant kill these old dogs
43,000 mi ,ran when parked”
Doesn’t run.
“fresh from the barn ,parked in 1975 ,no title but the old dude will apply for a duplicate if someone
pays and helps with the forms ,i havent started it yet but i know it will you cant kill these old dogs
43,000 mi ,ran when parked”
Looks like a 2A top to me.
“soft top with doors and frame pieces. off of a 1946 willys cj6a. fair condition, doors are almost perfect.no vinal in side windows, no hinges,no mounting hardware,has oval type grommets for 1/4 turn twist locks. something good to start with or use for the summer.will fit many other year jeeps.”
It’s a project that includes a rear PTO.
“I have a 1946 willys jeep, started on the tear down to start a resto-project, now I’m going with something newer. Body is spent, frame repairable but comes with a CJ3A frame . motor turns free, rear pto set up, decent fenders ,hood, and windshield frame, and for the best part, it comes with a clean Massachusetts title.”
Here’s a hard to find motor. No description of condition.
The body is fiberglass.
“1946 Willys Jeep Not running No Spark Jeep has been sitting Fiberglass body”
http://longisland.craigslist.org/cto/4696540400.html
UPDATE: **SOLD** Was $5250.
Variety of parts.
“This is a 35+ year collection of new old stock body panels. I have the front and rear floor pans, rear quarters with inner panels already spot-welded in place, CJ3B front quarters, (piece can be removed to convert to CJ3A). Also included is a N.O.S. 3A grille, N.O.S. 3A hood, N.O.S. tool box, a used windshield and used gate. This package also includes a donor JEEP that is a CJ3A with a very clean frame with straight frame horns with no extra junk welded on and it’s not rusted up. You can’t buy these parts in O.E.M. without spending another 35 years searching. This is not imported junk. Please email for an appointment to take a look at the collection. It is located about ten miles east of Hershey, PA.”
UPDATE: **SOLD** Was $4500
Looks like it might run.
“Looking to sell my original 1944 Jeep Willy MB, have title in hand asking $4,500 OBO. Anymore questions feel free to email me!”
Today the four 1956 Willys Newspapers in the mail I won on eBay arrived. There is lots of great stuff, both photos and interesting stories. I’ll be sharing them all in the coming weeks.
This first article from the page seven of the June-July 1956 issue tells the story of a retired couple by the name of Hawkins who readied a caravan for some cross country exploration. At the head of the caravan is a Fleetwood Caddillac. It pulls a camper-trailer that pulls a CJ-3B carrying a boat. Looks like they were ready for anything!
Bill Shaw is looking for some five lug tires for his 1/2 scale jeep project. If you comment below, I’ll make sure he get’s your info. Here are a couple links I found:
http://www.etrailer.com/Tires-and-Wheels/Kenda/AM30000.html
http://www.amazon.com/Kenda-Trailer-Tire-Wheel-Assembly/dp/B000GU40A0/ref=cm_cr_pr_product_top
Bill writes, “I am working on a ½ scale jeep, mounted on a John Deere garden tractor. The engine fits well and I am now working on the axles which I am lowering 6” (if you look on-line, most of these projects have an odd out of kilter high on running gear look). We (my son-in-law, grandson and I) are looking for 4.80/4.00-8 military looking non directional tread tires, 5 of them. If anyone has a lead please let us know – Kanda used to make them, I think. The photos are of a correct size wheel in place, the engine (just fits) and the front steering axle as I am lowering the spindles. We are going to use 5 lug trailer spindles and hubs on the front and on the rear I am going to modify 6” chain sprockets with wheel lugs for the drive axle.”
Scott has been testing the creation of small jeep parts using a 3D printer. He’s hoping to find options for the type of parts that aren’t sold by vendors. For example, you can see the wagon slider window and rear ashtray knobs he produced below. He tells me the 3D knobs he has produced look and feel like the real ones. You can see examples below that he’s made in different colors.
He’s also testing out the production of other small parts, including ones with a true chrome finish. If anyone has any ideas about hard or impossible parts to find, feel free to comment below.
Has potential.
“Selling 1942 army jeep. Mostly complete and doesn’t appear to have any major rust. Engine is original flathead jeep 4 cylinder and has transmission and transfer case still in vehicle. Have title. Doesn’t run at the moment as it has been sitting for a few years but did run when parked. Text with questions.”
