UPDATE: Was $5800. **SOLD**

Includes an overdrive.

“1949 Jeep CJ-2A,Chevy 4 Cylinder 3 Speed With Overdrive Very Good Condition, Must See To Appreciate”

UPDATE: **SOLD** Was $1250.

Currently in Mexico. No reason to believe it is a ’56. Seller’s photos seem to be backwards (I fixed the bottom one).

“Rusted, Spackled, painted multiple times by a moron, engine gone and needs replacement, 2 and 4 wheel drive with both high and low, three on the floor, awesome relic from yesteryear… only thing redone is the seats… many, many hours of work required to make Dora (named after someone with similar attributes) run again… Parked in my garage in Puerto Penasco (Rocky Point, Mx)…”

UPDATE: **SOLD** Was $3000.

No key. Hasn’t run recently.

“1948 Jeep Willys for sale $3000 or best offer. We bought from one of our customers about 6 months ago. This jeep has been in their family since their dad bought it back in the day. We have a clear title, plate and manuals. They said it did run at one time and it is missing a key. We liked the jeep so much that we loaded it on our trailer. It definitely needs some work.”

UPDATE: **SOLD** Was $2500.

It’s a project with a reproduction tub.

“I just dont have time for this project, This is an excellent willys jeep that is a great project. It has a reproduction body that is very solid, although it does have a small amount of rust but as you can see from the pics, its very straight. It also has a full soft top, and doors, and an excellent roll bar, good gas tank, the brakes work, new fuel pump, and has all the original parts (except air cleaner) . No leaks, I have serviced the entire willys and all rolling stock seems to be good shape.
The engine does smoke and i imagine you will need to rebuild it, but the engine is solid and original, and is not cracked. Also still on 6 volts, with a good battery. The clutch will also need some work, but that is easy once the engine is out. \
If you simply price some of the parts like a repro body, this is great deal on such a project.”

UPDATE: **SOLD** Was $1200.

It’s a project.

“I have a 1951 willys for sale with a 302 V8 from a ford mustang. I have replaced the fuel pump with a new electric fuel pump, new plugs and wires along with cap and rotor, gas tank… This was intended to be a project and just never got around to working on it.”

No pics provided.

“I have a 1947 CJ2 for sale it has the original Hercules motor in it and runs very smooth. I use the jeep on my place when the weather is nice. I put all new front end bearings in it and tie rod ends. The box was extended about 18 inches when I bought it. The person who extended it actually did pretty good work when they did it. Not going to lie it does need some work if you want to fully restore it but that’s to be expected it is a 47 but for the most part it is in fairly good shape all the lights work and horn 4×4 works good both high and low range.”

http://montana.craigslist.org/cto/4827544913.html

UPDATE: Price dropped to $3500.

(12/13/2014) Has an unusual hood modification.

http://portland.craigslist.org/clc/cto/4829280075.html

“1952 Willys Jeep flat fender cj2a fully loaded
features:
-4 point harnest seat belts
-duel “jerry” can mount w/ cans
-tow bar
-CB radio
-high/low 4×4
-new break master cylander
-nice set of military style tires (ride nice!)
-frame mounted role bar
-3 speed low gear transmission

Continue reading →

UPDATE: **SOLD** Was $2250.

It’s not a 1945. It has a mix of parts. Possibly a GPW frame. Has a military fender.

“For Sale: Willy’s Overland 1 9 4 5 Open Jeep.
99% Original Flat Head “Go Devil” engine, original 3-speed transmission and high / low range transfer case, 16″ steel rims. Runs & shifts excellent.
The Jeep’s Tub is in good shape. The floors have been replaced with OEM replacements about 15 years ago. The tub is rust free, no rot, even in the jack compartment. The rear bed has been replaced with 3/32″ diamond plate steel. All the metal work was professionally welded and looks superb.
The jeep runs excellent, & has the 12V conversion, but the brakes are bad. It needs a new Master cylinder. An auxiliary gas tank is currently in use because the original gas tank finally gave out. Both seat frames broke a long time ago, only the bases remain. The top back parts were un-salvageable. We never had a rear seat in the Jeep. The front driver’s side glass is cracked.
It’s time for another restoration and/or rebuild. It’s a great hunting jeep, but we want it to go to a home that has more time and money to put into it.
*What is not original: The front bumper had a tube bumper installed at some point during it’s previous owner’s possession, so that needs to be re-done, and of course, it needs a new gas tank. The emergency brake system was removed. It does come with a full size 16″ spare.
CLEAR BLUE TEXAS TITLE
First $2250.00 CASH ONLY takes it home.
TEXT or Voice Call for an appointment to come and see it
The jeep is located at our home in Salado, TX, about 3 hours South of Dallas off I-35.
If you’re reading this the jeep is still for sale.”

UPDATE: **SOLD** Was $8500

Lots of updates.

“frame up rebuild in 08
new crate 302-eldebrock off road carb-billet distributor
T-18 granny low tran. Novak rebuild to T18 rebuilt T case
painless wire kit-all works
6 point roll cage
power steering saginaw
flex a lite pwr fan
pwr brakes
CV drive lines
bed liner interior
keywords rockcrawler crawler jeep flat fender dana 44 cj3 cj5 cj7 wrangler yj tj fj bronco scout
recent new alt. and battery
most all parts were new in 08. I built this to go to rubicon. I did the trail. good times. the jeep is too small for camp gear cooler etc. and have moved on and built a scout 2. no need for two wheelers. pink is in none op”

It runs and drives, but needs work.

“This was a project of mine and started fixing her up but lost interest due to other projects and space. It runs and drives but the engine started knocking after I initially changed the engine oil. Its either a push rod or even a rod pin could be bad. The oil was like tar when I drained it. I have already redone the entire cooling system including Radiator refurbished and new water pump and hoses along with a new Fuel Pump. Frame is Solid and Drivetrain is excellent. I am firm on price as that is what I have invested. Not in a rush to sell it, so please understand what firm means. Its the OG Green color. Located in Corunna, MI.. Clean Title”

http://flint.craigslist.org/cto/4829301960.html

UPDATE: Price dropped to $4200.

http://chicago.craigslist.org/chc/cto/4829252562.html

UPDATE: **SOLD** Was $1500.

It’s a project, but there may be value here.

“1942 willys for sale was a project, has 383 stroker, 700r4 trans and np203 transfercase. Ford 9inch rear axle cut to fit with custom shafts. Has Dana 30 up front, rear axle has been moved back to fit drive train. Has everything to put together except for radiator, fuel tank rear drive shaft and brake assembly. This is a project that I lost interest in and could use the money for other things. Asking 1500$ firm trades possible if it’s somthing worth it.”