Nice assortment of pics from around the world. First, from Indonesia:
1967 Jeepster Commando Meadville, PA $7997
Glenn forwarded this nice looking Commando. That’s an interesting front bumper. Needs a little work.
“OH—SO FINE—1967 Jeepster Pickup—RARE RARE RARE PRICE…TALK TO ME!!!!!
Fresh Paint– !00% on Tires–FRESH Engine ALL REBUILT–FRESH Interior–all on a Rust Free Body
……….FROM ARIZONA……….
THOUSANDS in new Parts—Radiator–Springs–Engine Rebuild–Comp Cam–Cylinder Heads–all to Buick 225 V6 (as original)–Paint–Interior–97% ready to go—needs clutch adjustment–etc—–Has rare half roof—and really rear roof over rack–see pic’s.
Beautiful color combination–you will really love this vehicle—yes it is a 4 wheel drive
A few minor things to meet your 100% satisfaction—You will love it…I just have too many cars and projects.—MY LOSS!!!!
YOU WILL WANT TO SEE IT! YOU WILL WANT TO OWN THIS VEHICLE”
https://pittsburgh.craigslist.org/cto/5204123103.html
1946 VEC CJ-2A Paradise, PA **SOLD**
UPDATE: **SOLD** Was $3800.
Looks promising.
“this was a garage find in Philadelphia pa. last inspection was 1984.brought it home.got it running.got brakes working. changed fluids.has some rust but not bad.hole in drivers floor is about the worst.tool box floor is in tact.rear corners show some rust,but not much . front frame horns were welded years ago.speedometer is working and shows 20,485 ,who knows? engine starts and runs.all gears seem ok. serial # 17418 , frame #17418 , body#7507 , tailgate#7503 engine block was replaced with a newer block (supersonic) but looks like original accessories even the head.has pto on end of transfer case but no shaft or rear unit.this is a fairly early civilian willys with colum shift,that has not been messed with or restored.this is a drag out of the garage find so it needs a lot of things. oh, there is a soft top and doors. four old canvas doors also.call with questions ”
1973 CJ-6 Ramsey, MN $3500
UPDATE: Still Available.
(08/21/2015) Looks like a good price.
“1973 jeep cj6 very Rare! Run’s Great New part’s v8. 3 Speed Over 2000$ in New Part’s!
New: *Manifold & Headers
*Exhaust System
*Gas Tank
*Fuel Pump W/New Line’s
*Break’s W/New Line’s
*Wheel Cylinder kits
*Wheel Bearing’s in right front & rear wheel’s
*Complete Carb (Two barrel)
*Rebuild Bucket Seat’s,Rear Seat,Best Top Soft Top. Super Rare 3500.00”
1948 CJ-2A & Trailer Elk Grove, CA **Status Unknown**
UPDATE: **Status Unknown** Was $8100.
Lots of upgrades to the 2A.
“Buick V6 w/SM420 4spd trans/Model 18 transfer case
Dana 44 front w/Detroit Truetrac/Dana 44 rear w/Detroit Locker
Warn 8274 Winch
Spring over w/Wrangler springs front/rear
34×10.50 Swamper tires plus extra set of 33×12.50 Pro Comp MT tires
Has been a very reliable off road vehicle….never a breakdown….basically bullet proof
Too many other upgrades to list……call for details/more pics
Bantam Trailer was manufactured in 1941. Has a pintle hitch and pintle hook receiver included
Trailer has 10.50×15 Truxus tires w/about 100 mi on them. Tailgate is welded closed with diamond plate. New wheel bearings. This is a HEAVY duty trailer
Would consider selling Jeep or trailer separate. Jeep alone price is $7,000. Trailer alone price is $1,600.”
1953 CJ-3B Oklahoma City, OK **SOLD**
UPDATE: **SOLD** Was $1500.
Runs, needs work.
“This is a pretty good running old jeep, been a Lot of work done to it, but it needs a little more to be pure, it’s got brakes, low and high range and 4X4 works great, locking hubs, big tires on 15″ wheels and a good heater. It’s still a project. The body has been removed and sand blasted, new floor and cargo panels replaced, it’s all in primer but some body work is still needed. The frame is strait and rust free. come look at it and make me a decent offer – No Low Balls – will piss me off ! I got good money and a lot of time invested in this thing.”
1952 M-38 Medford, OR $3000
UPDATE: Price dropped to $3000.
