I haven’t felt well today, so just a few updates. Rich shared these two articles related to JeepFest in Toledo this weekend. He tells that the local ABC affiliate is a sponsor, so he expects to see a few more stories.
1953 CJ-3A San Luis Obispo, CA **SOLD**
UPDATE: **SOLD** Was $14,500.
(07/19/2016) Cleanly refurbished.
“1953 CJ3a , Everything new……..metal tube, Like new 1953…..See it , you will like it…..Helping my friend by putting it on Craigslist for him……..He wants $14500.00 ….call me to see it. Vern”
1948 CJ-2A Canadohta Lake, PA **SOLD**
UPDATE: **SOLD** Was $7000
(06/23/2016) Has a couple updates. Looks nice.
“This is my 48 Jeep CJ2A. It’s all steel with 12 volt electrics. It has upgraded steering with locking hubs. It also has disc brakes on the front. It has a full soft top w/doors and a Bikini top. It also has a set of 4 “wagon wheel” rims.-See last pic for shot of rims and Bikini top. I also have some spare parts I got from the former owner. I’m only selling the Jeep cause I need to thin out the herd. She’s been sitting all winter so she could use a tune up. Clear antique title in hand.”
1946 CJ-2A Phoenix, AZ **SOLD**
UPDATE: **SOLD** Was $6500.
(11/24/2015) This has a funky roll bar setup, but the builder must have wanted to anchor the rear loops to the frame.
“Small block Chevy runs great. 4 speed manual transmission, twin stick transfer case, front disk brakes, rear drum brakes, power steering, locking hubs on all 4 wheels. Everything works great and jeep is mechanically sound. Runs, drives, tows and offroads great!”
1950 CJ-3A Allentown, PA **SOLD**
UPDATE: **SOLD** Was $9000
(07/29/2016) Looks good.
“we have a 1950 CJ3A Willys Jeep for sale that is all original and kept up to specs. Only interested need apply almost 16k invested first one with 8k gets her asap”
1951 Wagon Stockton, CA $3500
UPDATE: Still Available.
(01/31/2016) Need an engine at the very least.
“1951 WILLYS JEEP SEDAN DELIVERY MOUNTED ON1992 CHEVY S10 FRAME GOOD BODY. NO ENGINE 5 SPEED T5 CAMARO TRANS, NEW HEADMAN HEADERS FOR 350 ENGINE GREAT START FOR RARE STREET ROD OR A DIFFERENT RAT ROD.”
1948 CJ-2A Oklahoma City, OK **SOLD**
UPDATE: **SOLD** Was $2500.
(03/03/2015) The front wheels look out of alignment to me.
“48 Willys Jeep. Runs but needs some minor work. Windshield is cracked. Needs a new battery. Have title.”
1949 CJ-3A Washougal, WA **SOLD**
UPDATE: **SOLD** Was $1200.
(06/30/3016) There looks to be value here.
“Full rolling chassis with top and seats. Rear Dana 44 with power lock. New lift springs and shackles. Saginaw steering conversion. Body rough but ready for engine transplant and loads of fun. Clear title. Washougal classic jeep”
1957 CJ-6 Fayetteville, AR **SOLD**
UPDATE: **SOLD** Was $4000.
(03/30/2016) It’s a project.
“I have put a new 3 in lift on it and have done all the body work it’s ready for paint I have just lost interest in the project and looking to sell it does run and drive. I have the windshield frame”
1947 CJ-2A Rowlett, TX $2800
UPDATE: Still Available.
(06/01/2016) Doesn’t indicate if it runs or not.
“1947 Willys Jeep flat fender, 4cylinder flat top head, winch, tow bar, trailer available for $800 more, 4X4. Come look.”
Brian Hainer’s FC Corners
UPDATE: Go here to see some of Brian’s 3B body videos.
Brian Hainer has begun making some videos showing how he makes body parts out of sheet metal. He’s finished a couple videos already. He’ll soon be completing a series of videos on how to fabricate a complete Willys body.
