This issue is easily dated.
Wagon Model Carved From Wood Block (+ Video)
UPDATE: Here’s a video of the artist at work:
=======================
Homeskoold Customs on Facebook shared this really cool carving of a wagon emerging from an old post. The artist claims not to be a woodworker, but he is most definitely at artist!
https://www.facebook.com/photo/?fbid=489893496631750&set=a.412736887680745
Odd MB Shared on FB
Roger Martin spotted this unusual 3B on Facebook. There are only two images included, so there is limited info about it. That said, I’m leaning towards this being a home-brew rather than a prototype.
https://www.facebook.com/photo/?fbid=6613665795327673&set=pcb.1838648579838287
1940s Wood Commodities Corp Wooden Jeep on eBay
Roger Martin shared this WWII wood jeep for sale. The lettering is in good shape and the bottom still has the manufacturer’s sticker. But, it’s currently priced at $150.
View all the information on eBay
“1940s Vintage WW2 Willys Jeep WD 63, Wood Commodities Corp W. D. 63 Wooden Toy.
Original WW2 vintage Willys Jeep wooden toy.
By Wood Commodities Corporation.
Marked “W. D. 63″.
Produced during a time when metal was being converted to the war effort.
Measures approximately 10″ long.
This vintage toy is in very good condition with minor wear.
No significant flaws. Just normal edge wear.”
1950 Jeepster Torrington, CT eBay
The auction on this time capsule (that needs a little cleanup) ends today. Thanks to Bill for spotting it.
View all the information on eBay
“beautiful 1950 Willy’s Jeepster vt36,all original , recently removed from long term storage in the 70’s. One family owned. Went through brakes, fuel system, new fuel pump and tank, new period tires and hubcaps,Ignition system, vehicle is amazingly original, top is ok, has original side curtains,runs and drives excellent. Paint cleaned up.low miles.big 6 cylinder with/Overdrive.If you are looking to be a Jeepster family you could bring it back to Cape Cod for the summers, where it spent many summers! It will make a great beach car and car show cruiser”
1962 CJ-5 Minnesota $12,900
Kris is selling his nice looking CJ-5.
“For Sale: 1962 CJ5
Runs great and the body is in excellent shape. Engine has been checked over with new rod and main bearings installed. Comes with original oem top bows, no top.”
1973 DJ-5 Jeep Rod St Helens, OR $6000
This is a different take on the DJ-5.
https://www.facebook.com/marketplace/item/1587812408335285
“1973 2Wheel Dr. mail jeep right hand steering runs and drives”
1946 CJ-2A Holbrook, PA $2000
This has a Porter & Reed hardtop.
https://www.facebook.com/marketplace/item/729214582203036/
“Has title, ran when parked”
5 Kelsey-Hall 5×5.5 Wheels San Jose, CA $1000
Harman’s selling these wheels.
https://sfbay.craigslist.org/sby/pts/d/san-jose-kh-willys-wheels-5×55/7585012731.html
“5 15″ Kelsey Hayes wheels with tubes off my CJ2A. I believe these are the ones that are getting hard to find. They will look nice cleaned up, however, this does not fit my application. Only 4 pictured but I have a set of 5. Please text me if interested.”
CJ-2A And Other Parts Kennewick WA $2500
No pics, but a very extensive list.
https://www.facebook.com/marketplace/item/561205192539722
“Would like to sell whole lot for $2,500 – would consider parting them out.”
1966 CJ-5 Tuxedo Park(?) Wausau, WI $2750
Seller will consider offers. There is at least some parts-value here. If it is a Tux Park, it lacks the branding on the hood.
https://www.facebook.com/marketplace/item/541611031358517/
“REDUCED, here it is 1965 CJ5 Jeep Tuxedo Park Hardtop. You can see what it is I have the doors seats and gas tank it is my Father in laws so there might be more parts comes as is with the original snow plow was registered till the early 90s i think someone was going to replace the floor boards and didn’t. Can still get it out of the snow if interested. Please make an offer”
1951 CJ-3A Lewiston, ID $3500
UPDATE: Still Available.
