Frazier shared this photo from the archives George Rodger. There’s some really neat photos of all kinds.
George Rodger Archives
Magnum Photos Photographer Portfolio
Land Rover Photos
Frazier shared this photo from the archives George Rodger. There’s some really neat photos of all kinds.
George Rodger Archives
Magnum Photos Photographer Portfolio
Land Rover Photos
This appears in good shape.
“Serious inquiries only, Beautiful daily driver with many new parts. Won best in show last year. New parts installed by the book: Head gasket, exhaust, hoses, oil lines, filter, battery, battery cables, all new brake and fuel lines, fuel tank and cap, tires, locking hub, tie rod ends and tubes, inner differential seals, bendix thrust washers and bushings (outer axle), king pin bearing cups, both transfer case output shaft seals, all shocks, horn, all gaskets and seals for front end, hood blocks, windshield frame, 2 rear universal joints, windshield cowl seal, side view mirror, rear seat, fuel can bracket and canvas strap, troop straps and anchor points, 2 seat cushions, body handles, seat back pouches, pintle hook. Vintage parts installed: headlight guards, front shackles, rear tire mount, rear bumperettes, blackout light, siren (working). New parts on hand not installed yet, bell crank rebuild kit, draglink kit, radiator felt kit. Bottom line, this jeep does not need much just someone to keep her strong and cool. Why am I selling it? to finish my other project and make room in the garage.”
UPDATE: **SOLD** Was $5000
Could be a good price.
“1944 Jeep GPW Can be a great driver with a little work. This Jeep has new brakes including shoes and master cylinder. Engine runs good but is noisy.”
This pair could be a good price.
“VINTAGE Truck for Sale price REDUCED As Is
This is a 1953 Willies Wagon in good condition. It has little rust and runs.
Needs a good amount of interior work. I have a second Willies Wagon that is also a 1951, in Green, that I will sell for parts at $500 to whomever purchases the blue for $2000.00
Gotta get them off my property.
Note: the Flathead Engine in the Blue Willies is worth the price of both CARS!!!!
Email or Call with any questions. Have a nice day.”
UPDATE: **SOLD** “Was $3750.
The front frame rails aren’t original, but still may be worth a look.
“1947 Willys CJ2A, runs and drives good, clear title, all original except for 6V alternator, new 6V battery, newer military style tires and exhaust system”
Appears to run and drive.
“For Sale…..1946 Willy’s Jeep CJ2A….asking $4,000.00 firm. Email for more info or if you are interested. Interested only buyers.”
Runs and drives.
“Selling my freinds 48 Willy’s.
Original flat head 4cyl. 6 volt system.
New battery, belt, gas cap ect.
He has had it for over 30 yrs. Runs and drives. Pops out of 2nd gear sometimes, but always starts and goes. Not very pretty. I know very little about these but Im amazed at how good it works.
He gave me a custom trailer that it fits on. I had planned on keeping it, but may consider selling.
May consider trades. Vehicles, fishing boat, trailer, dirt bike, quad, buggy. What do you have?”
UPDATE: **SOLD** Was $4000.
Needs a closer look. It’s got an MB/GPW windshield and is missing a hood block.
“1946 Willys cj2a, 231 v6, some rust, but hey, this thing is 70 years old.
Put the whole new brake system in a few years ago, engine runs strong, no major mechanical.
No top but there is a frame for a soft top. Asking 4000 dollars.
On a scale of 1 to 10 I would put it at a 6.5.
Text only please, no low ballers, I am NOT in any hurry to sell.”
Seller is auctioning lots of tools. The 3A is a project.
“TOOLS & EQUIPMENT
Saturday, August 22nd 10:00am
Preview from 8am on Auction Day ONLY!
(2) “Ford” tractors • “John Deere” M tractor • boat • CJ-3A “Jeep” (apart) • 3-shank subsoiler • “Miller” 300 AC/DC w/spool gun • “GMC” blower • welding leads & whips • “Clemco” sandblaster • large sandblast cabinet • stainless steel tables • 2HP 3phase irrigation pump • trencher • tool boxes • lots of hand tools • 19.5″ tires • “Brother” industrial sewing machine • milk cans • collectibles • and much much more!!”
http://portland.craigslist.org/clc/for/5174552675.html
UPDATE: **SOLD** Was $1000
(06/24/2014) The flattie runs, but the CJ-5 does not.
“ have two Jeep Willy’s
No titles for either one.
One is missing part of the body but runs and drives (1951 M38).
Second Willy (1955 CJ-5) did run when parked about 10 years ago. Engine is free not frozen and has full body.
I was going to restore both but no longer have the time and wish to sell them.
I am told that the running Willy is a 1951 M38. The engine has been rebuilt runs good. Brakes all restored and is drivable.
Asking $3500 for both.
Serious buyers only please,”
Tim Ghianni published a story about Emmett Automotive of Nashville that included a couple photos of the owner’s CJ-2A. He routinely has it parked where people can check it out.
http://www.tnledger.com/editorial/Article.aspx?id=83221
Appears to have a PTO and a replacement body.
“1947 Willy’s CJ2 older body off restoration, everything working order including PTO, all stock, ready to travel”
UPDATE: **SOLD** Was $12,000.
(08/16/2016) This is listed as a 1950 CJ-3B.
Flat thunder high hood, 350 V-8, soft top, soft doors, new BF Goodrich TA tires, rear locking hubs, towable, wench, everything works, great condition. ”
Looks like a good price on a faux military jeep.
