I think this is a Koenig, but I can’t tell for certain.
https://www.facebook.com/marketplace/item/3335403976745192
“Came off my 49 3A”
I think this is a Koenig, but I can’t tell for certain.
https://www.facebook.com/marketplace/item/3335403976745192
“Came off my 49 3A”
Needs some work, but runs.
https://www.facebook.com/marketplace/item/1548157395699546
“1953 cj3b runs and drives well. Does need brake work and a fuel tank will come with a spare fuel tank in unknown condition will also need some minor front floor work but over all the body is in very nice shape a complete front floor pan assembly is $350 new from c and c equipment looking to get $3500 obo comes with bill of sale only”
UPDATE: Still Available.
(08/10/2022) Needs a title.
https://www.facebook.com/marketplace/item/372684211525437
“Make me an offer no title got it on a work trade with a buddy of mine he obtained it on a property he purchased can file for abandoned title just haven’t had time taking up space currently have too many projects make me an offer.”
UPDATE: Price dropped to $3500.
(11/07/2022) Unclear how much value is here.
https://www.facebook.com/marketplace/item/520172219956697
“Willys CJ 2A and a 1958 CJ 5 along with many other parts”
UPDATE: Still Available.
(11/11/2022) Only the one pic provided.
https://www.facebook.com/marketplace/item/1176876013215099
“t’s been a great summer ride around for the 4 years i’ve owned it. It has had a frame off restoration done in the early 2000s with a rebuilt 134ci flathead. Engine was built by Rogers engine being bored .060 over, .020 over on the mains, .030 over on the rods has been 12v converted running a single wire alternator and a electronic ignition on the distributor. Starts much faster and runs lots better then a points system…very reliable. The carter w-o was fully rebuilt in May of 2022. T90 3 speed transmission has been rebuilt and shifts nice along with the dana 18. The transfer case has been modified to have the ability to run in 2wd low and high. 4×4 with locking hubs works great. Paint has chipping, scratches, showing wear which is why it’s 10k. It comes with two soft tops and doors.”
UPDATE: Still Available.
(10/28/2022) This 2A has a different look to it.
https://www.facebook.com/marketplace/item/584046186701046
“Comes with new 3 speed transmission , over drive, lights, wiring, steering box, master cylinder and brakes, cam gear, alternator (12 volts), and new muffler. New paint in yellow and red. Has some zip to it.”
UPDATE: Still Available.
(11/22/2022) Projects or parts.
https://www.facebook.com/marketplace/item/1385600415300115
“Helping my uncle sell his vehicles, he has two late 50s jeep FC 150s. These are being sold as a pair for $3,500 obo”
On Sunday, I was able to tack together the basic structure of the rear portion of the cage. On Monday, I began work on the front portion.
Here’s a look a the back portion with the body sitting on the frame:
There are still a number of small things to do to complete the rear portion (such as adding rear shock mounts, adding some corner supports, and, of course, welding all the connection points).
To properly calculate the two long side bars, which will run from the mid part of the frame back to the rear loop, I needed the body to be sitting on the frame.
Each side bar has four bends, so getting them both the same is a good challenge.
After LOTS of measurements, angle considerations, and design thoughts, I finally got around to bending the two most difficult angles on the side bar. Below you can see the passenger side bar temporarily in position, though the lower two bends haven’t been finished yet (next bend will direct the bar vertically at the dash, then the final bend will redirect the bar forward under the dash where it will attach to a still-to-be-added cross bar.
Unfortunately, I didn’t get as far as I’d hoped, because Ann had a bad migraine, so I had to take the dogs to the groomers (which they needed pretty badly, as bad weather forced us to cancel two previous appts over the past two months).
I expect that by Friday I’ll have all the bars bent, positioned, and maybe even welded.
UPDATE: Still Available.
(08/13/2022) This 3B looks in good shape.
https://westslope.craigslist.org/cto/d/loma-1954-willys-jeep-cj3b/7578316728.html
“1954 Willys Jeep CJ3B
Original hurricane 4 engine, 3 Speed Transmission with warn overdrive, PTO winch, manual hubs front and rear for easy towing, runs great.
Needs clutch linkage re- attached, front differential needs rebuilt- empty removed broken locker.. have the stock gear set or you can put in a new locker.
Former show winner, could be again with very little work. This jeep will go anywhere.
Lifted with 34″ Super Swampers-Siped
Also comes with soft top.”