(10/13/2022) Has some rust. Doesn’t run.
https://www.facebook.com/marketplace/item/503401795128605
“1951 Willlys CJ3A jeep 4X4. Ran when parked. $3500 cash, no trades.”
1959 FC-150 Killeen, TX $5000
UPDATE: This may still be available.
(11/29/2022) It’s a “will run” situation; unclear if it needs anything to run.
https://www.facebook.com/groups/835668236472205/permalink/6078531655519144
“1959 fc150 with title. Have original service manual. All original. The i4 hurricane will run. Located in killeen, tx $5k”
1947 CJ-2A Yakima, WA $15,500
UPDATE: Still Available.
(0823/2022) This has a leather interior.
https://www.facebook.com/marketplace/item/390031836576414
“’47 JEEP WILLYS CJ 2A Collectors Dream
2-Owner
(Father/Son Collectors), 327, 3speed w/overdrive Reconditioned, Low Mileage, Custom Paint & Chrome.Full Cage Roll Bars, Full Soft Top, Full Doors & Half Doors, Nice Interior has Leather Seats & Carpet. Locking Front Hubs. Clean Title. Asking $17,500 obo (All Reasonable offers considered) Located in Yakima”
1974 Winter (Jan-Feb?) Jeep News
1967 Jeepster Convertible Lawrenceburg, IN $10,000
This looks like a good price.
https://www.facebook.com/commerce/listing/732417875108065
“10,000 OBO
1967Jeepster, 4 wheel drive, Dauntless 225 V6, odd fire, 3 speed trans. Factory power top. Has 1971 Dana 44 rear end 3.73 gear. Solid vehicle. Everything works, gone through mechanically, very dependable. All wiring gone though and fixed.
New
Convertible top
Gas tank & fuel lines
Brakes and brake lines
Master cylinder
Radiator
Heater core
Windshield
And much more
message with any questions”
1952? CJ-3B Bonney Lake, WA $15,500
This looks like a good build.
https://seattle.craigslist.org/see/cto/d/bonney-lake-1952-cj3b-willys-high-hood/7583527933.html
“Got a 1952 CJ3B Willy’s high hood with a tbi injection 4.3 V6 turbo 350 automatic overdrive 44s front and rear Detroit rear air locker front 538 gears new tires blazer front springs over the top Dodge Rear Springs over the top full cage new aluminum radiator warn winch tow bar stainless grill, stainless tailgate, Ricardo black buckets, all the lights work heater clear title
1964 CJ-3B Sandy Springs, GA $14,500
Nice half soft-top on this 3B.
https://atlanta.craigslist.org/atl/cto/d/atlanta-1964-willys-cj-3b/7581873687.html
“1964 Willys CJ-3B. The last year of the flat fender.
It had a frame-off restoration in 2006, to include a brand new tub. Overall, it runs great, is cranked once weekly and is a great driver. It has NO rust anywhere, which is a very rare find.
It’s not perfect – for most of us Jeep (and Willys) enthusiast, it’s as nice as you or I have seen, but the paint is not show quality. If you’ve been around them, you know it drips some fluids.
It does have a heater and newer canvas, and the interior is in incredible shape (will post more pictures).
What does it need? It currently has a Solex carb with a flat spot (still very manageable to drive). I have the correct Carter carburetor, but it needs rebuilt, which is a $250 or do dollar investment to have done right. It also comes with the PTO winch but does need a shaft.
Come take a look – you’ll be impressed. It comes with a clean title and bill of sale.”
