This might be worth a look.
“This jeep would make a nice project or with a little tlc you could turn it into a good deer camp vehicle. If you have any further questions or you wanna come take a look at it just give me a call”
This might be worth a look.
“This jeep would make a nice project or with a little tlc you could turn it into a good deer camp vehicle. If you have any further questions or you wanna come take a look at it just give me a call”
UPDATE: **SOLD** Was $800
Might have some useful parts.
“I have for sale a 1966 Jeep CJ6 rolling chassis. Minor rust, but solid. front and rear are fine shape. I believe a Dana 35 and a Dana 30. Has seat frames. Asking $800.00 OBO.”
UPDATE: **SOLD** Was $2200.
It’s a project.
“Motor and transmission need work. Photos tell the rest.”
UPDATE: **SOLD** Was $3200.
(11/20/2014) It’s a project.
“Rolling CJ-3B chassis with Chevrolet 4.3L V6, rebuilt Borg-Warner T90 transmission and Model 18 transfer case included. Desert veteran needs your attention to get back on the trail. Project started with new lift kit and fresh tires.”
UPDATE: **SOLD** Was $35,500.
(12/23/2014) Looks like a fun rig.
“Ground up build 1953 Willy’s 3B. Everything new or rebuilt. Blown Small block BDS 4-71 Street charger. Turbo 350 automatic, all steel. Ron Francis Wiring, tilt column… too much to list.
Hugger Orange with gold pearl overlay.
Over 3000 miles on build.”
UPDATE: **SOLD** Was $9,000.
(06/19/2014) “1952 Jeep Willys Cj3a. Restored in great shape. Converted to 12 volt, duel master cylinders, new wheels, tires, soft top, tire rack, bumpers, steering, gauges, roll bar, and much more. Interior rhino liner. Frame, body, and undercoat all new paint. Runs great. Call for more info.”
UPDATE:Price dropped to $1300.
(12/01/2015) It’s a project or parts jeep.
“Bought the Jeep about 6 months ago wanting a new project and I just don’t have time for it. The frame is straight and solid with minor surface rust, the drivetrain is complete. Hurricane 4 cyl (does not rotate), Dana 44 offset rear, Dana 18 transfer case and and the Dana 25 (maybe 27?) front axle, all original. The tub is more or less shot, I was planning to chop it up and make it into a hot rod of sorts but a full restoration would almost certainly require a new tub. The Jeep comes with a good amount of extra parts I had collected to begin the project. The jeep has NO TITLE, the vin plate on the hood is long gone and these things didn’t have the vin stamped anywhere else, but that being the case, once you’ve built it as you desire the DMV can come out and look it over for any vin numbers to ensure it isn’t stolen and then issue a new vin for you to title it under.
Extra parts:
-Dana 20 transfer case in excellent condition
-Dana 44 narrow-track rear from a CJ-5, centered housing, in great shape, unsure of gear ratio.
-Matched pair of narrow-track axles, AMC 20 rear and Dana 30 front from a CJ-5, complete with brakes and steering linkage. Great shape, unsure of ratio.
-GM SM465 4 speed transmission, could use a rebuild but would need to have the mainshaft swapped to mate to the Dana 20 anyway, so a rebuild should be done in the process.
-NP205 transfer case that came with the transmission when I picked it up, not appropriate for this build, but it’s yours if you want it.
– CJ5 Frame that needs to be straightened”
http://wilmington.craigslist.org/cto/5398160128.html
UPDATE: **SOLD** Was $8500
(06/09/2014) The driver’s floor board has been pushed forward. I wish there was a pic of that mod.
“48 Body and frame. 10 year old frame off complete rebuild. Driver floor board pushed forward, wheel tubs pushed back for extra leg room.
Power Steering and 4 wheel disk brakes
Curry build Dana 44 Rear end with detroit locker and 4.88 gears, disk brakes
Dana 30 Front end, 4.88 and disk brakes
New leaf springs
Ranch 9000 shocks
Warn high speed 10K winch with 5/8 spectra “cable”
Rebuild Chevy 153 CID (~25000 miles)
Clifford water cooled intake with Weber carb
Ford RTS all syncro 3 speed with overdrive (cruse at 65 mph ~3000rpm)
Custom build all brass radiator with electric fan back up
200Amp alternator
Optima battery
Wilwood swing peddles
Tilt Steering (flaming river)
Painless wiring harnes
Full roll cage
Custom tire swing w high lift jack
Tow bar”
UPDATE: Still Available.
(11/21/2015) It’s a project. The half top looks interesting.
“THIS IS A 1948 KAISER WILLYS JEEP CJ2A IT IS A COMPLETE VEHICLE MINUS THE STARTER FOR THE ORIGINAL DRIVETRAIN . THERE IS A 2ND BODY THAT COMES WITH IT FOR PARTS . PLEASE CALL BILL FOR ANY MORE INFO OR TO COME LOOK AT IT
ASKING $3500 ”
Perhaps this CJ-5 was the first fringed jeep? The photo was published in the February 1956 issue of Willys News.
The object in front of the jeep is a nibbled out haystack.
“WWII PHOTO= PVT. HERING SCRAPING MUD FROM HIS MB GPW JEEP 1944.”
It’s supposed to be a vintage
“GORGEOUS FRAMEABLE ART PRINT measures APPROXIMATELY 13 by 23-Inches and makes a GREAT GIFT!
