MIght be a solid jeep.
“Ford Pinto Engine. In covered storage 8 years. Includes spare tire and extra carb (new). Contact Del. phone only.”
MIght be a solid jeep.
“Ford Pinto Engine. In covered storage 8 years. Includes spare tire and extra carb (new). Contact Del. phone only.”
UPDATE: **SOLD** Was $1000.
Pics were dark. Missing parts. MIght still have value.
“elling my 1947 CJ2A Willys. Came out with trencher on back, most of it is there, along with extra parts. Its been sitting at my place too long, so its time to sell. No title, I bought it from original owner, who said he never had a title. It was considered off road/farm equipment so he never had it titled. Has serial number, and have looked into getting title, won’t take much to get one for it. Asking $1000 for it. Wanna sell whole, and not sell parts. Lots of usable parts for another project or to fix up and drive as a jeep. Rims on jeep in pics are not rims going with jeep, those are off my other one. I have different rims and tires to put on jeep that sell with it.”
UPDATE: **SOLD** Was $2000. Might have had an MB body and chassis.
Runs. Has a poor bondo job near the driver’s step.
“Willy’s Jeep for sale, Flat fender rebuilt engine runs great transmission works new clutch. needs brake flushing there is air in the lines.Needs seats and detail work. Registration is current non op status.or trade for big street motor cycle must be running and reg. current.”
UPDATE: **SOLD** Was $700.
“good project jeep all there but the bell housing 700 obo I don’t have a title just old and got lost”
UPDATE: **Status Unknown** Was $2850.
Looks a bit rough.
“Nice clean classic 48′ wheelys jeep please call for more info nice solid running truck sherry or David”
Rough.
“I have a 1940-1950’s Willy Jeep truck. It looks to be in decent shape for it’s age and the fact that no one has taken care of it. At least one front tire is flat. It has been sitting in my driveway for a year. Would like to see someone take it and fix it up. Looking to get what we have in it so far, $2,500. You will need a trailer to haul it away.”
UPDATE: Still Available.
(03/19/2015) The passenger side has a drain hold, but the passenger side doesn’t.
“1947 willys cj2a. Rebuilt l134, new brakes lines and wheel cylinders, new wiring, rebuilt transmission and transfer case. Needs absolutely nothing.
all body work is done, all metal no bond or fiberglass.
Painted od green as a military tribute. Complete with invasion star.
must see to appreciate.”
Don will be spending the next month traveling through New Mexico and Colorado. Lucky for us, he’s watching for jeeps. He spotted this redone CJ-2A at a Larry H. Miller Jeep-Chrysler-Dodge Ram dealership in Albuquerque. I guess we’ll be stopping in there during our next visit!
Paul Pulver is an art director assembling a team to do a photoshoot near Quincy, Washington, at Frenchman’s Coulee (not far from me). Most of his team his flying in from Pennsylvania. As he explains below, he’d like to rent a 1970s jeep from someone in the region for the photo shoot. He’s offering $1000 for the day plus a night in a motel for the jeep owner. The photoshoot is August 19th. If you are interested, contact Paul at paul.pulver@verizon.net, or give me a call at 610-517-5496. He’ll probably request a photo that shows the rear of the vehicle with its top removed.
His client wants a shot from behind towards the front of the vehicle with the models inside. An illusion of movement will be created, though the vehicle won’t be moving. Here are a couple of stock photos (though the second doesn’t show movement) that provide a flavor of what he’s been asked to produce. The photos below show a 1960s Ford Bronco:
I mentioned that some people have had good experiences and some bad with photo shoot/movies. He explained, I’ve had too many experiences with directors and photographers asking models/talent to do stupid things. I don’t work with people like that. That won’t happen here — I promise you.
I also asked about why type of 1970s CJs or Full-Size Jeeps’ he was considering (and provided links as he’s not a jeep expert). Other than being a convertible, it could be anything from a Jeepster Command to a CJ-5, CJ-6, CJ-7 or CJ-3B. I think a stock Bronco (as pictured above) or another vintage 4×4 from the sixties might also interest Paul.
Here’ s the email Paul sent with the details.
To introduce myself, my name is Paul Pulver. I work as an Art Director for Film and Television, and I’m currently working on a still photo shoot for The Vanguard Group (they’re a financial group that is marketing to employees at Google) that we’re going to be doing at Frenchman’s Coulee in Washington State.
I’m looking to rent a good looking vintage Jeep for the shoot, and I came across your website (which is great, by the way…I’ve learned a lot!) and I thought I’d reach out to you and your readers. Continue reading
UPDATE: **SOLD** Was $7500.
Has a couple updated, but looks solid.
“I am selling my 1952 Willy’s Jeep with 225 V-6 engine. The jeep is in excellent shape and drive great! Please call or text and I will get back to you quickly. $8,500 OBO, CASH ONLY.”
