emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
UPDATE: **Status Unknown** Was $3500.
Runs and drives.
“1946 Willys Jeep 4×4 . This is a running and driving Willys . Trans cable needs adjusting as it has some trouble going into gear but drives fine. Transfer case works great and has been mostly used as a farm and ranch get around truck. As you can see in the pics it has little rust but to my knowledge the body is original. Clean title in hand.”
UPDATE: **SOLD** Was Make Offer.
Has a fiberglass body.
“Im selling a 1953 willys jeep it has the original engine and trans. runs and drives good but it wouldnt hurt to adjust the clutch whitch i may do befor i sell it. it has a 1951 fiberglass body with brand new lowback seats. i have the original seat frames they need new cushions front and rear. i put a 15 gallon fuel tank in the back where the rear seat goes but i have the original that goes under the front seat that will go with it. you will notice from the pictures it has a small scoop on the hood to clear the engine. since the hood is shorter on a 1951. It also has a home made 2 1/2 inch lift on it that was on it when i got it. I will also trade for a side by side or 4 stroke jet ski both must be running. make an offer”
No pics provided.
“Great project that needs to be finished….$2,500 firm…cash only…phone calls only….original transmission and motor….call between 8am – 8pm nothing after 8pm”
UPDATE; **SOLD** Was $750.
(11/30/2014) With the later model axles, this chassis might of interest to someone.
“my brother in law got this in a trade. It appears to be an old Willys body. On a CJ 5 frame. With a what I think is a Ford Motor could be AMC 4 cylinder did not look close. Frame is actually in good shape. Motor trans and transfer case are all there. I believe it has a Dana 30 front with disc brakes and a 20 in the rear. I do not know much about it. it is 90 miles north of north side of Indy.if you have any questions please feel free to text or call me. We do have a title for it. There is no front clip. What you see in the pictures is what he has.”
UPDATE: **SOLD** Was $1800.
(10/30/2014) Project or parts jeep.
“1948 jeep willys CJ2A project with title,no tranny or t-case, what you see in the pictures is what you get.”
UPDATE: **SOLD** Was $10,000
(10/30/2014) It appears to have a VEC body.
“1946 jeep willys CJ2A trail rig, fuel injected GM V6, SM420, and twin stick with PTO. narrowed 9″ (nine) inch ford rear axle and narrowed dana front axle, with lockers front and rear. on board air, warn winch and off-road lights. call or text ”
UPDATE: Was $4700. **SOLD**
“It’s got a 350 with high performance intake carb headers motor is awesome. Turbo 350 trans Brand new 35×12.50 r 15. Cab and interior in great shape. It runs and drives. It’s got a Ford 9inch rear axle. Drum brakes. Paint on the cab is in ok shape, the flat bed has good paint on it. With a little work it could be an awesome truck!(the transfer case 203 dosen’t shift to well. It gets squirmy around 50 mph the way the steering set up and the dash would need some work probably new gauges) and there’s few more things too but those are the main things wrong with it. The steering column and wiring harness are out of a 77 GM truck. CASH ONLY”
Photographer Steve Nelson is a sponsor of the Our Gang Ice Racing organization. He took a ton of photos during the 2014 season and is planning more for this season (as soon as the weather cooperates). Check out all his great 2014 pics here:
http://stevenelsonphotography.smugmug.com/Ice-Racing-2014-1/
Photographed by Steve Nelson, 2014
The seller of these photos knows jeeps pretty well to spot this as a slat grille.
“WWII PHOTO EARLY SLAT GRILL MB JEEP AND CCKW of the 4th F.A. BN.”
View all the information on eBay
No pics provided. See examples here.
“Late 40’s early 50’s Army Jeep pedal car..all original
Make Offer”
UPDATE: **SOLD** Was $6500.
Appears worth a look.
“Clean 1946 CJ 2A Willys Jeep. Runs and drives great. Too many new parts to list Only interested buyers please.”
Could be an easy restoration or drive as is.
“1942 Willys MB jeep. 4 cyl, 4 wd, 3 spd manual trans. In great shape for its age. Clean PA title and currently registered and inspected as a classic. It is road worthy now and I do drive it occasionally. Always stored inside. Asking 8500 obo”
http://philadelphia.craigslist.org/cto/4832299450.html
UPDATE: This is back on Craigslist. Last listed in 2013. Was $1500.