1952 M-38 Aurora, OH $15,000
Greg and Tom shared this Kubota diesel powered flattie. There are no pics of the engine included.
https://www.facebook.com/marketplace/item/496716685953123
“Up for sale is my 1952 Willys M38. This jeep has a Kubota V2203 Turbo Diesel Engine installed with a full kit from Overland Diesel out if Canada. The jeep runs and drives great. It also has the disk brake conversion from Brennans Garage. It has a T90c transmission and a lock rite locker in the rear. It has led headlights, aluminum radiator, full 2 inch exhaust, new shocks etc, tightsteer installed and 32-10-15 tires on it. It also has an (arctic) hard top original for the m38. This jeep has thousands of dollars spent on it. Full specs available if serious”
Kayline Swingout Tire Carrier Lexington, SC $250
Looks in good shape.
https://columbia.craigslist.org/pts/d/lexington-jeep-willys-swingout-tire/7579334898.html
“Vintage Kayline Swingout Tire Carrier
Center tire mount with jerry can mounts on each side.
Tire mount is adjustable
Fits Jeep CJ models
Mounts to the round corner of Tub.
All parts are present except for hardware to bolt to tub.
I would not put a tire on it larger than a 31″
This would be a great addition for an Early CJ project.
Pickup only in Lexington SC”
1947 & 1948 CJ-2As Marthasville, MO $8000
It appears both bodies have some rust.
https://stlouis.craigslist.org/cto/d/marthasville-willys-jeep-cj2a/7575664232.html
“1947 Willys Jeep CJ2A vehicle runs but needs brake work. Have owned vehicle since 1975. This offer includes a 1948 parts jeep. Parts jeep’s engine does not run, but has many good parts and a decent body. Will provide vin #s to serious inquiries. 47 has a fold out windshield. Has lock out hubs on front. A new odometer was put in when vehicle was overhauled about 30 years ago. Vehicle used mainly on property. Please call for more information
$8000 OBO”
1963 CJ-5 Winchester, VA $600
Given the Meyer half-cab, there looks like some value here.
https://winchester.craigslist.org/for/d/winchester-1963-willys-jeep/7581890264.html
“1963 jeep NO MOTOR, NO TITLE 600 obo need it gone trades welcomed”
1948 CJ-2A Green Springs, OH $10,500
This militarized CJ-2A looks solid, but it does have a few unusual features, including the fuel inlet and steps.
https://columbus.craigslist.org/cto/d/green-springs-jeep-1948-willys-cj2a/7583749331.html
“1948 Willys CJ2A for sale. It was restored in the late 1980’s by my father. It has an olive drab paint finish, as well as olive drab canvas upholstery on the seat cushions and backs. My father converted the electrical system from 6 volt to 8 volt. The body tub is custom fabricated from steel. The grill and fenders are original. The hood, windshield frame, and tailgate are all original with the embossed Willy’s name. After the restoration, it was only driven in local parades, car shows and local events. We have stored the jeep under a cloth cover, inside a building since my father passed in 2004. We have recently replaced sparkplugs, points, condenser, fan belt, fuel pump and battery. The fuel tank has been professionally cleaned and is in excellent condition. The carburetor has been rebuilt. It has fresh oil and coolant.”
Hub Loks Hubs Whiteville, NC **SOLD**
UPDATE: **SOLD** Was $175.
These are very hard to find hubs which I believe were manufactured by the Dana-Spicer Corp
“Original vintage late forties – early fifties Willy’s Jeep Locking Hubs
10 Spline Dana 25 Axle
Appear to be in working order.
Will need good cleaning, lubricating, and new gaskets.
Have been in my garage in dry storage for more than 25 years.
I’m cleaning up and they need to go.
I have a Paypal account and will ship if you pay shipping.”
1946 CJ-2A Elmira, NY $7500
Some work’s been complete, but it will need more work.
https://elmira.craigslist.org/pts/d/big-flats-1946-willys-cj-2a-project/7584676248.html
“1946 Willy’s cj2a project
Should be finished this summer. You pick the color raptor liner.
Rebuilt trans, axles, tcase, new shocks, brakes wheel bearings, Drums, shoes. Rebuilt driveshafts. Engine was not rebuilt. Ran smooth and quiet. Good oil pressure. Ground up build.
Sell as is for 7500
Sell finished this summer 12-15000.
Body is 80 percent rust repaired.
Will be painted in may and start reassembly.
Chassis is 90 percent complete. Have parts to finish. Front axle bearings. Steering.
Have registration.”