NEARLY 40 Years Old and in VERY GOOD CONDITION except for ONE SMALL TEAR, NEATLY REPAIRED with CLEAR TAPE; VIRTUALLY INVISIBLE on FRONT, as shown.
SHIPPED IN MAILING TUBE.”
Marc spotted this jeep. For some reason the larger version had an unusual overlay on it so it’s not very clear.
“U.S. MARINE CORPS PEEP (MB GPW JEEP) BLITZES MOSQUITO BRIGADE GUADALCANAL 1943.”
I can’t vouch for the history of this, but it is interesting.
“I have had this for several years. I deduced it was likely a pin made to sell by people in Holland to the liberating armies or others. There was little money so this was a home grown venture. Recently I found similar JEEPS in Ceramic said to be made in France showing the Liberation date of France. I have also seen other keepsakes that show Jeeps etched in wood and other materials. A collector friend finally ID’ed this pin and it is what I suspected. He has a couple in his personal collection. Apparently there were some sold few years back on e-bay but he thought they were knock offs maybe made from tin. None of those had HOLLAND on the back and were pretty poorly made. The dimensions are1and 3/4 inch wide and 1 and 1/4 inch tall. This pin was in a Paratroopers grouping. Any soldier could have purchased one so no connection to the Airborne just that that is where I found this one.
Apparently JEEP Collectors as well as Military Collectors prize these little pins especially when they appear to be vintage 1945 produced examples. Some of the prices that these have sold for are very impressive. I set the buy it now at the best price I was told has been realized for one of these pins. Please bid what you think its worth but you likely will not see too many around. I will look at all”
Andy spotted this neat keychain that sold on eBay for $23. It features a Rural Willys Wagon from Brazil.
UPDATE: **SOLD** Was $225.
This is being sold by an antiques shop.
“chrissys antiques shop
Great piece!
open 10-4 wed-fri
9-4 sat-sun”
UPDATE: Still Available.
(01/13/2014) Lots of work and money has been put into this cool wagon. Has rear airbags.
http://phoenix.craigslist.org/nph/cto/4842151297.html
“1951 Willy Station Wagon
Just about everything is new
Glass
all Rubber
Seats
Interior wood
Gauges
Steering wheel and column
Lokar shifter
Carpet
Insulation
Appears good for the price.
“51 Willy’s Jeep
Nice Aluminum Flat Bed & Tool Box
PTO Winch – needs repaired
Extra PTO Drive
Fresh Stock Engine (4 cyl) 2500.00”
Runs and drives.
“Its a jeep! It runs drivers and stops. Comes with the top. Its the original 6v system. It needs a bit of tlc in order to be 100% safe on the open highway (to my standards) its a grate summer jeep or an excellent candidate for a full restoration. Text or email me with any questions and i will be happy to get back to you”
http://masoncity.craigslist.org/cto/4843116004.html
UPDATE: **SOLD** Was $3600.
Unusual front bumper.
“1951 willy jeep cj3 with 5 new tires, shocks brakes, carb and more. Has the 2.2 jeep flat head motor that runs good and a 8,000 lb winch, tow bar. $5,000 or REAL OFFER! Please don’t waste my time with low balling.”
UPDATE: Still Available
(04/27/2014) Includes a trailer.
“M170 Ambulance — 90% restoration — canvas/bows, rebuilt F134, all seals, gears, transmission gone thru and rebuilt where needed, new tires, brakes, steering damper, radiator, converted to 24vdc alternator instead of generator, lights, horn, wipers, etc. working condition, new exhaust/muffler, body bumpers/cushions installed, little to no rust, tub in great condition. M101 restored, new bows, boards and used cover, brakes work, little rust in bed. Lots of restoration photos available. New gauges, new speedometer, 24vdc magnetic spot lights included, extra wheels and tires included.”
Has been parked 2 years.
“Time to get rid of my old stuff. It is a 1961 Willy’s.(automatic) Little rust but all in alll in pretty good condition. It ran when I parked it there 2 yrs ago. Has a 6 cylinder motor.”
UPDATE: **SOLD** Was $7000
It runs and drives.
“home built willys wagon rat rod. just tasting the waters. Have another project in the works, so need to trim the herd.
this is titled as a 61 with permanent oregon plates. have taken it to reno and beaches a few times.
The main body came off a 55 willys wagon. the frame is 50 willys 2wd frame. That’s about all that’s willys
motor is a 403 olds from a 79 Firebird
turbo 400 transmission
ford 8.8 from a 2001 crown vic police car
4″ drop axle from speedway motors
4 wheel power disk brakes
and much more we can talk about if your really interested
Please no calls after 9pm, no low ballers, I don’t really need to sell it.
I drive for a living so leave a message and I’ll get back to you
price is OBO Cash or trade only, and face to face. Would consider 16 ft car trailer as part trade, trike or bobber if they’re the righr fit, no shipping or international buyers.
listed on eBay”
Runs and drives.
“I am selling a 1960s Willy’s Wagon Jeep for $4000.00 OBO, priced reduced from $5000.00, it has all original parts. It is in driving condition. Tires are great. cash only…no scams please”
UPDATE: **SOLD** Was $3900.
Has f-head. Needs some work.
“1946 Willys Jeep with hard top. CJ2A civilian jeep with 1965 4 cylinder F head. Jeep was a real good runner just have no time or funds to continue the project. When working on it the keeper on the starter bendix broke. Need to replace the starter. Also have a carb that continues to leak. Wanted to also replace the old style points with an electronic ignition. Parts are readily available just ran out of ambition for this project.”