emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
UPDATE: **SOLD**
All three look rough.
“Willy jeep cj2a no motor body in fair shap,transmission is good,front end and rear end good. I have a Willys cj3b jeep engine locked up complete jeep ,fair shape. 900.00 . I have a 1971 cj5 with v 6 Buick motor, no transmission good parts jeep 850.00”
UPDATE: Was $1200.
Runs. No title. Appears to have parts value. Looks like an f-head to me.
“I have a complete 58 willies for sale I dont have a title but frame is good and it runs has hi n lo gear and a winch runs off pto it has the 4 cyl iron duke and it all seems complete no low ballets no check or pay pal great woods buggy or parts if your redoing one”
UPDATE: **SOLD** Was $2000.
Runs, but needs some bodywork.
“1960 Willys Wagon, with the original 6 cylinder and 3 speed transmission, and solid axle four wheel drive. The brakes have been re-done, and a new battery installed. The old Willys runs good, and goes down the road good. The Willys still has the original seats. The previous owner repaired the floorboards and the rust above the right side rear wheel well. I added a photo of the left rear wheel well, which is the only rust spot on the Willys Wagon.”
Runs.
“1942 willys jeep for sale. Runs and drives great. 4×4 works good. Original engine and tranny. Everything works great. Lots of original parts and some extra stuff added to it.”
http://sanantonio.craigslist.org/cto/4982514912.html
UPDATE: **SOLD** Was $550.
Seems like a good price.
“This would be a good project or parts vehicle.”
Top rims pictured need a closer examination.
“I have 4 WWII combat wheels for a Willy MB and Ford GPW. In the first picture, the bottom two rims look goo. The top let rim has a very small amount of metal eroded away around the valve stem hole. The top right rim has holes (you can stick your fingers through) around the valve stem area (shaded area in picture)”
http://dayton.craigslist.org/pts/4984762036.html
UPDATE: **SOLD** Was $1500.
Looks to have value. No title.
I have an old Willy’s jeep CJ2A I need to sell. Been in a barn over 20 years till the barn blew down. It does not run and cannot find title but it is a solid jeep for its age.”
UPDATE: **SOLD** Was Best Offer.
It’s a project with a DJ body on a CJ (of some kind) chassis.
“Up for sale is my completely stripped down 1956 CJ-3 Willy’s Jeep Project. This has been sitting in my workshop for long enough, so its time for someone else to take it over. I learned a lot on this project – the biggest thing being that I don’t have time for a project like this!
The engine was removed in the fall of 2013 and the block planed and bored by Monarch. The head was planed as well. You get everything you see in the pics. It should be everything you need to rebuild with the exception of a gasket kit and either a new exhaust manifold or a heat riser kit to repair the one that you see on the bench. The body seems to be from a DJ best I can tell, but the chassis and running gear is definitely CJ (i.e. it is 4WD, etc and all the data plates point to CJ).
UPDATE: **SOLD** Was $800.
Contrary to the license plate, this jeep appears to have plenty of time left.
“Took out of service a few years ago it needs Front brakes and fuel sending unit. Been sitting in my garage for about 3 years and ran great when parked for repairs. It’s got all new steering joints, Lost interest after that. Three speed in-line six”
UPDATE: **SOLD** Was $2700.
(10/24/2014) The body looks a little rough.
“Selling my one of a kind rat rod. 1953 Willys CJ3B high hood jeep with a 1934-1936 international pickup cab welded into the tub of the jeep. The jeep is equipped with a 283 Chevy motor with an edelbrock aluminum manifold and 450 cfm edelbrock carb, close ratio 4 speed manual trans, dana twin stick transfer case, and warn overdrive. The jeep also has new rancho 2 inch lift leaf springs on all four corners. 31/10.50/15 tires on chrome wheels. The jeep has been converted to hanging pedals with hydraulic clutch, GM title steering wheel and a bench seat made to fit with the jeep. Now for the International cab I have the windshield frame in place connected to the cab, original back glass, chrome peep mirror and inside mirror, cowl windshield piece and a few other pieces and both original doors. I have a really cool old trunk I put in the back of the bed for extra storage. This rat rod does run and drive and is preaty dam fast!! All lights work and could be street driven if desired (would not recommend driving on the highway). I have a clean Colorado title for the 53 Willys”
UPDATE: Still Available.