Currently he has a set of three videos showing how he produced a corner piece for an FC-170.
Here are links to the subsequent videos for the FC corner:
https://www.youtube.com/watch?v=5klkL-1Vl8M
https://www.youtube.com/watch?v=rjax0KGZtpY
You can see all four of his videos and subscribe to his youtube channel at the link below:
Articles Covering the Toledo JeepFest This Weekend
Bob Christy landed on top of a Toledo Blade article providing build up to this weekend’s Toledo Jeepfest in Toledo: http://www.toledoblade.com/Automotive/2016/08/07/The-wind-in-your-hair-and-a-grille-full-of-mud.html
The Toledo Blade published a second article as well: http://www.toledoblade.com/Automotive/2016/08/07/Jeep-was-indispensable-to-Allied-victory.html
Justin’s Birthday Cake
Justin Paul’s wife Angela crafted this birthday cake for him. You can view other jeep-inspired cakes here: http://www.ewillys.com/tag/cakes/
1946 VEC CJ-2A Conroe, TX **SOLD**
UPDATE: **SOLD** Was $5500
“1946 WILLYS JEEP
VIN # = CJ2A12112
Almost perfect body for 1946 year model, no rust, looks great!
225 Dauntless V6 engine with new plugs, wires, & ignition coil
Headers & dual exhaust
T-90 3-Speed Transmission & PTO just rebuilt, very strong 4×4
Power steering
New gas tank and fuel filter
Complete brake job all 4 tires including master cylinder (2010)
Runs strong, but head Gasket needs replacing.
Aluminum rim oversized mag tires
2” Extension wheel spacers & new wheel studs/caps
Front wheel bearings recently replaced
Full roll cage with removable soft top & doors
Teal exterior with black interior, black accent paint
Black high-back bucket seats
Bed and undercarriage coating, black
Road legal (current plates & inspection)
Location — The Woodlands/Conroe, TX“
1943 MB Atlanta, GA **SOLD**
UPDATE: **SOLD** Was $8500.
Andy spotted this one.
“1943 Willys MB, runs and stops as it should. Jeep includes five original combat rims with new ND Coker tires. Lots of extra parts included. Lots of work has been done, drive as is or restore further. I will consider trades on antique motorcyles. I perfer pre 1950 bikes but later BMW, Guzzi, British rider may be considered, as well as side car rigs. Please email and i will respond quickly. Pic added, decals are magnetic and removable.”
1951 CJ-3A Newport, NH **SOLD**
UPDATE: **SOLD** Was $3500.
Could be a good price.
“I have a 1951 CJ3A. It has been my project for several years. I just have too many. This one is all but ready for the road. It literally only needs a seatbelt and it is road worthy. I just have not time to drive it and space is limited.
New electrical system
New suspension
New brake system
New tires
12v conversion done
Runs like a top! Excellent!!!”
1954 CJ-3B Nogales, AZ $4000
UPDATE: Price dropped to $4000.
(06/22/2016) For those zoo tours.
“Selling my 1954 jeep. Cj3b
Runs great. New coil. New carb kit. New points & condenser.
4cyl. Clean title.
$4200 obo. Need to sell now. Need the cash to fix my other car.”
http://tucson.craigslist.org/cto/5721362149.html
1947 CJ-2A Eagle, CO **SOLD**
UPDATE: **SOLD** Was $4500.
(07/19/2016) Includes a Warn winch and overdrive. Could be a great price.
“I purchased the Jeep in 1991. It was kept on my ranch in Meeker until 2012 when I sold the ranch and brought the Jeep back to Eagle.It has a Buick V-6 motor which I believe is either a 231 or 232 cubic inch. It also has a tilt steering column from the same vehicle. The jeep has a winch and a 3 speed transmission with a high/low splitter. It also comes with a full soft top and a bikini top. It has a top speed around 65 mph on the highway and is a lot of fun to drive off road. It has always been stored indoors while I’ve owned it. It’s at eagle auto consignment in eagle and can be seen anytime.”