(09/07/2013) “1946 Willys This is a 46 Jeep body with some sort of old truck cab attached. The conversion was done may years ago and the body is in decent shape, with very little rust. I drove it into the garage about 4 years ago and have done nothing with it since. It will need new gas and probably the carb cleaned to make it run. 1500.00 firm. I have a clean PA title in my name.”
UPDATE: **SOLD** Was $3500
“Sell or trade for a land rover, 1951 CJ3A with a Chevy 327, disc front brakes, winch, dana 18 with a manual 3 speed. Small lift 33″ mud tires, power steering, locked front and rear with 5:38 gears. Ruff and tuff just like a old jeep should be, new wiring harness. Tagged for the street but not a daily driver, great for the mountains or beach.”
UPDATE: **SOLD** Was $3500.
This may be a good restoration project.
“1960 willys jeep, 10, 000. Original miles, all original except taillights, runs good, 4×4 works good, basically rust free, nicest original tub you’ll find, 1/2 metal top with doors, snow plow non powered, needs brake work”
UPDATE: **SOLD** Was $1200.
Might be worth a look at that price. Not all original.
“Great project
All original
Title
$1200”
UPDATE: Was $2500. **Status Unknown**
Has a tilt fiberglass hood.
“1953 Willys Jeep steel body with fiberglass hood
strong 427 with 4 speed trans
35 x 14.50 x 15”
UPDATE: **SOLD** Was $275.
Here’s a vintage Scheneker Snowplow at a good price.
“Complete 7′ snow plow off Willys CJ-2A Jeep. Includes the complete blade with skids, upper frame, lower frame, pump, hose, and pump mounting bracket. Works good. It is a nice design that includes braces for the Jeep frame and an easily removable lower frame to improve ground clearance. A small piece of the cutting edge is broken off on one side. The blade was a 6′ and was widened to 7′ many years ago. It could be easily cut back to 6′, but my Jeep pushes it fine. The pump originally mounted on top of the generator on the motor, but I made 2 brackets to attach to the original flathead motor or a Jeep Dauntless V-6. One of these with it if you need it. The unit was made by Scheneker Iron Works.”
It’s a project.
“I am selling a 1946 Willys CJ2A. This vehicle is in pieces as seen in the pictures. It does need work in some areas but overall is a solid project. Motor is the l134, I could not get it to turn over even after pulling the head off. Transmission and transfer case are good, tub will need replaced unless you really want to chop it up. Does not have title but I do have the serial number tag to obtain a title. Please dont waste my time, what you see is what yiu get. Will part out items if needed, email only.”
http://york.craigslist.org/cto/4832212443.html
Could be a diamond … or a piece of coal.
“1955 willy jeep. All stripped down & ready to be restored.”
UPDATE: **SOLD** Was $300
Plenty of parts value for the price.
“76 CJ5 parts jeep, no title no motor good running gear make offer ”
UPDATE: **SOLD** Was $1200.
It’s a project.
“53 willys highhood project clean title vins and registration with plates no engine tranny or tcase sits on xj axles and yj springs gm 76 steering box. have a tranny and tcase and full size axles as well asking 1200 obo for jeep”
Listed as a 1942 GPW, it looks more like a compilation of parts. May have an overdrive. The body has M-38-like cut in the cowl, yet has no side tool indents.
“Old jeep out of dry desert,overdrive,(four shift levers),warn hubs.no title,262 ,265or 283 chevy v-8,Must sell $ 1250 or best offer”
http://seattle.craigslist.org/see/cto/4833553347.html
UPDATE: **SOLD** Was $4500.
Looks solid.
“1958 Willy’s 4×4 Jeep with only 46,000 thousand org. miles. It has been in the same family for 50 years and has been well taking care of. It has been in dry storage for eight years.
The engine was completely over hauled in 1994 and runs just like it did when she was new. ”
UPDATE: **SOLD** Was $14000.
(08/12/2014) This good looking wagon was formerly in a Harley Davidson Dealership. Not all gauges work.
“1960 Willys Jeep Station Wagon. $14,000 OBO. Cash only. Not interested in trades. Shipping is the responsibility of the buyer. This Classic Jeep has been Lifted and is 4X4 WD. 12 volt system and has a 327 small block with 4 barrel carb. Runs Great and Fun to Drive! The origin is from Arizona and it was a Harley Davidson dealer show room vehicle. Included are the following replacement parts: electric winshield wiper conversion, wiper blades and arms, drivers door window, headlight switch, and hi/low beam switch. Headlighs and some gagues are inop and it needs a front end alignment. Please contact me for more information, directions, and negotiation.“