Lots of updates.
“FOR SALE:
1946 Willy’s
• NEW 74 -231 V6 Engine (72 Miles)
• Chevy 350 Transmission and B & M Shift Kit
• T-18 Transfer Case
• 4:10 Gears Front and Rear
• NEW 33×12.50 15 General Grabber AT2 Tires
• Electric Cooling Fan
• 5K Winch
• 10″ Brakes all around
• Rugged Ridge Side Steps
• Built In Cup Holders
• Swing Out Tire Carrier with Jerry Can Holder
ASKING $10,000 OBO
SERIOUS INQUIRIES ONLY!!”
Mostly stock. The bumper is unusual.
“In working condition – rewired, new brakes and tires; new seats.”
http://tucson.craigslist.org/cto/4702256334.html
UPDATE: **SOLD** Was $13,950
I purchased this 1951 Willys CJ-3A from a Willys enthusiast in Prescott, Arizona. At the time, I planned to buy a cabin in Prescott and store it there, to enjoy on weekends. My plans changed, and the Willys is in my garage in Phoenix. I am not able to use it like I planned. I love the little thing and don’t have to sell it, but someone should own it who can use and enjoy it as these vehicles were meant to be used and enjoyed.
Here is the March, 2013 ad to which I responded:
Continue reading
UPDATE: **SOLD** Was $12,500
Nice looking truck.
“1953 Willy’s Jeep pickup truck for sale. 4×4, converted to 12 volt, engine hurricane 6 – 3 speed with hi/lo and overdrive.”
UPDATE: Was $3750. **SOLD**
“I have for sale a running Jeep willy CJ2A. Live PTO. Needs some restoration but can also drive the way it is!”
Seller notes it needs body work, but nothing obvious based on the pics.
“1953 CJ3A For Sale Or Trade. Jeep Has A 1966 289 V8 In It. It Runs And Drives Just Fine. Could Use Body Work Rust On Fenders And Hood”
UPDATE: **SOLD** Was $6800.
(08/13/2014) Appears solid.
“1946 Jeep Willys first year civilian for sale. Has been partially restored. The speedometer needs to be replaced. Runs and drives great! Clean title in hand. New electronic distributor, new carburetor and rebuilt starter.“
UPDATE: **SOLD** Was $6800
Strangely, it looks like this is set up for a rear tank, but I don’t see the actual tank inlet.
“4X4 1946 WILLYS JEEP for sale. Looks good runs great original engine has an over drive no rust. Real head turner.”
UPDATE: **SOLD** Was $20,999
“Professonally rebuilt from the ground up. 1948 Willys Jeep. Motor, transmission, transfer case and both axles completely rebuilt. New brakes, new clutch, new brake lines, new exhaust, rebuild starter, rebuild carb, new water pump, new fuel pump , new shockes, new alternator, new clutch, new steering system, and New American made firestone Military tires on freshly bead lasted and powder coated old stock rims. Newly bead blasted body parts primed and painted stock blue color. Tub and tailgate are new from Omix built to OEM specs and I must say they are. Went with 3a tub instead of 2a in order to upgrade and gain extra 2″ of seat room between steering wheel and seat back. All new wires, gauges, cables and controls. Old stock seat frames refinished and recovered. All new rubber and all new glass.”
UPDATE: *SOLD** Was $1250.
This runs, drives, and includes a PTO. It’s got cancer, but a body can be had pretty cheaply.
“1959 Willy’s Jeep for sale. As shown in the pictures the jeep has quite a bit of cancer. The Jeep is a 3 speed manual transmission with a PTO Winch. It runs and all drive train is in great condition.There are all kinds of aftermarket parts for these style jeep’s.”
Runs, but body is rough.
“1946 Willys Jeep
Rebuilt engine & drive train
Needs body parts
Frame Restored”
UPDATE: **SOLD** Was $2000.
Runs. Has no title.
“1953 Willys Jeep. Has had a V6 put in and converted to a 12 volt starter. Runs great, starts right up. Warn winch. Newer front hubs. Has typical Jeep rust for its age. Solid old jeep. No title but shouldn’t be too hard to get one if you do the paperwork.”
Runs and drives.
“I selling 1952 Willys jeep it runs drives good dose need body work and brakes .i am asking 1,500 obo I am willing to trade and some cash only people really interested”
http://springfield.craigslist.org/cto/4689952339.html