The steps and passenger side of this M-38 have been altered.
“1952 Willys Jeep M-38
Motor 1978 Buick V-6 original
3 speed transmission and running gear
Gear Ratio 5.88
extras
Tow hitch and Winch Bumper
4 38×9.50 Super swampers on ultra type 61 rims
spare wheel (steel Rim)
full soft top with doors
bikini top
original seats
jerry can
aftermarket heater
components to make clutch hydraulic”
1948 CJ-2A McMillan, WI $3000
Runs, but needs work.
“Runs and drives but needs engine work. I have the original hood, gas tank and seat frame to go with. ”
1952 Wagon (on Kia Chassis) Corbett, OR **SOLD**
UPDATE: **SOLD** Was $4500.
I’m surprised this fits the Kia chassis as good as it does.
“1952 Willys Wagon 4×4. Clean title as a 1952 Willys wagon. It is a 1952 body on a 2000 Kia Sportage chassis. Fuel injected 4cylinder. 68k on the running gear and engine. Power windows up front. Runs and drives great. new 31×10.5×15 toyo mt tires. polished aluminum wheels with matching spare. swing spare tire mount. Rear air shocks with compressor plumbed in. Overdrive automatic transmission. Only Mobil 1 synthetic oil used in the engine. synthetic fluids in front, rear and transmission. Nice cd/mp3 player. clarion amp and sub. ”
1952 Truck Las Vegas, NV **Status Unknown**
UPDATE: Status Unknown** Was $4000.
This might make a good custom truck project.
“1952 willys pick up
351 cleveland zero miles. Fresh rebuild
Ford 9 inch rear end
4 speed manual trans.”
1949 Wagon Springfield, MO **SOLD**
UPDATE; **SOLD** Was $6000.
It’s a project.
“This is a very rare truck. It has been garage keep since it came off the road. Body and chasy in great shape no motor or transmission. All front end body parts are inside the truck as shown in the picture body is 100% complete.Will make a great project car. Have title in hand make and offer.”
Wagon Panel Kalispell, MT $350
Someone must need this.
“This is a new full right rear replacement panel for Willys wagons. Fits most waggons from 50s to early 60s”
1944 Photo of Nurses on Jeep in Corsica **SOLD**
UPDATE: **SOLD** Was on eBay
The nurse’s jeep stalled. It must not have been too hard to find GIs willing to help?
“L4 Yankee Nurses US Jeep in Corsica Italy WWII Original Acme Press Photo”
1969 Photo of Jackson, MN, Flood on eBay
This M-38 came to the rescue during a flood in Jackson, Minnesota.
“1969 FLOOD Workers Used Jeep to Haul Sandbags to Dike Jackson Press Photo. They strengthened a barrier holding back Des Moines River at the Red Owl Store. Photo is 10.5” x 7” in size.”
1962 Wagon Chattanooga, TN **SOLD**
UPDATE: **SOLD** Was $18,500.
Dan forwarded this beautiful wagon.
“1962 Willys 2DR Wagon, Complete restoration 3speed on column,4 Clyinder Asking 18,500”
1953 CJ-3B Rapid City, SD **SOLD**
UPDATE: **SOLD** Was $6500.
Looks solid.
“1953 Willys Jeep CJ3B Completely rebuilt. has a rebuilt 2.8 Chevy engine, power steering and power brakes. Warn winch mounted on the front. Great little Jeep!”
1964 CJ-3B Berthoud, CO **SOLD**
UPDATE: **SOLD** Was $5900
(09/13/2015) This was for sale back in 2012. Seems like a good price.
“1964 Willys Cj3B. This is the last year they built the 3B. Factory order only
Some Features:
Chevy 350 with high lift cam, approximately 350 horsepower.
Approximately 8000 miles
TH 400 Automatic Transmission
Warn Overdrive
17 gallon Stainless Steel gas tank
Hurst Shifter
Front Disc Brakes (New)
Dana 44 Rear
Body and Shackle lift 5″
35×12.50 BFG tires
Roll bar
Nerf bars”
1953 Truck Owasso, OK **SOLD**
UPDATE: **SOLD** Was $6500.
Looks good.
“1953 willys truck v8 Chevy enguine wt/30000 miles on enguine new clutch 4spds trans, 4like new 31 tires runs strong”
1951 Truck Kalispell, MT $17,000
Lots of diamond plate on this jeep.