(03/25/2015) Body and front clip are all fiberglass. Motor needs rebuild.
“42 willys flatty all glass body hood grill & fenders,bobcat products , smf motor needs rebuild no intake . ,t-150 3spd dana 20 transfer case dana 44 front alloy u-joints Detroit true trac with 5.38 ring &pinion , rear 44 welded 5.38 . 4 wheel disc brakes needs some tlc but great wheeler, also have 74 cj frame to go with. tires are 35-10.50-15 boogers three runs on them. my loss need to pay medical bills.”
http://seattle.craigslist.org/oly/cto/4984564329.html
<– Day 6 – Fri. Apr. 17th: Art Fair in Alamogordo, NM | TRIP OVERVIEW | Day 8 – Sun. Apr. 19th: Resting and Recovery –>
Ann and her aunt Cindy with Smokey Bear in the background
I was feeling better Saturday morning, so rather than rest, Uncle Fred and Aunt Cindy joined Ann and I for a short road trip into New Mexico’s mountains to hunt down a former gold town called White Oaks.
Today we completed a grand circle through part of New Mexico.
The first hour of the trip consisted of flat New Mexican landscape and an even less interesting highway. However, the company kept that part of the journey interesting.
Sign in Carrizozo.
We stopped in the tiny town of Carrizozo to grab some Advil, as Fred has suffered a serious and life-threatening elbow injury at the hands of his grandchildren, whom Fred has discovered are now big enough to mob him and take him down. And by life-threatening elbow injury I mean the injury effects his dominant arm, thus it seriously curtails the ability for him to eat or drink with it (hence, threatens his way of life).
It turned out that the arm injury was a blessing for the rest of us, because as Cindy and I sat in the Jeep waiting for Ann and Fred to return, we spotted a donkey (or ass??) on top of a building a block away that was off the well-traveled highway. When Ann and Fred returned, we decided to investigate.
Donkeys on the roofs of both buildings in Carrizozo. There were also donkeys on the sidewalks. You might also recognize this area from the movie “The Book of Eli” which was filmed along this street, though there were facades added in certain areas.
More donkeys and other sculptures in a hidden alcove.
Don was asked to share pics of his 1961 wagon. It sure looks great! He included a photo of an earlier jeep as well. He’s owned 19 jeeps over the past 35 years. He’s currently working on a 1962 truck. I’d say he’s got a serious case of the Willys sickness!
I found both an ad for the Smokey and Tonka Jeep and an actual Jeep and Smokey.
1. Ad for Smokey and Jeep (If the museum has this ad, I didn’t see it).
View all the information on eBay
2. Jeep with Smokey (seems a bit much given the wear?)
View all the information on eBay
Can’t be too many of these around? This one is located in France. I suspect this is newer than 1960.
There’s another version of the 1960 Nassau Surrey for sale on Amazon and mentioned on the CJ-3B Page (scroll down to Newer Toys).
“Très beau modèle en porcelaine, en 3 dimensions, à l’échelle 1/200 environ (24 mm de long, 11 mm de large et 14 mm de hauteur)”
View all the information on eBay
This is such an odd ad. The ad compares the Jeep to the RCA 501 computer that does bookkeeping and more. I wonder how long this joint campaign lasted.
View all the information on eBay
UPDATE: **SOLD** Was $2600.
Dan spotted this wagon. Looks like it has great potential.
“1949 Willys Overland. Full window wagon. 3 speed, 6 cylinder. Pink slip, non-op”
Has Buy it Now of $2750 and Make offer option. As Dan noted when he forward this ad, the seller seems pretty straight forward about this jeep.
View all the information on eBay
“Up for sale is a fairly rare 1966 Jeep J-200 “Gladiator” 4×4 truck with the optional Custom Cab trim package. This features the good-looking chrome front grill, aluminum front end trim, chrome front bumper, fancy stainless steel trim on the rear of the cab, Custom Cab emblems, and more.