UPDATE: Pics now provided.
“’62 DJ3A project with title. 90% complete (minus engine and radiator) but is a rough project. Original 4-lug suspension. I have a running L-134 but it isn’t included with the Jeep. I just trailered it from Missouri yesterday and haven’t cleaned it up to take pics yet.”
UPDATE: **SOLD** Was on eBay.
The builder of this jeep (who isn’t the seller) had an unusual solution for the front driveline. Not sure why it is attached at all. The seller also provides full disclosure that it shouldn’t be driven faster than 55mph.
The web server was down last night, so I didn’t get a chance to finish updates. They should all be up by noon EST / 9am PST and this message will disappear. Thanks!
UPDATE: **SOLD** Was $14000.
(06/05/2015) Looks like a nice build.
“Immaculate 1953 Willy’s Jeep with a 231 Buick and auto trans. Comes with matching trailer, contact David with any questions.”
UPDATE: Was $4500. **SOLD**
Needs work.
“Unique body style 1961 Jeep FC170 PU. Seldom seen but in good shape for a restoration project. Needs mechanical and body work. Not for the faint hearted, but if you are looking for something few others have, this could be for you.
Have collected many parts for resto-mod that are included.
Many photos and detailed description available by e-mail.”
UPDATE: Still Available.
(05/09/2015) It’s a no-title project, but has potential.
“I have a 1953 Willy’s Panel Wagon for sale. It is a rolling chassis only, with no title, engine, or trans.
Body is in great shape, with only two problem areas, the area around the gas cap, and the bent up sheet metal under the back doors. Other rust is surface rust only. Panels are straight, and the interior is not all chopped up. Doors wand windows open, but glass is bad. Again no title, but I purchased from fellow in Kansas, with bill of sale. Title can be applied for from Kansas. Call with any questions. Thanks.”
http://stlouis.craigslist.org/cto/5098703828.html
Appears to have a new body.
“restored 1949 willys frame off …new project in the works sell or trade pics speak for themselves call”
UPDATE: **SOLD**
Both look interesting. You don’t find many M-38s with heaters on the cowl.
“1952 M 38 FLAT FENDER WITH RARE ARTIC CAB AND HEATER, THE JEEP STILL HAS IT’S 24 VOLT ELECTRICAL SYSTEM AND ORIGINAL MOTOR AND DOES RUN, NEEDS RESTORED HARD TO FIND, LOCATED CHADRON NE CALL FOUR THREE ZERO TWENTY SIXTY AREA CODE 308 ALSO HAVE A 71 COMAMANDO RUNS WELL DUANTLESS V 6 WIFE WANTS HER CAR IN THE GARAGE…………MAKE U A DEAL ON BOTH 8 GRAND FOR THE PAIR……”
Seller is interested in a trade.
“1948 cj2a Chevy 327 huskey overdrive new tires,seats,battery,fuel pump,master cly. Trade for 72 older Ford short bed”
It may be an M-38, but the body is a replacement body.
“1951 willys 80% complete
New steel body , solid frame
Runs and Drives”
UPDATE **SOLD** Was $3500.
(06/19/2015) “So i have a 1947 jeep willys cj2a has stock running gear has been upgraded to a 12v system it runs and drives sitting on 33 inch tires just bought guages trying to figure out how to wire them in. It is a project but it runs drives and is registered currently i dont really want to sell this jeep it is my project but hard times we all understand i will not sell for a low offer i know what orginal parts are worth these days just seeing if i can get any real offers”
UPDATE: **SOLD** Was $1200.
(06/21/2015) Listed as a 1948, this appears to be a 2WD DJ-3A.
“I am selling my 1948 Willys CJ2A. It is a project vehicle. This is the most fun vehicle I have ever driven.
It has been sitting a while in the garage and I haven’t had any time to putz with it, so it doesn’t start right now. That’s the usual story though. Normally it is a little starter fluid, charge battery, wiggle some ignition wires and she does. Needs new exhaust, radiator, electrical, brakes ( master cyl) speedometer and parking brake cables and tires. I drained the gas tank a few years ago and it was orange so I imagine there is some rust in the tank. 2 wheel drive. No top.
Runs.
“Running and Driving 1946 Willys CJ-2A ECV (early civilian vehicle) come take her for a drive. Just found a different different toy and need to sell this one to fund the other.”
http://eauclaire.craigslist.org/cto/5098385939.html
It’s a mix of parts.
“Very rare 1947 Willy’s Overland Jeep Panel truck body on a refurbished 1951 Jeep Pickup truck 4×4 frame. Has all new bushings, bolts and nuts. No engine, transmission or transfer case. Comes with miscellaneous parts and a Chevy 283CI engine with engine stand for extra $100.”