This top portion of this top is a Porter & Reed hardtop. It appears the sides and back were removed and replaced by canvas (or remnants from a soft top).
https://www.facebook.com/marketplace/item/701735811559702
“1946 Jeep CJ2A · Other_body_style · Driven 1,000 miles 46/47 CJ. Minor modifications over its history. 12 volt. Was running up till a few years ago. Previous owner had medical issues. It does turn over. My son(owner ) is working on starting it up. Price is NOT firm. If your interested I can give you his number”
Needs work of some kind.
https://www.facebook.com/marketplace/item/1643803036022992
“1 Jeep Cj2a red 4 cylinder 4 wheel drive 12v conversion Will run but needs work $5000 Possibly just a major tune up”
Plenty of custom work and paint here.
https://www.facebook.com/marketplace/item/5792514344175372
“1965 jeep cj5. Lots of time and money into this jeep. 350 has been professionally built and is close to 600hp. Ross pistons, dart angle port heads, 3500 stall. new msd, new radiator, new paint and wrap. Inside has been bedlined to match. Recently bought scout dana 44 axle for this with disk brakes. This jeep screams. Ready for hill climbs, dunes, or muddin.”
UPDATE: G. Binks had a question about this hubcap from a Tux Park IV. So, I will post the photo here:
===================
This could be worth a look. Note the full set of hubcaps.
https://www.facebook.com/marketplace/item/874743560501541
“Rare Tuxedo Park Mark IV Jeep cj5A Original 60/40 seats All five hubcaps! Chrome accessories Engine will run Body is very rough Good title”
Bill shared this rare early LJ20.
https://www.facebook.com/marketplace/item/1116810682323652/
“Suzuki LJ20V, low miles, runs and drives. Super rare, complete. 2 cylinder 2 stroke engine!”
Given the three dataplates on the dash, this may be a ’46.
https://roseburg.craigslist.org/cto/d/myrtle-creek-1947-cj2a-willies-jeep/7579961668.html
“1947 Willie’s Jeep. Chevy 283 Runs great. Muncie Four speed Just rebuilt. New clutch new pressure plate”
Projects or parts.
https://sfbay.craigslist.org/sby/cto/d/san-jose-willys-jeep-fc-170-4wd-forward/7581673658.html
“I have two of these trucks. One is a 1958 and the other a 1961. They both need total restoration. They are well optioned with long wheelbases (9ft beds), running boards, hurricane engine etc. The 1958 was a Forrest Service vehicle, original paint color was ‘Safety Green’. 1961 was intended to be a parts vehicle but they both can be restored. Clean title in hand. Emblems and black on yellow plates are in hand as well. There are many parts that go with these Jeeps. Take a look at the pics and let me know if this something you’d like to know more about.”
Needs work.
https://www.facebook.com/marketplace/item/1524352571381011
“L134 engine cranks but I never hooked up the new gas tank. 12v conversion, New starter, battery, fuel pump, spark plugs, wires, distributor, carb, fuel tank, as well as a bunch of other misc parts. Was planning on restoring but have too much else going on. Make me a reasonable offer. It’s an early production CJ3A.”
Looks like quite a bit of work has been completed.
https://www.facebook.com/marketplace/item/668789851550773/
“I’m the third owner of this Willys. Solid body, rust free frame has been cleaned and painted, good seats, all new brake system, engine rebuilt with 140 miles. I have all the parts including two sets of wheels and a soft top, frame and doors. I will not sell parts.”
UPDATE: Price dropped to $2500.
(09/22/2022) Has some floor rust. Data plates all painted.
https://seattle.craigslist.org/oly/pts/d/olympia-willys-1952-m38/7581306627.html
“1952 M38, rebuildable MC marked engine, transmission and transfer box. It has some Cj3a parts. Rear seat, no front seats.”
A rebuild of this would be a good idea at this point, so factor that into the cost.
https://sacramento.craigslist.org/pts/d/pollock-pines-warn-overdrive/7581687907.html
“29 tooth 6 spline warn overdrive model 33v6. I do not know if it is complete. This is exactly how I got it. I was going to send it to Herm in Washington for a rebuild. I have pictures of all the parts I have. Some may not even be for it ? All gears seem to be in decent shape, some surface rust and oxidization on housing inside. I needed a 26 tooth, so this one won’t work for me. I’m willing to ship, however due to weight it’s going to be about 45-50 bucks. Text is best”
UPDATE: **SOLD** Was $7000.
(09/28/2022) Looks like it’s been upgraded to an f-head. No description provided, other than a p#.
TJ shared this wagon. There has to be $800 worth of value here?
https://www.facebook.com/marketplace/item/1248958389331355
“This is a project. I was going to do a rat rod but going back to boats. It is setting on a S10 frame and is rolling but has no motor transmission or interior. I do have the title and purchase plates and tags for it that are current.”
UPDATE: Still Available.
(09/29/2022) Seems worth a look.
https://www.facebook.com/marketplace/item/2051381385047014
“1948 Willy’s jeep runs and drives selling for relatives in eastern MT $8,000 OBO”
This 12-page Jeep News issue was a harder one for me to find. It includes a couple advertising inserts as well.
UPDATE: Status unknown. Was $5500. Link was no longer active on the FB group.
This CJ-3B doesn’t have the single gauge, so it is likely earlier than a 1957.
“Looking to see what it’s worth 1957 willys ? It was running 2yrs ago when parked by relative that has passed. Located in oregon…”