Powered by the venerable 230 cubic inch Tornado inline overhead cam six-cylinder engine, she runs very well. I replaced the water pump (was squeaky and was ready for replacement), rebuilt the hydraulic clutch including going through the master cylinder, and replacing the slave cylinder), changed fluids, and properly set up the timing and carburetor. A nice-running truck with a lot of life left in her; showing 30,175 on the odometer, but likely rolled over once.. who can say? No exhaust smoke or bad engine noises at all. She’s got the three-speed manual “three on the tree” transmission, and optional power steering, which is a big plus. 4×4 transfer case gets her in and out of all wheel drive properly, and she comes with some spare parts including a set of Warn locking front hubs. Good brakes combined with all the above make her a sound driving truck.
Continue reading
UPDATE: **SOLD** Was $1000.
Needs a tranny. Looks in good shape otherwise.
“My loss is your gain! It needs transmission work. The shop says a rebuild would be about $600 (if I R & R). I don’t feel like it right now. I’d rather move on with my next project. It’s $1000 firm (if I can’t get that, I’ll do the tranny and sell for $2000+. You pick up (tow or trailer).
I bought this three years ago with the intent to try it out this summer as a “retirement job” but family circumstances and increased hours at my other job have cancelled that plan. I owned it just long enough to make a lot of little fixes (lube, oil, added a radio & antenna, shocks, flashing yellow light, wiper blades, installed a window washer, fixed the horn, replaced exhaust manifold gasket, new ignition switch, plugs and wires, air filter, fuel filter, tranny filter & fluid, pcv, rebuilt carb., new fan belt, coolant flush and fill with new thermostat, – and probably a couple of other things I can’t remember right now….
UPDATE: Still Available.
(07/24/2014) Kind of pricey for a roller with no title.
“48 Willy’s panel. No motor or trans. Stock chassis. No title, (bill of sale provided). This is a solid & rare project that can be brought back to original, Retro, classic, or cool Rat Rod. This project can be sold as is with roller’s, rear wheel’s not included, $4,000.00. There’s no glass. the truck is from out west so it is pretty solid and clean, does not need, but miner body work if any, other than glass. Truck was a dry cleaner’s truck & still has the original patina. Can also build to your spec’s, $$$$?, we have now removed the body off the original chassis, we will sell the the chassis, witch is in very good condition, it is 1041/2” wheel base, make offer if you can use. .”
http://minneapolis.craigslist.org/csw/cto/4982805474.html
UPDATE: **SOLD** Was $2500.
(04/13/2015) Runs and drives, but doesn’t stop well.
“Willys CJ3B Jeep 1953 Runs & drives needs brakes, leaks oil from the rear main and smokes body has rust in the usual spots.”
<– Day 5 – Thu. Apr. 16th: Meth and Science | TRIP OVERVIEW | Day 7 – Sat. Apr. 18th: No Scum Allowed –>
Thursday night I came down with a light cold (or something), so I took it easy yesterday. By the evening I felt good enough to join Ann and her uncle Fred for a visit Alamogordo’s art fair. Fred is president of Otero County’s STEM program. He and his wife are also deeply involved in First Robotics and judge robotic competitions all over the country. As leader of Otero Stem, Fred organized a demonstration at the local art fair. It gave the kids a chance to show off the their robots to the public, while Fred and the other leaders introduced STEM to many parents who attended the fair.
Fred and I loading the high school kids’ robot.
The Junior High School aged kids robot is on the left.
Fred’s always in trouble with the police :-)
There are as many girls as boys involved in the Otero program. Both Fred and Cindy are Mechanical Engineers and worked for Boeing. So, they believe in Engineering as a career.
While we were at the fair, Smokey Bear stopped by for a visit. Why would Smoke Bear be attending the event? Smokey is/was a local bear, but I’ll save that for a later update.
<– Day 5 – Thu. Apr. 16th: Meth and Science | TRIP OVERVIEW | Day 7 – Sat. Apr. 18th: No Scum Allowed –>
Neat photo!
943 Press Photo Boys Clubs Collect Pennies to Buy a Jeep For the Army
This is an original press photo. Photo measures 9 x 7.25inches. Photo is dated 01-21-1943.”
View all the information on eBay
UPDATE: **SOLD** Was $650.
Not to scale, but still might make someone a fun project. Thanks to Roy for spotting this one.
“I have an unusual project for you!
hand built or homemade mini jeep body….
this is all steel and is 36″ wide by 68″ long
great start to a custom build, put this on a lawn tractor or use atv components for a true 4wd build.
Imagine the time this took to build, unknown history, possibly from lakeside or elitchs???”