“1951 Jeep Willy – frame off restoration/mod completed in 2014. This truck will surely turn heads when you’re driving it around. Sounds great and looks sharp.
Complete Body and Paint work.
Chassis custom mounted on 1978 Dodge Power Wagon.
New Motor 360 cid
727 Transmission (auto)
New Chrome stack exhaust
New Interior, Brakes
New Wheel Bearings
New Axles Seals
New Brake Lines
New Calipers
New Tires& Rims, 15 x 10 and 36″ Dick Cepek tires
Custom welded 6′ x 8′ flatbed with 3″ Steel Channels and custom wood 2″ x 6′ bed,
Full time 4 wheel drive with locker differentials.
832 miles since restoration.”
1946 CJ-2A Lakewood, CO $4000
Needs a couple things, but runs and drives.
“I am selling my 1946 willys cj2a. It’s mostly original has been converted to a floor shifter. 6v electrical system, most of the wiring is new. Runs and drives good but needs a new front right axle shaft and bushing as well as a few other minor things. Clean Wyoming title. I am asking 4000 but please feel free to make me an offer the worst I can say is no. Call or text only please, no emails.”
1947 CJ-2A Body Hardy, AR **SOLD**
UPDATE: **SOLD** Was $350.
May be some value here?
“BARNYARD FIND. 1947 WILLYS JEEP BODY THAT HAS A GOOD GRILLE. HOOD AND BOTH FRONT FENDERS ARE VERY USEABLE IF RESTORING ONE. ALSO GOOD DECORATOR ITEMS OR WOULD MAKE A GREAT BAR-B-Q GRILLE AND COULD PUT COOOLERS IN IT. LOOKS TERRIBLE, BUT HAS A LOT OF POSSIBILITIES. ”
1948 Drag Jeep Yuma, AZ **SOLD**
UPDATE: **SOLD** Was $38,000
“1948 willy’s jeep 350 small block chevy engine 750 horse power. All new paint,crome and interier.Well maintained very clean comes with extra set of paddle tires Asking $30,000 OBO”
Paul’s Stainless Wheel Covers
With winter settling into Alaska, Paul has returned to continue work on his Stainless M-38 (and a matching stainless trailer). I believe this is the 28th year of the project? Thanks for sharing Paul!
The black steel wheel in the photo below is one of 8 new wheels I purchased for the Willys (4 and a spare) and the M100 trailer (2 and a spare) so I need to modify these wheels to accept the stainless wheel discs I previously made. Each wheel will have 6 metal tabs (evenly spaced) welded to the outer face of the wheel with the tabs running from the outer bead flange to the raised inner ring around the lug nut area and each tab will have two nuts welded to the inner surface. These nuts will line up with holes drilled thru the stainless wheel discs to accept the wheel disc attach hardware and the tabs will provide additional support to hold the wheel discs while driving.
My original plan was to have only one nut per tab (so the wheel disc would be held on with six machine screws) but it’s much easier to weld two nuts to each tab while I’m making the parts than to have to add additional nuts and attach screws after the wheels have been powder coated just in case the discs wobble during rotation. I’ll try the 6 attach screws per wheel first and if the wheel discs stay smooth during driving I’ll leave the extra 6 nuts empty. If the disc shows any sign of instability while driving I’ll use all 12 screws to attach the disc for extra support.
1957 CJ-5 Sweethome, Or $1500
Here’s something special. It runs. You’d be the only one on the block with this rig.
“Most all work has din done and alot of new parts was in the process of restoring but I’m burnt out 4wheel drive all works run’s and drives all wiring is new motor was rebuild a few years ago clean title serious people onely may consider art trade call”
1953 Wagon Ruston, LA **Status Unknown**
UPDATE: **Status Unknown** Was $11,500. It might now be this one.
(08/16/2015) This wagon looks like fun.
“1953 CUSTOM WILLY’S OVERLAND JEEP CONVERTIBLE <<>> 327 CHEVY ENGINE <<>> 4-SPEED <<>> NEW PAINT <<>> NEW INTERIOR <<>> JUMP SEATS IN REAR <<>> HIDDEN STEREO SYSTEM IN GLOVE BOX <<>> 17″ CHROME WHEELS AND SPARE ON TAILGATE <<>> DRIVE ANYWHERE WITH NO ISSUES <<>> STRAIGHT BODY <<>> NEW RESTO”