“1946 Willy’s Jeep rebuilt and restored. Runs great.”
The pics aren’t great, but the wagon looks good.
“This is a 1951 Willys has a built 302 motor. Runs and drives great. Has newer tires. No rust. Please text or call for more details. Only serious inquiries please. $11,000 or possible trades.”
UPDATE: **SOLD** Was $8000
(06/24/2015) Some daylight pics would be a little more helpful 🙂
“IF YOU ARE LOOKING FOR A ONCE IN A LIFETIME DEAL! YOU FOUND IT.
RUNS GREAT, DRIVES GREAT, LOOKS GREAT. ORIGINAL MILITARY ISSUED WILLY’S JEEP, HARD TO FIND IN THIS CONDITION. PLEASE CALL IF INTERESTED.”
UPDATE: Still Available.
Nicely modified jeep.
(10/24/2014) “Must see in person to truly appreciate ( I know everyone says that but I’m serious), color is not as overwhelming, and this jeep really is sweet.
Up for auction a 1947 Willys CJ2A flat fender, extremely nice!! Color fits this jeep perfectly… Restoration completed about 3 years ago with only 500 miles since restoration. 95% of this jeep is new, from the engine and transmission to the rear axle spindles and bearings and gears of the rear end with all receipts to prove it. Even minor components such as cowl weatherstripping and fuel tank neck grommets have been replaced… Outside of the dana 18 transfer case and front axle, and front drive shaft, pretty much everything else has been replaced with new upgraded components!!! Truck is powered by a 300hp 350 Chevy Crate engine. Edelbrock endurashine top half with dual 500cfm edelbrock thunder series carbs, RPM Air Gap Intake, MSD pro billet dizzy, Novak built sm420 tranny 4 spd with super low drive shaft breaking 1st gear, dana 18 twin stick transfer case, patriot tight tuck headers, 22×19 Aluminum racing radiator (with both mechanical and electrcial fans), Currie Axles, Currie Built Ford 9″ rear end with 4.11 gears, Saginaw High Steer Steering box, NEW 33inch tires, 3 inch lift, custom interior, custom built heavy duty rear drive shaft, Rhino lined gloss black bed, powder coated bumpers, winshield frame, and roll bar, base coat/clear coat paint. Jeep can be driven on highway w/o any problems…
All steel body, no fiberglass”
UPDATE: **SOLD** Was $3500.
Sounds like it needs work.
“Bought this with plans for full restoration, but just don’t have time to finish it. Body metal and frame are in very good shape. Also have metal side panels and roof in fair condition and three original rims. Was running great when I stored it. Full restoration would be one way to go or just take her out to camp and use it on the trails. Lots of info on these on the net.”
UPDATE: Was $2700 **SOLD**
(07/29/2015) It needs work of some kind.
“Project Jeep, kind of losing interest in it a bit because I’d rather have more of a hot rod classic car or truck. Would prefer to trade, interested in any offers but mostly looking at Chevy/GM cars or trucks, rat rod, classic station wagons, lowered, lifted, you name it. No Hondas or tuners or anything like that. Would also be very interested in a K5 Blazer. Prefer to trade straight across.
The Jeep has solid bones to start as a restoration or wheeling project. Already lifted on Rancho springs. Has a fuel cell mounted in the back, Buick 225 oddfire engine runs, needs a head gasket and carb, was told it’s a Muncie transmission, 4 speed, transfer case with Hi and Low. Replaced starter, new plugs, plug wires, cap, rotor, brand new PerTronix electronic ignition. Offenhauser intake manifold. I’ll be steadily working on this thing still so it will just be getting better and better. Clean title as well.”
UPDATE: **SOLD** Was $1650.
(07/12/2015) Appears to have potential.
“Willy Jeep 1952 M38. , have original brass data plates, good frame 4 good military rims, body is not beat up,, repairable, lots of new parts, , new repro windshield, left fender. hood, transmisson cover, grill, approx,, $1500, in new parts,correct rmc serial# engine block. engine is currently seized ,soaking it now, no title, no seat frames or radiator,”
UPDATE: **SOLD** Was $2000.
It’s rough.
“Vintage 1950 jeep
Any questions just call or text, contact info is listed”
UPDATE: **SOLD** Was $1200.
Doesn’t run.
“Does not run. Used to but needs rewired. The motor was changed out to the buick v6. Axles were swapped out for bigger not exactly sure on the size. It has the dual stick transfer case.”
UPDATE: **SOLD** Was $20,000.
“1942 Ford jeep from WWII.
Has original winch, shovel and axe.
Order restoration. Runs well.”
UPDATE: **SOLD** Was $850.
(05/30/2015) Might be some value here.
“Have owned for the last 20 years but it hasn’t been run much in the last 5…”
UPDATE: **SOLD** Was Make Offer
“There is 3 fc’s. Therd is two 1957 150 and a 60s 170. The 170 did run and I will attempt to get it running again. The 150s are not running. There is a new engine for one of them. There is two parts engines that can be rebuilt. There is way too many spare parts that go with these to list on here. A guy could easily fill the back of a pick up with just spare parts. One cab has been sandblasted and the corners have been replaced. It still needs some body work before paint. The only thing I can think that I dont have is the seat frames. They didnt come with any and I have not found any. Any questions or if you want more pics please call or text. Hopefully these will go to someone that will get them back on the road because these are a neat part of history. I might be willing to haul all or part depending on how far.”