1951 CJ-3A St. Louis, MO $11,400
Seller notes this is restored, but clearly it’s more in the category of refurbished. The photos of this jeep demonstrate the difficulty of evaluating jeeps based on pics. In pic #2, zooming in o nthe metal covering makes the driver’s side look like it has some indentations near the gas inlet. Yet, pic #1 clearly shows that area is flat. Now, whether the area under the plates are covering rust can’t be seen without an inspection visit.
“Vintage 1951 Willys Jeep. Fully restored. Completely rebuilt engine using Willys parts July 2016”
1952 M-38 Little Rock, AR $1500
Runs, no title.
“1952 M38 Jeep No title, does run has a 289 V-8 $1500.00 FIRM! Please call”
1960 CJ-5 Hayward, WI $3500
Has a Meyer top. Runs and drives. Might have a patched body.
“I have owned and driven for 11 years. Used primarily as a hunting vehicle for back woods use. I have extra pair of wheels/tires, Haynes repair manual. Manual transmission and H/L work. No power steering/brakes. Top can be removed.”
1944 MB Sedro Woolley, WA **SOLD**
UPDATE: **SOLD** Was $2500.
Not quite so all original as the seller thinks.
“All original 1944 Willies Jeep flathead 4 cylinder everything works $2500 obo trades”
2 CJ-5s Reno, NV **SOLD**
UPDATE: **SOLD** Was $1200.
Seller also has a “Willys”, but doesn’t include a pic of it.
“I have two jeeps for sale I have one that is a 1974 CJ and the other I believe is a 75 CJ the 74 is the white one that I have a title for.The orange one you will have to put in for lost title or use it for a Parts vehicle .. They both come with all the jeep parts that are at the garage. There are some transmissions transfer cases,lots of stuff. I bought them from a friend of mine that was moving in a big hurry.. Well he told me he was not coming back to NV.. I loaned him $1200 at the time and that’s what I want for the jeeps today.. I’m selling them as a package first come first serve. There is also a Willys that I have to anybody’s interested”
1946 CJ-2A Conifer, CO **SOLD**
UPDATE: **SOLD** Was $1000.
Has a running f-head.
“1946 CJ2A for parts or restoration. Most parts are there, obviously it’s a bit rough. Has good running F-Head 134 Hurricane engine from later CJ. Windshield frame is complete but will need some attention, glass is plastic. This was originally a rare column shift model – some of the shifter parts are still there. Has transmission and transfer case. No seat frames. Many of the parts will fit CJ3A and CJ3B Jeeps (CJ-3A, CJ-3B)
VIN on clear title matches frame plate, but the firewall plate is gone. New ones are available, though.
Asking $1,000 with the motor, $750 without motor. $550 for only the running F-head engine.”
1947 CJ-2A Marshall’s Creek, PA **SOLD**
UPDATE: **SOLD** Was $2300.
Powered with a Studebaker 6.
“Up for sale is a 1947 CJ2A Willys Jeep. I don’t have the space to store this Jeep inside for another winter and have other projects in progress. This jeep was an old Western Union vehicle and currently has a clean PA title. The engine is a 1953 (roughly) 170ci Studebaker flathead 6 cylinder. Transmission and transfer case are original.
Recent new parts include:
Tires
headlights, tail lights, turn signals, and switch (all working street legal)
professionally installed wiring harness and 12 volt conversion
front and rear shocks
fuel pump and line
Cap / Rotor / Wires/ Points
Jeep needs:
-Carb rebuild: this Jeep does run but will not idle and the carb leaks fuel. The carb is a carter bb-1 with manual choke.
-Body work: as you can see in the photos, the body tub has been patched and could use some work if you are looking for a show Jeep. The frame is in very good shape.
-I do recall the throwout bearing making some noise at idle in neutral but the jeep shifts in and out of gear and into 4×4 without issue. ”